Victron
Victron Energy Solar connector pair MC4, 1x Male/1x Female – SCA520300000
Solar connector pair MC4, 1x Male/1x Female Brand Victron Energy Manufacturer Part Number SCA520300000 Warranty 5 Years
£6.87
Victron Energy MPPT WireBox-XL MC4 for 150-85/100 & 250-85/100 VE.Can – SCC950400310
The MPPT WireBox provides an extra level of safety, and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws. Brand Victron Energy Manufacturer Part Number SCC950400310 Warranty 5 Years
£27.50
Victron Energy Wall mounted enclosure for Color Control GX – ASS050400000
Wall mount enclosure for Color Control GX CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS050400000 Dimensions H163 x W135 x D72mm Warranty 5 Years
£24.07
Victron Energy Smart Battery Sense Long Range 10-meters for MPPT Solar Chargers – SBS050150200
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life. Improves battery charging By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells. Look no wires The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network – a wireless technology based on Bluetooth Smart. Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app. Tidy, simple – smart Installation is simple, quick and tidy. Just connect the unit’s two eyelets to your battery terminals and attach the Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip. Brand Victron Energy Manufacturer Part Number SBS050150200 Operating Voltage Range 8-60V Absolute Maximum Voltage 65V Cable Length 45cm Dimensions H14 x W38 x D38mm Warranty 5 Years
£29.79
Victron Energy MagCode Power Clip 12V (max. 15A) – BPC900500014
MagCode Power Clip 12V (max. 15A) Brand Victron Energy Manufacturer Part Number BPC900500014 GTIN 8719076046578 Warranty 5 Years
£27.50
Victron Energy EV Charging Station - EVC300400300
The EV Charging Station has three phase and single-phase capabilities. It delivers maximum 22kW AC in three phase mode or 7.3kW in single phase mode. It incorporates 4.3-inch LCD touch screen for monitoring and control. Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance. GTIN 8719076051305 Input Voltage Range 170 – 265V AC Rated Charge Current 32A / phase Nominal Power 22kW Current Output Range 6 – 32A Data Communication Modbus TCP over WIFI Protection Category IP44 Dimensions H390 x W300 x D150mm Weight 3Kg Warranty 5 Years
£596.64
Victron Energy 2 meter extension cable – BPC900200014
The 2 meter extension cable is an accessory of the Blue Power IP65 Charger with DC connector. Brand Victron Energy Manufacturer Part Number BPC900200014 Warranty 5 Years
£6.10
Victron Energy M8 eyelet connector (with 30A ATO fuse) – BPC900110014
M6/M8 eyelet connector with fuse The M6/M8 eyelet connector with fuse is an accessory of the Blue Power IP65 Charger with DC connector. Brand Victron Energy Manufacturer Part Number BPC900110014 Warranty 5 Years
£5.49
Victron Energy M6 eyelet connector (with 30A ATO fuse) – BPC900100014
The M6/M8 eyelet connector with fuse is an accessory of the Blue Power IP65 Charger with DC connector Brand Victron Energy Manufacturer Part Number BPC900100014 Warranty 5 Years
£5.49
Victron Energy VE.Can RJ45 terminator (2 pack) – ASS030700000
The VE.Can RJ45 terminator comes in a bag of two when ordered separately. The terminators are also included with some products, for example with the CANUSB. Brand Victron Energy Manufacturer Part Number ASS030700000 Warranty 5 Years
£6.10
Victron Energy VE.Can Power Cable – ASS030690000
When the CAN bus is not powered by a Skylla-I or a MPPT, you will need the new VE.Can Power Cable to supply the power. Brand Victron Energy Manufacturer Part Number ASS030690000 Warranty 5 Years
£22.68
Victron Energy RS485 to USB interface cable 1.8m – ASS030572018
RS485 to USB interface, available in 1.8 m and 5 m. Brand Victron Energy Manufacturer Part Number ASS030572018 Cable Length 1.8m Warranty 5 Years
£21.38
Victron Energy VE.Direct to RS232 interface – ASS030520500
