Inverters

Manufacturer.   Solis Accessory Product Type.     Communication Commodity Code.      85437090 Dimensions.    (mm) (H x W x D)128 x 50 x 34

Read more less

Part No: MC4-CONN14-2PACK Cables - Connectors  A pack of 2x Male and 2x Female cable couplers  (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm²   Rated current: 39 A (for 4 and 6mm2 cable) Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min)  Cross section: 4 - 6 mm² Outer diameter cable (dA): 5,0 - 6.0mm Connectors 32.0014P0001-UR and 32.0015P0001-UR are used in this kit. Please use correct MC4 approved tools to crimp these connectors on to bare cables.  Keywords: MC4CONN2PACK, Multi Contact, PV Cable   Supplier Part No: 100038968 Weight: 0.06 kg Rated Power: 250 W

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% CT Clamps and WiFi stick are included in the box. A second CT will be required if there's another generator set (i.e PV, wind or other). A meter will be required for >30m distance between inverter and incoming power connection point. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. Supplier Part No: FE-H1-5.0-G2 Weight: 22 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 5,500 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh   Ultra Performance High PV Input Capability Supports up to 150% oversizing to allow maximum annual generation. Peak Efficiency Achieves up to 97.6% maximum efficiency, ensuring minimal energy loss and maximum output. Powerful Charge and Discharge Handles up to 100A (5kW) charge/discharge from batteries allowing fast charging and covering larger loads. Reliable Operation Emergency Power Supply (EPS) Backup power is available for critical installations that require uninterrupted operation during power outages. Rapid Switch Time Switches to backup power in less than 10 milliseconds, providing uninterrupted power supply during outages. Shadow Scan Feature Protects the system performance by allowing non shaded panels to operate fully when some panels are in shade. Smart Energy Management Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control.   Octopus Tariff Integration Compatible with Auto Octopus energy pricing, reducing energy costs by utilising cheaper rates. Smart Weather Compensation Automatically adjusts settings in response to weather conditions to maximise energy efficiency.   HANCHU ESS - SINGLE PHASE HYBRID INVERTER - CLICK HERE FOR FEATURES   12 Years Warranty On All Hanchu Products. All Hanchu products are 12 years warranty with an incredible RMA National service to strengthen the product even more. HESS-HY-S-5.0K The HESS-HY-S series is a single-phase inverter specifically designed for residential homes, supporting multi-unit parallel operation and perfectly compatible with the Hanchu LV series batteries. It includes multiple power options of 3/3.68/4/5/6kW, catering to various scales and application scenarios. Technical Specifications PV Input Max. PV array power : 7500Wp Max. input voltage : 550V MPPT voltage range / rated input voltage : 40V to 530V/380V Min. input voltage / start voltage : 40V/50V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 16A Max. short-circuit current per MPP tracker : 20A Battery Input Nominal battery voltage : 48V/51.2V Battery voltage range : 40V to 60V Max. charging / discharge power : 5000W/5000W Max. charging current / Max. discharging current : 100A/100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 180V to 280V/230V Rated AC grid frequency : 50Hz / 60Hz Rated apparent power : 5000VA Max. apparent power : 5000VA Rated grid output current (@230V) : 21.7A Max. grid output current : 22.7A AC Input Rated grid voltage : a.c.230V Rated apparent power : 6000VA Max. input apparent power from grid : 6000VA Rated input curent from grid : a.c.26.1 A Max. input current from grid : a.c.27.3 A EPS Output Nominal output voltage : 230V Nominal output frequency : 50 Hz/ 60Hz Rated apparent power : 5000VA Max. output apparent power : 5000VA Peak output apparent power : 7500 VA | 10s Max. output current : 21.7A Max. switch time : ≤10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97%/97.6% Max. battery to load efficiency : 94.70% General Data Dimensions (W*H*D) (mm) : 483*455*193.5 Device weight : 25.1Kg Operating temperature range : -25℃ ~60℃ Noise emissions (typical) : 30 dB(A) Standby consumption : ＜10 W Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : RS485 / CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/4G/Bluetooth Other communication : DRM Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/G98/G99/G100/VDE 4105/VFR 2019/NRS 097/CEI 0-21/NTS/IEC 61683/IEC 61727/IEC 62116 Warranty : 12 years

