Register Here For Trade Account

Solar Panel Fitting & Mounting Kits

  • Staubli MC4 Pre terminated cable 5m (1 Pack)

    Staubli MC4 Pre terminated cable 5m (1 Pack)

    Part No: MC4-5M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-50021 Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

    £12.06

  • Staubli MC4-Evo 2 Y-Splitter

    Staubli MC4-Evo 2 Y-Splitter

    Part No: MC4-Y-CONN-FEM Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0334 Weight: 0.25 kg

    £16.56

  • Staubli MC4-Evo 2 Y-Splitter

    Staubli MC4-Evo 2 Y-Splitter

    Part No: MC4-Y-CONN-MAL Cables - Connectors mC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0333 Weight: 0.25 kg

    £17.05

  • Elettro Brescia 4mm2 single-core DC cable 25m - Black

    Elettro Brescia 4mm2 single-core DC cable 25m - Black

    Part No: CABLE4-1-25 Cables - DC Cables 4 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-25 Weight: 1.365 kg Length: 25 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £19.78

  • Staubli MC4 Y Splitter Male and Female Variants (Pack of Pairs)

    Staubli MC4 Y Splitter Male and Female Variants (Pack of Pairs)

    Part No: MC4-SPL-Y-CONN Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm² MC-4 splitter kit, consisting of: MC4-Y-CONN-FEM and MC4-Y-CONN-MAL For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SYPL2, Stäubli, PV Cable   Weight: 0.5 kg

    £33.60

  • Elettro Brescia 4mm2 single-core DC cable 50m - Black

    Elettro Brescia 4mm2 single-core DC cable 50m - Black

    Part No: CABLE4-1-50 Cables - DC Cables 4 mm², single-core, black, 50m NEW H1Z2Z2-K certified 50m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety.    Supplier Part No: CABLE4-1-50 Weight: 2.675 kg Length: 50 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £33.40

  • Elettro Brescia 4mm2 single-core DC cable 100m - Black

    Elettro Brescia 4mm2 single-core DC cable 100m - Black

    Part No: CABLE4-1-100 Cables - DC Cables 4 mm², single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-100 Weight: 5 kg Length: 100 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £64.30

  • Elettro Brescia 4mm2 single-core DC cable 250m - Black

    Elettro Brescia 4mm2 single-core DC cable 250m - Black

    Part No: CABLE4-1-250 Cables - DC Cables 4 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-250 Weight: 14.81 kg Length: 250 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £157.00

  • Elettro Brescia 4mm2 single-core DC cable 500m - Black

    Elettro Brescia 4mm2 single-core DC cable 500m - Black

    Part No: CABLE4-1-500 Cables - DC Cables 4 mm², single-core, black, 500m NEW H1Z2Z2-K certified 500m solar cable with length label. Supplied on a reusable spool. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: 26036 Weight: 30 kg Length: 500 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

    £248.00

  • Elettro Brescia 6mm2 single-core DC cable 500m - Black

    Elettro Brescia 6mm2 single-core DC cable 500m - Black

    Part No: CABLE6-1-500 Cables - DC Cables 6 mm², single-core, black, 500m 500m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 6 mm²  (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.  Important Alternative cable is BC-CABLE6-1-500 Supplier Part No: 26038 Weight: 38 kg Length: 500 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

    £440.50

  • Elettro Brescia 6mm2 single-core DC cable 1000m - Black

    Elettro Brescia 6mm2 single-core DC cable 1000m - Black

    Part No: CABLE6-1-1000 Cables - DC Cables 6 mm², single-core, black, 1000m NEW H1Z2Z2-K certified 1000m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human.   Supplier Part No: CABLE6-1-1000 Weight: 74 kg Length: 1,000 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

    £859.00

  • Emlite Bi-Directional 3-ph generation meter EMP.az, 100A (1000 pulse/kWh)

    Emlite Bi-Directional 3-ph generation meter EMP.az, 100A (1000 pulse/kWh)