VE.Direct to RS232 interface Brand Victron Energy Manufacturer Part Number ASS030520500 Warranty 5 Years
£21.38
Victron Energy RS232 to USB Converter – ASS030200000
RS232 to USB converter cable. Brand Victron Energy Manufacturer Part Number ASS030200000 Warranty 5 Years
£22.90
Victron Energy Interface MK2.2b (VE.Bus to RS232) – ASS030120210
The MK2.2 and MK3 provide a galvanically isolated connection to VE.Bus, and it translates the VE.Bus protocol into the “MK2/MK3 Protocol” Brand Victron Energy Manufacturer Part Number ASS030120210 GTIN 8719076019404 Warranty 5 Years
£43.52
Victron Energy VE.Can to NMEA2000 Micro-C male – ASS030520200
Use this cable to connect a Victron product with a VE.Can port to a NMEA2000 network. Brand Victron Energy Manufacturer Part Number ASS030520200 Warranty 5 Years
£48.11
Victron Energy CANUSB Interface – ASS030532010
The CANUSB interface is used to connect a VE.Can product to a computer. Brand Victron Energy Manufacturer Part Number ASS030532010 Warranty 5 Years
£389.45
Victron Energy Interface MK3-USB (VE.Bus to USB) – ASS030140000
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port. Brand Victron Energy Manufacturer Part Number ASS030140000 Warranty 5 Years
£54.98
Victron Energy Interface MK2-USB (for Phoenix Charger only) – ASS030130010
Victron Energy MK2 interface module to connect PC to Phoenix. For use with v18 software and Phoenix chargers only. Brand Victron Energy Manufacturer Part Number ASS030130010 GTIN 8719076019428 Weight 0.06Kg Warranty 5 Years
£58.80
Victron Energy Direct to USB Cable – ASS030530010
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX. Brand Victron Energy Manufacturer Part Number ASS030530010 Warranty 5 Years
£21.38
Victron Energy VE.Direct to BMV60xS Cable 3m – ASS030532230
VE.Direct to BMV60xS Cable 3m Brand Victron Energy Manufacturer Part Number ASS030532230 GTIN 8719076019763 Cable Length 3m Warranty 5 Years
£19.86
Victron Energy USB extension cable 0.3m one side right angle – ASS060000100
Some of the USB plugs on our cables are too long to fit in the Wall mount box with a Color Control GX. Use this USB extension cable. Available in 0,3 m length. Brand Victron Energy Manufacturer Part Number ASS060000100 Cable Length 0.3m Warranty 5 Years
£4.88
Victron Energy Wall mounted enclosure for Color Control GX and BMV or MPPT – ASS050600000
Easily mount a BMV and MPPT Control on a wall. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS050600000 Dimensions H244 x W135 x D75mm Warranty 5 Years
£26.82
Victron Energy Wall Mount Enclosure for BMV or MPPT Control – ASS050500000
Wall mount enclosure for BMV or MPPT Control CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS050500000 Dimensions H88 x W130 x D47mm Warranty 5 Years
£16.50
Victron Energy Wall mount enclosure for 65 x 120 mm GX-panels – ASS050300010
Wall mount enclosure for 65 x 120mm GX panels CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS050300010 Dimensions H88 x W130 x D40mm Warranty 5 Years
£17.88
Victron Energy Anti-islanding relay UFR1001E – REL100100000
The UFR1001E monitors voltage and frequency in plants for own generation of electricity. It fulfills the requirements of VDE-AR-N 4105 bdew-directive, G59/3, G83/2 and ÖVE/ÖNORM E 8001-4-712:2009 for generators connected to the public grid. Brand Victron Energy Manufacturer Part Number REL100100000 Dimensions H90 x W105 x D69mm Weight (kg) 0.25 Warranty 5 Years
£627.71
Victron Energy Active GPS Antenna – GSM900200100
Active GPS Antenna Brand Victron Energy Manufacturer Part Number GSM900200100 Warranty 5 Years
£23.68
Victron Energy GX LTE 4G-E – GSM100100400