Read more less

Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Ultra Performance High PV Input Capability Supports up to 150% oversizing to allow maximum annual generation. Peak Efficiency Achieves up to 97.6% maximum efficiency, ensuring minimal energy loss and maximum output. Powerful Charge and Discharge Handles up to 100A (5kW) charge/discharge from batteries allowing fast charging and covering larger loads. Reliable Operation Emergency Power Supply (EPS) Backup power is available for critical installations that require uninterrupted operation during power outages. Rapid Switch Time Switches to backup power in less than 10 milliseconds, providing uninterrupted power supply during outages. Shadow Scan Feature Protects the system performance by allowing non shaded panels to operate fully when some panels are in shade. Smart Energy Management Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control.   Octopus Tariff Integration Compatible with Auto Octopus energy pricing, reducing energy costs by utilising cheaper rates. Smart Weather Compensation Automatically adjusts settings in response to weather conditions to maximise energy efficiency.   HANCHU ESS - SINGLE PHASE HYBRID INVERTER - CLICK HERE FOR FEATURES   12 Years Warranty On All Hanchu Products. All Hanchu products are 12 years warranty with an incredible RMA National service to strengthen the product even more. HESS-HY-S-6.0K The HESS-HY-S series is a single-phase inverter specifically designed for residential homes, supporting multi-unit parallel operation and perfectly compatible with the Hanchu LV series batteries. It includes multiple power options of 3/3.68/4/5/6kW, catering to various scales and application scenarios. Technical Specifications PV Input Max. PV array power : 9000Wp Max. input voltage : 550V MPPT voltage range / rated input voltage : 40V to 530V/380V Min. input voltage / start voltage : 40V/50V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 16A Max. short-circuit current per MPP tracker : 20A Battery Input Nominal battery voltage : 48V/51.2V Battery voltage range : 40V to 60V Max. charging / discharge power : 5000W/5000W Max. charging current / Max. discharging current : 100A/100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 180V to 280V/230V Rated AC grid frequency : 50Hz / 60Hz Rated apparent power : 6000VA Max. apparent power : 6000VA Rated grid output current (@230V) : 26.1A Max. grid output current : 27.3A AC Input Rated grid voltage : a.c.230V Rated apparent power : 6000VA Max. input apparent power from grid : 6000VA Rated input curent from grid : a.c.26.1 A Max. input current from grid : a.c.27.3 A EPS Output Nominal output voltage : 230V Nominal output frequency : 50 Hz/ 60Hz Rated apparent power : 5000VA Max. output apparent power : 5000VA Peak output apparent power : 7500 VA | 10s Max. output current : 21.7A Max. switch time : ≤10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97%/97.6% Max. battery to load efficiency : 94.70% General Data Dimensions (W*H*D) (mm) : 483*455*193.5 Device weight : 25.1Kg Operating temperature range : -25℃ ~60℃ Noise emissions (typical) : 30 dB(A) Standby consumption : ＜10 W Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : RS485 / CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/4G/Bluetooth Other communication : DRM Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/G98/G99/G100/VDE 4105/VFR 2019/NRS 097/CEI 0-21/NTS/IEC 61683/IEC 61727/IEC 62116 Warranty : 12 years

Read more less

Compatible Products Hanchu Low Voltage Battery 3.2kWh Hanchu Low Voltage Battery 3.68kWh Hanchu Low Voltage Battery 5.12kWh Hanchu Low Voltage Battery 9.4kWh Ultra Performance High PV Input Capability Supports up to 150% oversizing to allow maximum annual generation. Peak Efficiency Achieves up to 97.6% maximum efficiency, ensuring minimal energy loss and maximum output. Powerful Charge and Discharge Handles up to 100A (5kW) charge/discharge from batteries allowing fast charging and covering larger loads. Reliable Operation Emergency Power Supply (EPS) Backup power is available for critical installations that require uninterrupted operation during power outages. Rapid Switch Time Switches to backup power in less than 10 milliseconds, providing uninterrupted power supply during outages. Shadow Scan Feature Protects the system performance by allowing non shaded panels to operate fully when some panels are in shade. Smart Energy Management Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control.   Octopus Tariff Integration Compatible with Auto Octopus energy pricing, reducing energy costs by utilising cheaper rates. Smart Weather Compensation Automatically adjusts settings in response to weather conditions to maximise energy efficiency.  HANCHU ESS - SINGLE PHASE HYBRID INVERTER - CLICK HERE FOR FEATURES   12 Years Warranty On All Hanchu Products. All Hanchu products are 12 years warranty with an incredible RMA National service to strengthen the product even more. HESS-HY-S-3.68K The HESS-HY-S series is a single-phase inverter specifically designed for residential homes, supporting multi-unit parallel operation and perfectly compatible with the Hanchu LV series batteries. It includes multiple power options of 3/3.68/4/5/6kW, catering to various scales and application scenarios. Technical Specifications PV Input Max. PV array power : 6180Wp Max. input voltage : 550V MPPT voltage range / rated input voltage : 40V to 530V/380V Min. input voltage / start voltage : 40V/50V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 16A Max. short-circuit current per MPP tracker : 20A Battery Input Nominal battery voltage : 48V/51.2V Battery voltage range : 40V to 60V Max. charging / discharge power : 5000W/5000W Max. charging current / Max. discharging current : 100A/100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 180V to 280V/230V Rated AC grid frequency : 50Hz / 60Hz Rated apparent power : 3680VA Max. apparent power : 3680VA Rated grid output current (@230V) : 16A Max. grid output current : 16A AC Input Rated grid voltage : a.c.230V Rated apparent power : 6000VA Max. input apparent power from grid : 6000VA Rated input curent from grid : a.c.26.1 A Max. input current from grid : a.c.27.3 A EPS Output Nominal output voltage : 230V Nominal output frequency : 50 Hz/ 60Hz Rated apparent power : 5000VA Max. output apparent power : 5000VA Peak output apparent power : 7500 VA | 10s Max. output current : 21.7A Max. switch time : ≤10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97%/97.6% Max. battery to load efficiency : 94.70% General Data Dimensions (W*H*D) (mm) : 483*455*193.5 Device weight : 25.1Kg Operating temperature range : -25℃ ~60℃ Noise emissions (typical) : 30 dB(A) Standby consumption : ＜10 W Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : RS485 / CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/4G/Bluetooth Other communication : DRM Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/G98/G99/G100/VDE 4105/VFR 2019/NRS 097/CEI 0-21/NTS/IEC 61683/IEC 61727/IEC 62116 Warranty : 12 years

Read more less

The Libbi battery top cover acts as a cosmetic piece when installing a 15/20kW system. With the batteries sitting in two banks of two, the set without the inverter on top would have handles visibly showing on the top. The top cover covers these handles.

