Battery Storage

Part No: PYLON-US2000C Storage Systems - Li-ion Battery Pack          The newest 2.4kWh battery from Pylontech now boasts 95% DoD and a 10 year warranty. The batteries are modular so banks can be built up in units of 2.4kWh and they are simply daisy chained together. Key features 95% Depth of discharge (80% recommended when paired with a Sofar ME3000) Up to 16 batteries in a single stack, allowing a total capacity of 38.4kWh without additional hardware. >6000 Life Cycles The Pylontech US2000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle.  The Pylontech US2000C has an incredible DoD of 95%  Supplier Part No:PYLON-US2000C Weight:24 kg Battery Type:Lithium Ion Nominal Energy:2400 Wh Depth of discharge:95.00 % Voltage:48 V Continuous Discharge Rate (Normal Use):1200 W Maximum Discharge Rate (5 Minutes):2400 W Surge Discharge Rate (15 Seconds):4320 W Maximum Charge Rate (5 Minutes):2400 W   Data Sheet US2000C, US3000C and US5000

Read more less

Part No: BRACK-US3000 Storage Systems - Accessory   A set of battery brackets which allows vertical stacking of the Pylon battery unit. 1 set required per additional battery added. Supplier Part No: BW0PLUSUS3KAZJ01 Weight: 2.7 kg

Read more less

Cable Pack For The Pylon US2000/3000 Each battery includes connection cables, these cables should be used for connection to the charger. One cable pack per system to a max of 5 2 x 2m long power cables 1 x 3.5m RJ45 Communication cable (Not for CAN communication)  

Read more less

A new battery in the US series from Pylontech. The US5000 is a 48V battery with incredible features to provide a competitive edge in the market.  Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 5-year warranty extendable Long cycle life and superior performance Compatible with tier 1 inverter brands Supplier Part No: US5000 Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W Data Sheet US2000C, US3000C and US5000 Click Here For Spec Sheet  

Read more less

Part No: BRACK-US5000 Storage Systems - Accessory   A set of battery brackets which allows vertical stacking of the Pylon battery unit. 1 set required per additional battery added Supplier Part No: BW0PLUSUS5KBZJ01 Weight: 2.37 kg  

Read more less

HV2600-V2 battery for use with Fox HV Inverter-Charger range. This battery is a high voltage battery connected in series. A minimum of 2 and maximum of 4 is allowed for the AIO and a minimum of 2 and maximum of 7 is acceptable of the Fox Charger range. The batteries include their own cables. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information.   UK & EU Only - These batteries no longer include mounting brackets and these must be purchased separately UK & EU Only - FE-HV-BMS-V2 is compatible with both current and new HV2600 (FE-HV2600 & FE-HV2600-V2) UK & EU Only - FE-HV2600-V2 is NOT compatible with current BMS and AIO Inverters part numbers: FE-HV-BMS, FE-AIO-H1-3.7-E, FE-AIO-H1-5.0-E, FE-AIO-H3-6.0-E, FE-AIO-H3-8.0-E, FE-AIO-H3-10.0-E This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a result of incorrectly installed systems.   CLICK HERE FOR SPEC SHEET   Supplier Part No: H2600-V2 (HV 2.6kWh) Battery Weight: 30 kg Battery Type: Lithium Ion Nominal Energy: 2560 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 2560 W Maximum Discharge Rate (5 Minutes): 3000 W Surge Discharge Rate (15 Seconds): 3600 W Maximum Charge Rate (5 Minutes): 2560 W  

Read more less

Pylon US3000C LiFePo4 Battery 3.5kWh for Solar Part No: PYLON-US3000C Storage Systems - Li-ion Battery Pack The US3000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abormal temperature, current, voltage, SoC and SoH. The Pylontech US3000C has an incredible DoD of 95%.  You can now register the Pylon US3000C for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the 'sign up battery' page. Supplier Part No: PYLON-US3000C Weight: 32 kg Battery Type: Lithium Ion Nominal Energy: 3552 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 1776 W Maximum Discharge Rate (5 Minutes): 3552 W Surge Discharge Rate (15 Seconds): 4320 W Maximum Charge Rate (5 Minutes): 1776 W Data Sheet US2000C, US3000C and US5000    