The GX LTE 4G is a cellular modem for Victron’s GX range of monitoring products. It provides a mobile internet connection for the system and connection to the VRM Portal. It works on 2G, 3G and 4G networks. There are multiple models, refer to the manual to see which model best matches the available cellular network bands in your area. It requires a SIM card of the Mini-SIM format; and connects to the GX device with an included 1 meter USB cable. The GX LTE includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number GSM100100400 GTIN 8719076052937 Voltage Range 8-70VDC Antenna Connector Type SMA Female SIM Card Regular Mini SIM Dimensions L106 × W42.5 × H22mm Warranty 5 Years
£177.16
Victron Energy Outdoor 4G GSM Antenna – GSM900100400
This antenna is optimised for 4G frequency bands, and as such will have slightly better reception on the 4G network. Brand Victron Energy Manufacturer Part Number GSM900100400 GTIN 8719076052951 Weight 0.01Kg Warranty 5 Years
£23.68
Victron Energy Outdoor 2G and 3G GSM Antenna – GSM900100100
Outdoor 2G and 3G GSM Antenna Brand Victron Energy Manufacturer Part Number GSM900100100 Warranty 5 Years
£23.68
Victron Energy VE.Bus Smart Dongle – ASS030537010
The VE.Bus Smart dongle is two products in one: First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes. Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models, and is especially useful in combination with the MultiPlus-II, as it does not have on-board terminals for Voltage- and Temperature sense wiring For monitoring, the device is a great alternative in caravans, smaller yachts and motor homes for which the Color Control GX or Venus GX are a step too far CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS030537010 Warranty 5 Years
£71.01
Victron Energy VE.Can resistive tank sender adapter – BPP900600100
The VE.Can resistive tank sender adapter allows a standard resistive tank level sender to connect to the Color Control GX. It is compatible with both European standard 0-180 Ohm and United States standard 240-30 Ohm tank level senders and is accurate to ±1%. It is easily configurable to resistive senders from fuel, fresh water, waste water, well water, oil and black water (sewage) tanks. It supports up to 16 tanks of each type. The unit is a simple setup with two small rotary switches and it gets its power from the VE.Can network. When you use a Skylla-i or a MPPT with CAN bus in the system, the power to the CAN bus will be supplied by either one of them. When the CAN bus is not powered by a Skylla-I or a MPPT, you will need the new VE.Can Power Cable to supply the power. Brand Victron Energy Manufacturer Part Number BPP900600100 Warranty 5 Years
£252.00
Victron Energy Temperature sensor type C – ASS000020000
Spare battery temperature sensor for the Inverter RS Smart Solar. Brand Victron Energy Manufacturer Part Number ASS000020000 GTIN 8719076048039 Products Supported Inverter RS Smart Solar Temperature on VRM No VE.Smart Networking No Warranty 5 Years
£15.28
Victron Energy Temperature sensor QUA/PMP/Venus GX – ASS000001000
Temperature sensor QUA/PMP/Venus GX Brand Victron Energy Manufacturer Part Number ASS000001000 Warranty 5 Years
£13.49
Victron Energy Current Transformer 100A:50mA for MultiPlus-II (5m) – CTR110000550
Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. Maximum current: 32A. Brand Victron Energy Manufacturer Part Number CTR110000500 Weight (kg) 0.06 Warranty 5 Years
£28.17
Victron Energy Current Transformer 100A:50mA for MultiPlus-II – CTR110000500
Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. Maximum current: 32A. Brand Victron Energy Manufacturer Part Number CTR110000500 Weight (kg) 0.06 Warranty 5 Years
£25.41
Victron Energy AC Current sensor – single phase – max 40A – CSE000100000
Use the AC Current sensor to measure and visualise the solar production of a PV Inverter. The measurements will be visible on the GX device and on the VRM Portal. The sensor is a simple external current sensor, which measures AC Current. Together with the voltage measurements is calculated into Apparent Power (VA) and Energy (kWh). The sensor can be wired to either the AUX input or the Temperature-input of Multi and Quattro inverter/chargers. The AC Current Sensor is one out of multiple options to visualise the solar yield in a Victron system CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number CSE000100000 Warranty 5 Years