Read more less

Higher incomes: select the electricity consumption mode in real-time according to the market price; High independence: can be operated out of the power grid Higher efficiency: International leading brand components provide higher efficiency Perfect switch: it's less than 20ms from the grid Manufacturer        Solis Phases         1 Phase Power Rating          kW5 Inverter Type         Hybrid Inverter Built in DC         Yes No. of MPPT         2 Built in Communication            Optional Commodity Code              85044085 Dimensions (mm) (H x W x D)       505 x 333 x 249

Read more less

Safety and Power Independence in Every Charge Inverter includes external CT smart meter ADL200N-CT The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, active fire protection module, and an IP65-certified design. Expandable up to 15kWh, it offers over 6000 charge cycles and a 15-year warranty— a secure, scalable, and future-proof power investment for your home. The EcoFlow PowerOcean Hybrid Inverter is a single-phase grid-tied string inverter that converts the DC power generated by PV strings into AC power and enables highly efficient solar energy usage and storage to achieve your home power independence. The inverter is integrated with backup module, offering 3.6kW of output to power almost every essential appliance in case of any grid outage. Inverter Maximum PV Power: 12000w (6.0Kw Inverter) Maximum Input Voltage: 600V Mppt Voltage Range: 90V-520 Max input Current per MPPT (A): 18 (single PV input), 16 (dual PV input) Dimensions: (W x D x H)mm 679.6×182.7×280 Weight: 21.5kg Noise Emission: 40(dB) Floor Standing or Wall Mounted IP65 protection grade Warranty: 15 years P1-6KW-EU

Read more less

Higher incomes: select the electricity consumption mode in real-time according to the market price; High independence: can be operated out of the power grid Higher efficiency: International leading brand components provide higher efficiency Perfect switch: it's less than 20ms from the grid

Read more less

Higher incomes: select the electricity consumption mode in real-time according to the market price; High independence: can be operated out of the power grid Higher efficiency: International leading brand components provide higher efficiency Perfect switch: it's less than 20ms from the grid Manufacturer       Solis Phases       1 Phase Power Rating         kW6 Inverter Type         Hybrid Inverter Built in DC          Yes No. of MPPT        2 Built in Communication         Optional Commodity Code        85044085 Dimensions (mm) (H x W x D)       505 x 333 x 249

Read more less

The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 5kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  Key features: Myenergi Ecosystem - Integrates with your myenergi devices, prioritising power to your home, eddi or zappi. Ultimate Control - The libbi gives you the option to charge solely from solar or through the grid or a mixture of the 2. It also has the capability optimise grid charging around your energy tariff. Remote Access - The myenergi app allows you to access and contorl your libbi and other myenergi devices from anywhere in the world. It also allows you to monitor live import and export to from and to the grid. Modular battery storage - Each battery module can store 5kWh of energy. This is scalable up to 4 batteries, offering a total maximum capacity of 20kWh Flexible Install - The libbi works as both an AC and DC coupled battery system with solar PV and can also work as a battery inverter without any PV at all. Optional Blackout Back Up - Instant energy available to a dedicated socket or lighting circuit in the event of a power cut. AC Output Max power 5000W Max current 22A Number of phases 1 DC attributes (Inverter) Number of MPPTs 2 V range of MPPT 80 - 560V Max power 6500W Max current 15A Max voltage 580V Start up voltage 150V System Max efficiency 97.6% IP rating IP65 Built in protection AC and DC surge protection Type II, arc fault Export limitations Possible using CT or meter Weight 32kg Dimensions 540 x 590 x 240mm Communication WiFi and Ethernet Warranty (extensions) 5 years DC Attributes (Battery Input) Max charge current 100A Max discharge current 100A Max charge power 4600W Max discharge power 5000W Nominal batt voltage 48V Battery Type LiFePO4

Read more less

Part No: GIV-HY-5.0-G3-PE Storage Systems - Hybrid Inverter GivEnergy Hybrid Inverter 5.0kW Gen 3  The third generation of the GivEnergy Hybrid Inverter range PLEASE NOTE: This is an updated version, and an Earth Bonding Kit is no longer required. GIV-PE-KIT-G3 is NOT required as a separate product. It can be coupled directly with solar panels to generate usable electricity in the property as well as store any excess energy for later use in a battery. The Hybrid Inverter aims to minimise export by storing excess energy in the battery during generation hours. Additionally, it will minimise import by discharging to meet demand in the property Spec MPPT Range 120V - 550V Max. Short Circuit Current (per string) 20A Max. Input Current (per string) 15A MPPT Tracker / No. of Strings per MPPT Tracker 2/1 Features  In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 12 Year Warranty Effective of Monday, September 11th, the GivEnergy residential battery storage system will no longer offer a 5-year warranty with the option of extending it to 10 years. Instead, all residential batteries, inverters, and AIO units will now come with a standard 12-year warranty. Systems installed before the 11th of September still have 60 days to order a warranty extension. Major announcement: introducing an industry leading 12 year warranty | GivEnergy FAQ: The GivEnergy 12 year warranty | GivEnergy Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also available via your smartphone or web portal. The FoxESS inverters can be configured with the following batteries: CT Clamps and WiFi stick are included in the box. A second CT will be required if there's another generator set (i.e PV, wind or other). A meter will be required for >30m distance between inverter and incoming power connection point. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: FE-H1-6.0-G2 Weight: 23 kg Rated Power: 6,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 9,000 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,600 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Safety and Power Independence in Every Charge Inverter includes external CT smart meter ADL200N-CT The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, active fire protection module, and an IP65-certified design. Expandable up to 15kWh, it offers over 6000 charge cycles and a 15-year warranty— a secure, scalable, and future-proof power investment for your home. The EcoFlow PowerOcean Hybrid Inverter is a single-phase grid-tied string inverter that converts the DC power generated by PV strings into AC power and enables highly efficient solar energy usage and storage to achieve your home power independence. The inverter is integrated with backup module, offering 3.6kW of output to power almost every essential appliance in case of any grid outage. Inverter Maximum PV Power: 11000w (5.0Kw Inverter) Maximum Input Voltage: 600V Mppt Voltage Range: 90V-520 Max input Current per MPPT (A): 18 (single PV input), 16 (dual PV input) Dimensions: (W x D x H)mm 679.6×182.7×280 Weight: 21.5kg Noise Emission: 40(dB) Floor Standing or Wall Mounted IP65 protection grade Warranty: 15 years P1-5KW-EU