Read more less

Part No: FE-HV2600-EXT-1M Storage Systems - Accessory This as a longer version of the Fox ESS HV2600 battery interlink cables. This is recommended when installing HV2600 batteries side by side using a wall mounted bracket and a longer cable is required to bridge the gap. Supplier Part No: 1M 2600 DC cable Weight: 1 kg  

Read more less

Part No: FE-HV-ECS-2900 Storage Systems - Li-ion Battery Pack Fox Energy Cube - High Voltage Battery (Slave) ECS2900  Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: Energy Cube CS2900 Weight: 32.4 kg Battery Type: Lithium Ion Nominal Energy: 2880 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 1440 W Maximum Discharge Rate (5 Minutes): 2880 W Surge Discharge Rate (15 Seconds): 3000 W Maximum Charge Rate (5 Minutes): 2880 W  

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack   Brackets not included Introducing Sunsynk's energy storage module well designed for residential UPS and off-grid applications. Cells produced by CATL, a global leader in lithium-ion battery developement and manufacturing. Product Features Long life span with an expected life of 10-years 5-year product warranty(non extendable) 10-year performance warranty Parallel capability of 16 units 100% Depth of Discharge 5.12kW maximum discharge power (C0.5 rated)  Batteries provide excellent thermal stability and storage and also has a self-monitoring function to detect abnormalities.  IP rating 40   INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here.  Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

Read more less

6 UNITS IN STOCK Part No: HV11550-58-SLAVE-V2 Storage Systems - Li-ion Battery Pack Solax Triple Power LFP Extension Battery (Slave)  HV11550-58   The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power LFP battery is available as a Master Battery 5.8kWh and a Slave Battery 5.8kWh. Each Master can be installed with up 3 Slave batteries in series (charger dependent) for up to 23.2kWh storage capacity.    Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total).   Additional features: Scalable to 23.2kWh Up to 4kW charge/discharge High Voltage means thinner cables are required. Compact Design 90% Depth of discharge 6000 life cycles Easy installation – plug and play with all cables supplied   Triple Power LFP 5.8kWh Slave batteries can only be matched with LFP 5.8kWh Master batteries.  They are NOT compatible with Generation 1 or 2 BMS or Batteries!   Please note this is a HV11550-58 Extension (Slave) Battery only, it requires HV-T-BAT-H-58 Main Battery(Master) to work. Additionally; T58 Master V2 + T58 Slave V1 / T58 Slave V2 ==> works normal T58 Master V1 + T58 Slave V2 ==> works but considering the better performance and compatibility, suggest to use slave V1 if there is existing V1 Master installed. Supplier Part No: Triple Power 5.8kWh Slave V2 Weight: 72.2 kg Battery Type: Lithium Ion Nominal Energy: 5800 Wh Depth of discharge: 100.00 % Voltage: 115 V Continuous Discharge Rate (Normal Use): 2875 W Maximum Discharge Rate (5 Minutes): 4000 W Surge Discharge Rate (15 Seconds): 4000 W Maximum Charge Rate (5 Minutes): 4000 W Data Sheet Solax Battery Blue 5.8kWh EN

Read more less

Utilising lithium iron phosphate, GivEnergy batteries are extremely safe and can be installed in a wide range of locations. Their market-leading battery warranty means you can use your battery as much as you want for 12 years and still be covered. Features:  Plug & Play functionality Fully Recyclable at end of life Remote Firmware upgrades IP65 Rated 12 Year warranty Technical: Dual BMS system allowing greater control and functionality Scalable Battery Packs - Up to 5 per inverter in 2019 0.5C-1C charge and discharge rate Retrofit compatible 157Wh per Kg +/- 5% Depth of Discharge 100% Effective of Monday, September 11th, the GivEnergy residential battery storage system will no longer offer a 5-year warranty with the option of extending it to 10 years. Instead, all residential batteries, inverters, and AIO units will now come with a standard 12-year warranty. Systems installed before the 11th of September still have 60 days to order a warranty extension. Major announcement: introducing an industry leading 12 year warranty | GivEnergy FAQ: The GivEnergy 12 year warranty | GivEnergy NOTICE: When connecting Gen 1 and Gen 2 GivEnergy products together, for example a Gen 1 hybrid inverter with a Gen 2 9.5 battery, you must use a G1 to G2 cable. This would also be required if you connect a Gen 2 9.5 battery to a Gen 1 8.2 battery.   If you are connecting Gen 2 products together, such as a Gen 2 hybrid and a Gen 2 9.5 battery, you must use a G2 to G2 cable. Please contact your account manager or technical contact for more details. Supplier Part No: GIV-BAT9.5 Weight: 110 kg Battery Type: Lithium Ion Nominal Energy: 9500 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 4096 W Maximum Discharge Rate (5 Minutes): 4096 W Surge Discharge Rate (15 Seconds): 4096 W Maximum Charge Rate (5 Minutes): 4096 W

