High Quality Products All In One Place
Part No: GEN-SLATE Mounting - Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims 3 x Hallhooks 1 x Hookpull 3 x Compensation hooks Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know. Supplier Part No: SKI001 Weight: 0.34 kg
£7.19 Exc. VAT
£8.63 Inc. VAT
Part No: GEN-SPEEDFLASH Mounting - Roof Flashings For use on all slate roofs with 3-inch head-lap 1 x SpeedFlash® Base and Cap 2 x Shims (packings) 1 x Foam Insert 1 x Spring support Unlike the SolarFlash®, you do not need to remove any slates. This significantly reduces installation time and the requirement for roofing experience. The SpeedFlash concept retains all the benefits of the SolarFlash®; i.e. no requirement for drilling, avoidance of load bearing and preventing water ingress, thereby maintaining the integrity of the roof. SpeedFlash Demonstration Video Supplier Part No: SPF005 Weight: 0.4 kg
£6.95 Exc. VAT
£8.34 Inc. VAT
Part No: GEN-INTERFLASH Mounting - Roof Flashings InterFlash™ Kit 1 x plastic InterFlash™ to sit under the Renusol RH Flat bracket. Supplier Part No: InterFlash Weight: 0.32 kg
£2.65 Exc. VAT
£3.18 Inc. VAT
Part No: GEN-SLATE-NEW Mounting - Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. Supplier Part No: SFS001 Weight: 0.24 kg
£3.30 Exc. VAT
£3.96 Inc. VAT
Part No: GEN-FT-TILE Mounting - Roof Flashings SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Small SolarFlash (H 235mm by W 251mm) 1 x Weather stop foam 2 x Shims Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible. Non compatible components are: SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005. For any specific clarification, please let us know. Supplier Part No: SFS003 Weight: 0.16 kg
£3.10 Exc. VAT
£3.72 Inc. VAT
Part No: GEN-SPEEDFLASH-PACK Mounting - Roof Flashings This part is made up of the following items: 40 x GEN-SPEEDFLASH Genius Roof - Speed Flash 2 x GEN-SPEEDFLASHSHIELD Genius Roof - Speed Flash Shield For use on all slate roofs with 3-inch head-lap 1 x SpeedFlash® Base and Cap 2 x Shims (packings) 1 x Foam Insert 1 x Spring support Unlike the SolarFlash®, you do not need to remove any slates. This significantly reduces installation time and the requirement for roofing experience. The SpeedFlash concept retains all the benefits of the SolarFlash®; i.e. no requirement for drilling, avoidance of load bearing and preventing water ingress, thereby maintaining the integrity of the roof. SpeedFlash® Shield is a tool that installers will need during installation to protect the lower course of slates. A SpeedFlash® Shield should last at least 40 SpeedFlash® installs, this will be determined by the user. The shields purpose is to protect the lower course of slates. Take care to avoid contact with angle grinder to prolong shield life
£292.35 Exc. VAT
£350.82 Inc. VAT
Part No: GEN-P-TILE Mounting - Roof Flashings The FlexiFlash is the same size as the ‘small’ SolarFlash, made from a flexible material which allows it to mould around the curves on a profile tile. The aluminium support has been included to support the flexible back of the FlexiFlash and must be used. There is a foam included in every kit which is required to seal the hood. The foam was designed with snow in mind to stop wind taking light snow into the roof. The length of the ‘FlexiFlash’ is based on tiles being single lap (up to 100mm head lap). FlexiFlash Width - 250mm Length - 235mm Hood Wide - 50mm Length - 140mm Depth - 40mm Each kit contains: 1 x FlexiFlash 2 x Shims (packings) 1 x Foam Insert 1 x Metal Support 2 x Nails
£4.15 Exc. VAT
£4.98 Inc. VAT
Part No: GEN-SLATE-HOOKS Mounting - Roof Flashings The Hallhook was invented by a slater and tiler with 45 years of trade under his belt who couldn't stand to see a slate tiled roof covered with unsightly lead or copper straps. He tried all other available slate repairs such as straps, blobs of silicone, plastic proucts that are not only unsightly but time-consuming to install, etc. and then went on to develop the Hallhook. When to use the Hallhook™ For general repair After solar panel bracket mounting After roof light/window installation After installing slate vents This is a pack of 10 pcs. Supplier Part No:HHK001 Items in this pack:10 Weight:0.14 kg
£7.62 Exc. VAT
£9.14 Inc. VAT
This part is made up of the following items: 1 x GEN-SLATE Genius Roof - Slate Refit Kit 1 x REN-420181 Roof hook UK Plain tiles/slates (without wood screw) 1 x REN-420352 UK M8 Bracket 90° Renusol plain roof anchor for vertical mounting rails with Genius Roofing slate refit kit. This part contains: - 1 x REN-420181 - 1 x REN-420352 - 1 x GEN-SLATE Gen-Slate parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims 3 x Hallhooks 1 x Hookpull 3 x Compensation hooks
£17.99 Exc. VAT
£21.59 Inc. VAT
This part is made up of the following items: 1 x GEN-SLATE Genius Roof - Slate Refit Kit 1 x REN-420181 Roof hook UK Plain tiles/slates (without wood screw) Renusol plain roof anchor with Genius Roofing slate refit kit. This part contains: - 1 x REN-420181 - 1 x GEN-SLATE Gen-Slate parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims 3 x Hallhooks 1 x Hookpull 3 x Compensation hooks
£14.38 Exc. VAT
£17.26 Inc. VAT
This part is made up of the following items: 1 x REN-420181 Roof hook UK Plain tiles/slates (without wood screw) 1 x GEN-SLATE-NEW Genius Roof - Slate Kit for New Build Renusol plain roof anchor with Genius Roofing slate refit kit. This part contains: - 1 x REN-420181 - 1 x GEN-SLATE-NEW Gen-Slate-New Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims
£10.25 Exc. VAT
£12.30 Inc. VAT
Genius Roof Solutions specialises in providing roofers and solar installers with appropriate and innovative tools to do the job efficiently and safely. Combining their extensive experience with creativity and inspiration, they develop roof flashing and fixings that get the job done.