Read more less

Part No: FE-H1-3.7-G2 Storage Systems - Hybrid Inverter CT Clamps and WiFi stick are included in the box. A second CT will be required if there's another generator set (i.e PV, wind or other). A meter will be required for >30m distance between inverter and incoming power connection point. FoxESS inverters are not compatible with SolarEdge or Huawei optimizers, but with those from Tigo. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: FE-H1-3.7-G2 Weight: 22 kg Rated Power: 3,680 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 600 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,680 W Surge AC Power (1 Second): 4,400 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 95.7 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SUN-8.0-ECCO Storage Systems - Hybrid Inverter The Sunsynk 5kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.  Product Features Dual MPPT design  Compatible with most Lithium-ion batteries and Lead Acid batteries Mobile App for monitoring IP65 rated Automatic switching from Grid-Tied to Off-Grid mode Zero export function Up to 16 units with the same firmware can be paralleled Essential and Non-Essential Loads outputs Comes with the Wi-Fi logger and CT Compatible with SolarMan App for Monitoring Pylontech Compatibility Tested: US 3000C  US 2000B-Plus US 3000B Not currently tested with Pylon – LV Hub please consult with us before proceeding For installations with the US3000C and UP5000 please use the following BMS cable    INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here to gain full activation of the warranty. BEFORE INSTALLATION, please ensure that you check that the Inverter is updated to the latest firmware version.  Latest Version 3367 E41C Supplier Part No: Sunsynk-8.8-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 8,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: SUN-5.0-ECCO Storage Systems - Hybrid Inverter The Sunsynk 5kW ECCO hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. All of the power of the previous Sunsynk model in a smaller package! Product Features Dual MPPT design  Compatible with most Lithium-ion batteries and Lead Acid batteries Mobile App for monitoring IP65 rated Automatic switching from Grid-Tied to Off-Grid mode Zero export function Up to 16 units with the same firmware can be paralleled Essential and Non-Essential Loads outputs Comes with the Wi-Fi logger and CT Compatible with SolarMan App for Monitoring  Supplier Part No: Sunsynk-5.5-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 11,000 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: FE-F3600 Inverters - Main Units Rating: 3,600W Phases: 1 FOX ESS - PV Inverter - F Series - 3.6kW F3600 Our Dual-MPPT F Series range includes 3.0 - 6.0kW models. The F Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: F3600 Weight: 15.5 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 5,400 W Max AC Power (5 Minutes): 3,600 W Surge AC Power (1 Second): 0 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.8 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Safety and Power Independence in Every Charge Inverter includes external CT smart meter ADL200N-CT The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, active fire protection module, and an IP65-certified design. Expandable up to 15kWh, it offers over 6000 charge cycles and a 15-year warranty— a secure, scalable, and future-proof power investment for your home. The EcoFlow PowerOcean Hybrid Inverter is a single-phase grid-tied string inverter that converts the DC power generated by PV strings into AC power and enables highly efficient solar energy usage and storage to achieve your home power independence. The inverter is integrated with backup module, offering 3.6kW of output to power almost every essential appliance in case of any grid outage. Inverter Maximum PV Power: 9680w (3.6Kw Inverter) Maximum Input Voltage: 600V Mppt Voltage Range: 90V-520 Max input Current per MPPT (A): 18 (single PV input), 16 (dual PV input) Dimensions: (W x D x H)mm 679.6×182.7×280 Weight: 21.5kg Noise Emission (dB) Floor Standing or Wall Mounted IP65 protection grade Warranty: 15 years P1-3.68KW-EU

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 3 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 15kWh Battery Kit  Optional extra Floor Stand Optional extra top cover myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Part No: FE-KH1-8.0 Storage Systems - Hybrid Inverter The FoxESS KH8 is a stylish 8kW single phase IP65 full hybrid inverter. The Fox KH8 uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most out of your solar system. The FoxESS KH8 is easy to install, saving you valuable time on site. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.    Supplier Part No: FE-KH1-8.0 Weight: 29 kg Rated Power: 8,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 48 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SUN-3.6-ECCO Storage Systems - Hybrid Inverter The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68 resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as; Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack 5yr warranty as standard IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled  Supplier Part No: SUNsynk-3.5K-SGO1LP1 ECCO Weight: 20.5 kg Rated Power: 3,600 W Min PPT Voltage: 125 V Max PPT Voltage: 500 V DC Startup Voltage: 150 V DC Shutdown Voltage: 125 V Max Input Voltage: 500 V Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.9 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: FE-KH1-7.0 Storage Systems - Hybrid Inverter The FoxESS KH7 is a stylish 7kW single phase IP65 full hybrid inverter. The Fox KH7 uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most out of your solar system. The FoxESS KH7 is easy to install, saving you valuable time on site. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.   Supplier Part No: KH7 Weight: 29 kg Rated Power: 7,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 10,500 W Max AC Power (5 Minutes): 7,000 W Surge AC Power (1 Second): 7,700 W Max DC Current: 48 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