    Part No: EMP1-AZ Meters - Three Phase Generation Meters Part of the Emlite three phase metering range which offers superb meters for a wide range of applications where basic metering is needed. They are of high quality and  sturdy construction with features normally found in more expensive meters. Product Features Accuracy Class A and B 4 quadrant energy measurement Optional power quality information Configurable pulsed outputs Clear and easy to read LCD display Solid Brass terminals Optional finger guard for main terminals Does not come with CT's. Supplier Part No: EMP1-AV Weight: 1.054 kg

    £99.30

  • Iskra MT174 3 Phase 4 wire 120A

    Iskra MT174 3 Phase 4 wire 120A

    Part No: ISK-MT174 Meters - Three Phase Generation Meters The MT174 electronic three-phase meters are designed for measurement and registration of active, reactive and apparent energy and demand in three-phase four-wire networks Multi-tariff c\w internal time switch 120A Three Phase/Single Phase kWh meter OFGEM Approved - Import/Export Energy Tariff control input Small size modern design Pulse output Max Demand Low Profile   Supplier Part No: MT174-Direct Weight: 1 kg

    £93.70

  • SDM120DB-MID Single-Phase DIN Rail Mounted Digital Meter With Back Light

    SDM120DB-MID Single-Phase DIN Rail Mounted Digital Meter With Back Light

    Part No: SDM120DB Meters - Single Phase Generation Meters SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D - single direction range, work directly connected to a maximum load 45A AC circuit.  This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured 45A Direct Connection Pulse Output 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm Warning: This is a DIN rail mounted meter and will need to be housed in a DIN rail enclosure   Supplier Part No: SDM120DB Weight: 0.081 kg

    £27.55

  • Emlite 1-ph generation meter 100A (1000 pulse/kWh) incl. Extended Cover

    Emlite 1-ph generation meter 100A (1000 pulse/kWh) incl. Extended Cover

    Part No: EM-ECA2 Meters - Single Phase Generation Meters Emlite Single Phase Total Generation Meter 100A with Pulse Output The ECA2 single phase meter is one of the worlds most compact metering units The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8×3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable   Part Code: ECA2.v     Does not come with CT's. Supplier Part No: ECA2VETC Weight: 0.305 kg

    £33.70

  • Dektite Aluminium Multicable Solar Flashing (Tiled or Slate)

    Dektite Aluminium Multicable Solar Flashing (Tiled or Slate)

    Part No: SDA10MB Mounting - Cable Flashings Don't risk roof leaks and cable damage by pushing unprotected cables under the tiles or slates. The MCS INstallation Guide for PV requires that cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. The Dektite Multicable is a simple, effective and universal way to ensure this requirement is met. At the same time it protects cables from damage through contact with other roof materials. The economical soft temper aluminium base  is ideal for slate or plain tile roof. Base 450 x 600mm. Dektite Multicable - Alminium base - SDA10MB * Durable purpose made weatherproofing product as per MCS * Fits all types of tile or slate roof * Quick and easy to install - only tool needed cable snips * Protects up to 10 cables from damage * Low cost  Aluminium base - ideal for plain tile or slate roof * 20 year warranty   Keywords: Deks, PV Mounting, Cable Flashing   Supplier Part No: SDA10MB Weight: 0.97 kg

    £26.24

  • Renusol Cable support 90°

    Renusol Cable support 90°

    Part No: REN-900260 Mounting - Cable Clips 15x12x10 mm Material thickness: 1,5 mm Usable with: Framed modules   Supplier Part No: 900260 Weight: 0.01 kg

    £0.53

  • Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover-Powerland

    Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover

    Part No: EM-ECA2-BI Meters - Single Phase BiDirectional Generation Meters Emlite Single Phase Bi-Directional (Import/Export) Total Generation Meter 100A with Pulse Output Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values.    NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.  This meter meets the “Bi-directional meter” criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)’  document released by OFGEM.   Part Code: ECA2.nz Important This is a bi-directional generation meter for hybrid inverters, please delete standard generation meter from your order if using this.  Supplier Part No: ECA2NET ETC Weight: 1.22 kg

    £34.90

Forgot Password


Back to top