£37.41
Victron Energy Zigbee to USB Converter – ASS300420200
Zigbee to USB converter CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number ASS300400200 Power USB Port 5V Dimensions H70 x W50 x D24mm Warranty 5 Years
£74.83
Victron Energy Zigbee to RS485 converter – ASS300420100
Zigbee to RS485 converter CLICK HERE FOR SPEC SHEET gtin 8719076048268 Brand Victron Energy Manufacturer Part Number ASS300420100 Warranty 5 Years Dimensions H70 x W50 x D24mm Protoco Zigbee2007 Distance Visible, open transmission distance : 1600 meters
£86.23
Victron Energy Energy Meter EM24 – 3 phase – max 65A/phase – REL200100000
The EM24 is for 3 phase monitoring only. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX. The Energy Meter can be used as a: Grid meter, and used as control input for an ESS System. Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL200100000 Warranty 5 Years
£177.76
Victron Energy Energy Meter ET340 – 3 phase – max 65A/phase – REL300300000
The ET340 (for three phase max. 65A) Energy Meter is typically used in an Energy Storage System. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal. The Energy Meter can be used to: Grid meter, and used as control input for an ESS System (1). Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL300300000 Warranty 5 Years
£129.00
Victron Energy Energy Meter ET112 – 1 phase – max 100A – REL300100000
The ET112 (for single phase max. 100A) Energy Meter is typically used in an Energy Storage System. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal. The Energy Meter can be used for four things: Grid meter, and used as control input for an ESS System (1). Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL300100000 Warranty 5 Years
£65.68
Victron Energy Energy Meter EM24 – 3 phase – max 65A/phase Ethernet – REL200200100
The EM24 is for 3 phase monitoring only. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX. The Energy Meter can be used as a: Grid meter, and used as control input for an ESS System. Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL200200100 GTIN 8719076051268 Warranty 5 Years
£212.19
Victron Energy CCGX WiFi module simple (Nano USB) – BPP900100200
This nano USB WiFi dongle is software compatible with the Colour Control GX unit – (many similar standard dongles are not compatible due to driver support so please check), adding Wireless LAN connectivity where running a network cable to router or access point is unsuitable. Brand Victron Energy Manufacturer Part Number BPP900100200 Warranty 5 Years
£13.44
Victron Energy CANvu GX IO Extender and wiring kit – BPP900800100
CANvu GX IO Extender and wiring kit. Brand Victron Energy Manufacturer Part Number BPP900800100 Warranty 5 Years
£131.40
Victron Energy GX Touch 50 Wall Mount – BPP900465050
The GX Touch wall mount accessory allows easy mounting of the GX Touch 50 on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number BPP900465050 GTIN 8719076054078 Dimensions L128.1 x W87 x D24.4mm Warranty 5 Years
£9.17
Victron Energy GX Touch 50 adapter for CCGX cut-out – BPP900460050
The GX Touch 50 is the display accessory for the Cerbo GX. The five inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Simply mounted The GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the ColorControl GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. The GX Touch 50 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number BPP900460050 GTIN 8719076053668 Warranty 5 Years
£15.28
Victron Energy DIN35 adapter small (2 pcs) – ADA500100100
DIN-Rail adapter to easily mount a device on a DIN-Rail. Suitable for the Cerbo GX. Brand Victron Energy Manufacturer Part Number ADA500100100 GTIN 8719076048640 Warranty 5 Years Country of Manufacture India
£8.55