These cables are required for connection when installing the Polar ESS Inverter and Battery storage system.   System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE 

Read more less

Part No: FE-KH1-10.0 Storage Systems - Hybrid Inverter The FoxESS KH10 is a stylish 10kW single phase IP65 full hybrid inverter. The Fox KH10 uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most out of your solar system. The FoxESS KH10 is easy to install, saving you valuable time on site. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.  Supplier Part No: FE-KH1-10.0 Weight: 29 kg Length: 0.62 m Rated Power: 10,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 8 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 3.68kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.  Key features: Myenergi Ecosystem - Integrates with your myenergi devices, prioritising power to your home, eddi or zappi. Ultimate Control - The libbi gives you the option to charge solely from solar or through the grid or a mixture of the 2. It also has the capability optimise grid charging around your energy tariff. Remote Access - The myenergi app allows you to access and contorl your libbi and other myenergi devices from anywhere in the world. It also allows you to monitor live import and export to from and to the grid. Modular battery storage - Each battery module can store 5kWh of energy. This is scalable up to 4 batteries, offering a total maximum capacity of 20kWh Flexible Install - The libbi works as both an AC and DC coupled battery system with solar PV and can also work as a battery inverter without any PV at all. Optional Blackout Back Up - Instant energy available to a dedicated socket or lighting circuit in the event of a power cut.   AC Output Max power 3680W Max current 16A Number of phases 1 DC attributes (Inverter) Number of MPPT 2 V range of MPPT 80 - 560V Max power 4800W Max current 15A Max voltage 580V Start up voltage 150V System Max efficiency 97.6% IP rating IP65 Built in protection AC and DC surge protection Type II, arc fault Export limitations Possible using CT or meter Weight 32kg Dimensions 540 x 590 x 240mm Communication WiFi and Ethernet Warranty  5 years DC Attributes (Battery Input) Max charge current 50A Max discharge current 80A Max charge power 3000W Max discharge power 4000W Nominal batt voltage 48V Battery Type LiFePO4

Read more less

Part No: GIV-HY-3.6-G3-PE Storage Systems - Hybrid Inverter GivEnergy Hybrid Inverter 3.6kW Gen 3  The third generation of the GivEnergy Hybrid Inverter range PLEASE NOTE: This is an updated version, and an Earth Bonding Kit is no longer required. GIV-PE-KIT-G3 is NOT required as a separate product. It can be coupled directly with solar panels to generate usable electricity in the property as well as store any excess energy for later use in a battery. The Hybrid Inverter aims to minimise export by storing excess energy in the battery during generation hours. Additionally, it will minimise import by discharging to meet demand in the property Spec MPPT Range 120V - 550V Max. Short Circuit Current (per string) 20A Max. Input Current (per string) 15A MPPT Tracker / No. of Strings per MPPT Tracker 2/1 Features  In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 12 Year Warranty Effective of Monday, September 11th, the GivEnergy residential battery storage system will no longer offer a 5-year warranty with the option of extending it to 10 years. Instead, all residential batteries, inverters, and AIO units will now come with a standard 12-year warranty. Systems installed before the 11th of September still have 60 days to order a warranty extension. Major announcement: introducing an industry leading 12 year warranty | GivEnergy FAQ: The GivEnergy 12 year warranty | GivEnergy Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services

Read more less

Part No: GIV-AC3.0 Storage Systems - Charger-Inverter The GivEnergy AC Coupled Inverter works as a standalone energy storage system or alongside solar, hydro, or wind-turbine to store excess energy. Make the most of a split rate energy tariff (e.g. Economy 7) by charging the battery at off-peak times when energy rates are cheaper and discharging during the more expensive periods to reduce your overall energy bill System needs to be connected to the internet to comply with warranty requirements. Product Features Uses GivEnergy Lithium batteries that can be added to extend KWh of battery bank Installed to new builds or retrofitted to an existing solar pv system  Monitor usage through web-app interface Lightweight and compact Backup function supported Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services When connecting GivEnergy products of differing generations, different cables will be required.  For example, when connecting a Gen 1 hybrid to a Gen 2 battery, GIV-BC-LP-G will be required. When connecting a Gen 2 battery to another Gen 2 battery, GIV-BAT-CAB-G2-G2 will be required.

Read more less

Features Safety and prevention of galvanic corrosion The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms. Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or a GFCI (Ground Fault Current Interrupter) will trip in case of a short circuit or current leakage to ground. Connecting the ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see below). Bringing only the live and neutral wire on board results in an unsafe situation because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat. Galvanic corrosion occurs when two dissimilar metals in electrical contact are simultaneously exposed to an electrically conducting fluid. Seawater and, to a lesser extent, fresh water are such fluids. In general, the more active alloy of the couple corrodes preferentially while the less active (more noble) material is cathodically protected. The rate of galvanic corrosion is a function of several variables including area ratios, conductivity of the fluid, temperature, nature of the materials, etc. It is a misunderstanding that galvanic corrosion occurs only in metal and aluminium hulls. In fact it can occur on any boat as soon as a metallic part (the shaft and propeller) is in contact with water. Galvanic corrosion will quickly dissolve your sacrificial anodes, and attack the shaft, propeller and other metal parts in contact with water as soon as the boat is connected to the shore-side supply. It might therefore be tempting not to connect the ground conductor: this is however extremely dangerous because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat. The best solution to avoid galvanic corrosion and at the same time prevent any unsafe situation is to install an Isolation Transformer to connect to the shore-side supply. The Isolation Transformer eliminates any electrical continuity between shore power and the boat. The shore power is fed to the primary side of the transformer and the ship is connected to the secondary. The Isolation Transformer completely isolates the boat from the shore ground. By connecting all metal parts to the neutral output on the secondary side of the transformer, a GFCI will trip or a fuse will blow in case of a short circuit. Soft start is a standard feature of a Victron Energy isolation transformer. It will prevent the shore power fuse from blowing due to the inrush current of the transformer, which would otherwise occur. It is also recommended, for optimal safety, to connect the secondary neutral of the transformer to ground when the boat is out of the water. Brand Victron Energy Manufacturer Part Number ITR040362041 Input 115 or 230 V Output 115 or 230 V Frequency 50/60 Hz Rating 32 / 16 A Soft Start Yes Transformer Type Toroidal (low noise, low weight) Input Circuit Breaker Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 23 Warranty 5 Years

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Uses high voltage batteries FE-HV2600 IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity High round-trip efficiency of 97% BMS unit required 2 x HV2600 batteries minimum Compatible with all HV Fox battery range - so long as Master and Slave same size CT Clamp is included in the box

Read more less

Part No: GIV-5.0K-G3-9.5-G3-WG Special Offers - PV and Storage Package This part is made up of the following items: 1 x GIV-BAT-9.5-G3 GivEnergy 9.5 kWh Li-Ion Battery Gen 3   1 x GIV-HY-5.0-G3-PE GivEnergy 1PH Hybrid Inverter 5.0kW 3rd Generation - With Bonding Kit   1 x GIV-BAT-CAB-G2-G2 GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet)   1 x GIV-GM120CT-P GivEnergy Programmable Single Phase Energy Meter with CT   1 x GIV-GROMMET GivEnergy Grommet for cable   GivEnergy Gen3 - 5.0kW Hybrid with 9.5kWh Battery Presented in this package are GivEnergy’s energy storage solutions with a special discount! Included are GivEnergy's Hybrid 3.6 inverter and a 9.5kWh Gen 3 battery. But that's not all – this package also features a 50% discount on the inverter! HALF-PRICE INVERTER OFFER Our half-price inverter offer runs from October 7th until the end of 2024. Customers purchasing a low-voltage GivEnergy battery during this period will receive the low-voltage GivEnergy inverter at half price. This offer applies to the hybrid 3.6kW, 5.0kW, and AC-coupled inverter units. Terms & Conditions This offer is only valid with the purchase of a full low-voltage system comprising an applicable GivEnergy battery and inverter. Only one half price inverter can be claimed per customer (the customer being the end user). The installer can supply half price inverters to many end users. The wholesaler should apply the inverter discount to the installer at point of sale. Wholesalers will then receive their renumeration in the form of credits against future bulk orders. This is intended as a homeowner offer. As such, the installer should pass on the discount to their customer. GivEnergy reserves the right to amend these terms at any time. Price reduced from £3,568.10 on 12/11/2024

Read more less

  1 x  GIV-BAT-9.5-G3 GivEnergy 9.5 kWh Li-Ion Battery Gen 3   1 x  GIV-HY-3.6-G3 GivEnergy 1PH Hybrid Inverter 3.6kW 3rd Generation   1 x  GIV-BAT-CAB-G2-G2 GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet)   1 x  GIV-GM120CT-P GivEnergy Programmable Single Phase Energy Meter with CT   1 x  GIV-GROMMET GivEnergy Grommet for cable   1 x  GIV-PE-KIT-G3 GivEnergy PE Bonding Kit for Gen3 Hybrid Inverters     Price reduced from £3,540.84 on 06/11/2024   Weight:118.05 kgRated Power:3,600 W 

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.

Read more less

Part No: SOL-8.0-5G-DT-DC Inverters - Main Units Rating: 8,000W Phases: 1    7-8kW 5G Single Phase Inverter Please note this inverter has two MPP trackers, each with different maximum allowed DC Current! MPP Tracker A is limited to 12.5A and should only have single string connected to it, MPP tracker B can have two strings connected to it with maximum current up to 25A. Supplier Part No: SOLIS-8.0-5G-DT-DC Weight: 13.3 kg Rated Power: 8,000 W Min PPT Voltage: 90 V Max PPT Voltage: 520 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 10,400 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,000 W Max DC Current: 37.5 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Manufacturer         Solis Phases         1 Phase Power Rating         kW6 Inverter Type         String Inverter Built in DC             Yes No. of MPPT          2 Built in Communication         Optional Commodity Code           85044085 Dimensions (mm) (H x W x D)543 x 310 x 160

Read more less

IP66 > 150% DC/AC ratio String current up to 16A Supports RS485, WiFi, GPRS Supports export power control Intelligent redundant fan-cooling Natural convection, Fan-less design Wide voltage range and low startup voltage Supports aluminium wire access to reduce cost AFCI protection, proactively reduces fire risk Intelligent string monitoring, smart I-V curve scan Natural convection, Fan-less design, longer lifespan Globally recognised branded componentry for longer life Supports high power modules for lower installation costs 3/4 MPPT design, supports multiple orientation system design Night time PID recovery function, increases overall system yield (optional) Scan to register on SolisCloud, supports remote upgrade and control Supports GPRS/WiFi communication with less wiring and reduced installation costs Application      Commercial Manufacturer      Solis Phases      3 Phase Power Rating        kW25 Inverter Type        String Inverter Built in DC      Yes No. of MPPT       3 Built in Communication       Optional Commodity Code       85044086 Dimensions (mm) (H x W x D).   629 x 647 x 252

Read more less

Part No: SUN2000-LUNA-5KW-EO Storage Systems - Li-ion Battery Pack Smart String Energy By Luna This is the battery 5KWh module only  and would need to add the power module to it. Product Features Flexible due to 5KWh that can be easy scaled from 5KWh to 30KWh 100% DOD pack level energy optimization Easy to install due to 50Kg battery module Lithium Iron Phosphate cells resulting is safe and reliable battery Auto Detected by battery Compatible with single and 3 Phase inverters Battery fault on module auto isolates to keep system safe Nominal voltage of battery is 600VDC max output per module is 2500W 10 year warranty RS485 BMS communication  IP66   Supplier Part No: LUNA2000-5-E0 Weight: 55 kg Battery Type: Lithium Ion Nominal Energy: 5000 Wh Depth of discharge: 100.00 % Voltage: 600 V Continuous Discharge Rate (Normal Use): 2500 W Maximum Discharge Rate (5 Minutes): 2500 W Surge Discharge Rate (15 Seconds): 3500 W Maximum Charge Rate (5 Minutes): 2500 W Data Sheet Huawei 3-10KTL-M1 Data Sheet Huawei Luna

Read more less

Part No: GIV-5.0K-5.12-G3-WG Special Offers - PV and Storage Package This part is made up of the following items: 1 x GIV-BAT-5.1-G3 GivEnergy 5.12kWh Li-Ion Battery Gen 3   1 x GIV-HY-5.0-G3-PE GivEnergy 1PH Hybrid Inverter 5.0kW 3rd Generation - With Bonding Kit   1 x GIV-BAT-CAB-G2-G2 GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet)   1 x GIV-GM120CT-P GivEnergy Programmable Single Phase Energy Meter with CT   1 x GIV-GROMMET GivEnergy Grommet for cable   GivEnergy Gen3 - 5.0kW Hybrid with 5.12kWh Battery Presented in this package are GivEnergy’s energy storage solutions with a special discount! Included are GivEnergy's Hybrid 3.6 inverter and a 5.12kWh battery. But that's not all – this package also features a 50% discount on the inverter! HALF-PRICE INVERTER OFFER Our half-price inverter offer runs from October 7th until the end of 2024. Customers purchasing a low-voltage GivEnergy battery during this period will receive the low-voltage GivEnergy inverter at half price. This offer applies to the hybrid 3.6kW, 5.0kW, and AC-coupled inverter units. Terms & Conditions This offer is only valid with the purchase of a full low-voltage system comprising an applicable GivEnergy battery and inverter. Only one half price inverter can be claimed per customer (the customer being the end user). The installer can supply half price inverters to many end users. The wholesaler should apply the inverter discount to the installer at point of sale. Wholesalers will then receive their renumeration in the form of credits against future bulk orders. This is intended as a homeowner offer. As such, the installer should pass on the discount to their customer. GivEnergy reserves the right to amend these terms at any time. Weight:80.8 kgRated Power:5,000 W

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack It has 100% DoD, with 5.12kW max discharge power, a long-life span with a standard 5-year product warranty. Additional features:  Up to 16 units with the same firmware can be paralleled  IP rating 40  Self-monitoring function to detect abnormalities  Excellent thermal stability  Brackets not included; use these - SUN-WALL-BR Please note: These batteries contain CATL cells and are not intercompatible    Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

Read more less

Safety and Power Independence in Every Charge This Product is The Ecoflow PowerOcean DC Fit Converter The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, active fire protection module, and an IP65-certified design. Expandable up to 15kWh, it offers over 6000 charge cycles and a 15-year warranty— a secure, scalable, and future-proof power investment for your home. The EcoFlow 5kW DC Converter is a crucial part of the PowerOcean DC Fit Retrofit Battery Storage solution. This unique PV-coupled retrofit battery solution is extremely easy to set up and smoothly integrates into an existing solar system on the PV side. The system eliminates the need to add a new storage inverter or replace an existing solar inverter. TECHNICAL SPECIFICATION Max. input charging power: 5kW (2.5kW per string) Max. input charging current: 12A per string Max. input voltage (absolute maximum): 1000V d.c. Operating voltage range: 150-800V d.c. Supported solar inverter type: Single phase / Three phase Bypass power: 15kW per string Max. output current: 20A per string Max. output voltage: 1000V d.c. Max. output discharging power: 5kW (2.5kW per string) IP rating: IP65 Flow meter included.

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer          Solis Phases      1 Phase Power Rating          kW1 Inverter Type        String Inverter Built in DC           Yes No. of MPPT         1 Built in Communication          Optional Commodity Code            85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.  

Read more less

Features Safety and prevention of galvanic corrosion The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms. Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or a GFCI (Ground Fault Current Interrupter) will trip in case of a short circuit or current leakage to ground. Connecting the ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see below). Bringing only the live and neutral wire on board results in an unsafe situation because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat. Galvanic corrosion occurs when two dissimilar metals in electrical contact are simultaneously exposed to an electrically conducting fluid. Seawater and, to a lesser extent, fresh water are such fluids. In general, the more active alloy of the couple corrodes preferentially while the less active (more noble) material is cathodically protected. The rate of galvanic corrosion is a function of several variables including area ratios, conductivity of the fluid, temperature, nature of the materials, etc. It is a misunderstanding that galvanic corrosion occurs only in metal and aluminium hulls. In fact it can occur on any boat as soon as a metallic part (the shaft and propeller) is in contact with water. Galvanic corrosion will quickly dissolve your sacrificial anodes, and attack the shaft, propeller and other metal parts in contact with water as soon as the boat is connected to the shore-side supply. It might therefore be tempting not to connect the ground conductor: this is however extremely dangerous because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat. The best solution to avoid galvanic corrosion and at the same time prevent any unsafe situation is to install an Isolation Transformer to connect to the shore-side supply. The Isolation Transformer eliminates any electrical continuity between shore power and the boat. The shore power is fed to the primary side of the transformer and the ship is connected to the secondary. The Isolation Transformer completely isolates the boat from the shore ground. By connecting all metal parts to the neutral output on the secondary side of the transformer, a GFCI will trip or a fuse will blow in case of a short circuit. Soft start is a standard feature of a Victron Energy isolation transformer. It will prevent the shore power fuse from blowing due to the inrush current of the transformer, which would otherwise occur. It is also recommended, for optimal safety, to connect the secondary neutral of the transformer to ground when the boat is out of the water. Brand Victron Energy Manufacturer Part Number ITR000702001 Input 230 V Output 230 V Frequency 50/60 Hz Rating 32 A Soft Start Yes Transformer Type Toroidal (low noise, low weight) Input Circuit Breaker Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 28 Warranty 5 Years

Read more less

The Pocket LAN V2.0 Dongle enables you to connect to your network via an ethernet cable, to connect to the SolaX cloud monitoring platform, allowing for a much more stable connection with less interference. This can prove a suitable solution for situations where WiFi can be difficult to connect to. Compatible with: X1-Smart X1-AC X1-FIT X3-FIT Key Features: Quick installation with 'Plug & Play' function IP65 protection rating Stable data transmission and good reliability Eco-green and modern design

Read more less

Harness the power of the sun day and night with FoxESS' groundbreaking line of hybrid inverters. Easy installation - Flexible configuration, Plug & Play, built-in fuse protection. High Voltage - Includes high-voltage batteries for maximum round-trip efficiency. IP65 Rated - Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring - Monitor remotely via app or web portal. Easily expand your system by adding extra batteries. There are three battery series you can choose from, which enables a storage capacity of up to 86.40 kWh. A max. of 10 storage inverters can be connected in parallel which allows you to enlarge the system scale based on different installation requirements. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard.   Supplier Part No: FE-H3-PRO-20.0 Weight: 52.5 kg Rated Power: 20,000 W Min PPT Voltage: 160 V Max PPT Voltage: 1,000 V DC Startup Voltage: 160 V DC Shutdown Voltage: 1,000 V Max Input Voltage: 1,000 V Max DC Power: 30,000 W Max AC Power (5 Minutes): 20,000 W Surge AC Power (1 Second): 22,000 W Max DC Current: 96 A Max DC Inputs: 6 Has DC Fuses: 1 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.4 % Transformer: N/A MPPT Quantity : 6 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Details The GivEnergy 11kW Hybrid 3 Phase Inverter is a powerful and versatile unit that combines both a battery inverter and a solar inverter in one. This allows for easy and efficient use of both solar panels and energy storage to generate and store electricity for later use. The inverter is AC and DC coupled, making it incredibly flexible and easy to install. It also features on/off grid phase balancing, which ensures that power is distributed evenly between the grid and the battery. With a discharge rate of up to 11kW, it can easily meet the energy demands of any property. One of the key benefits of the GivEnergy Hybrid Inverter is its increased efficiency. It can deliver higher discharge rates, which means that it is able to store and distribute more energy than other similar inverters on the market. This makes it an ideal choice for anyone looking to maximise their energy savings and reduce their carbon footprint. The in-built WiFi network connection allows for easy monitoring and control of the system, so you can always keep track of your energy usage and make adjustments as needed. The unit is also compatible with the GivEnergy HV 3.4kwh battery range, making it a seamless addition to any existing energy storage setup. With a weight of 35kg and a 5-year warranty, the GivEnergy 11kW Hybrid 3 Phase Inverter is a reliable and high-performance choice for any property owner looking to harness the power of solar energy and energy storage. Contact us for lead times. Product Features High discharge rate - up to 11kW Low tariff rates - charge from the grid at off-peak times Peace-of-mind - 5 year full manufacturer's warranty Three phase connection Compact size, big output - weights only 35kg and measures 658 x 214 x 480mm Works with the Givenergy HV 3.4kwh battery range

Read more less

Part No: EN-IQ8HC-72-M-INT Inverters - Micro Inverter Units Rating: 384W Phases: 1 Supplier Code: IQ8HC-72-M-INT Phases: 1 oder 3 (depending on wiring) MPP Tracker: 1 Inputs per Tracker: 1 Rated AC power: 384 VA MPPT Voltage Range: 29.5 - 45 V Warranty: 25 Years   Technical Specification   Input current: 14 A Short-circuit current: 25 A Connectivity: With the help of the Envoy WLAN/Ethernet and app-enabled   Supplier Part No: IQ8HC-72-M-INT Weight: 1.1 kg Rated Power: 384 W Min PPT Voltage: 18 V Max PPT Voltage: 60 V DC Startup Voltage: 22 V DC Shutdown Voltage: 18 V Max Input Voltage: 60 V Max DC Power: 560 W Max AC Power (5 Minutes): 366 W Surge AC Power (1 Second): 366 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity: 1 Has Integrated DC Switch: No Warranty: 25 years

Read more less