Read more less

Part No: KETO-00 Storage Systems - Battery Fuse Holder Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. Keto size 00 Maximum DC current = 160A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 Wall mountable. The Keto-00 needs two fuses at the appropriate rating to be added. Size these based on the maximum battery current with a safety factor applied.  Supplier Code: T500113002 Supplier Part No: T500113002 Weight: 0.73 kg Data Sheet NH Fuse Link (English, German)  

Read more less

The capacities of the combinable batteries range from 5.1-10.2 kWh (HVS). Like its predecessors, the Battery-Box Premium HVS is based on lithium iron phosphate, one of the most reliable storage technologies. The battery has a modular structure and can be expanded in steps of 2.6 kWh (HVS). This means that there is nothing to prevent the storage being expanded at a later date. The floor mounting means that the installation and commissioning process can again be carried out quickly and easily. Click Here For Spec Sheet

Read more less

Part No: BRACK-US2000 Storage Systems - Accessory A set of battery brackets which allows vertical stacking of the Pylon battery unit. 1 set required per additional battery added. Supplier Part No: WJ0ZU2000B01 Weight: 2.36 kg  

Read more less

Details Introducing the Sunsynk 5.32kWh Battery - a top-grade 5.32kWh lithium-ion phosphate battery flexible and reliable energy storage solution for your home or business. With a 100% depth of discharge (recommended 80%), you can make the most of your usable energy. Plus, the battery is scalable from 5.32 to 85.12 kWh, making it a flexible investment for your changing energy needs. Made with premium lithium ion phosphate (LFP) and engineered to the highest standards, this Sunsynk battery boasts a long lifespan of up to 6000 cycles, ensuring a safe and reliable source of power for years to come. Installation is a breeze, the BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward with the option to mount it on the floor or walls it weighs just 46.5kg. The Sunsynk 5.32kWh battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. It is also compatible with major PCS brands, ensuring perfect compatibility with your existing solar energy system. And with one button activation, you can easily turn it on and off with automatic ID assignment. Don't let power outages disrupt your daily life - invest in the Sunsynk battery today. Features: Usable Energy - 100% depth of discharge (recommended 80%) Flexible Investment - Scalable from 5.32 to 85.12 kWh Safe & Reliable - Premium lithium ion phosphate (LFP) 6000 cycles Easy Installation - Floor stand or wall mounted Perfect Compatibility - Compatible with major PCS brand One Button Activation - ON / OFF automatic ID assignment

Read more less

Details The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation.The dedicated Sunsynk Connect Platform enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system.From the pre-set factory settings to the in-built connection ports, the Sunsynk Lifelynk X 3.6kW SUN-LIFE3.6X-HYB Hybrid Inverter has been designed with convenience and hassle-free installation in mind. Features: Small and Mighty - An ideal solution for smaller properties, social housing and local government projects Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit EPS Function - Includes option for 3.6kw Output for Essential Loads Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket Plug and Play - Get up and running quickly Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind Maximum Power Output - 3600w Dimensions - 700.6 x 534.6 x 182.2mm Weight - 57.4kg This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too.  

Read more less

Part No: MC4-CRIMP-TOOL Tools - Accessories Crimping pliers for private use PV-CZM-BS   Suitable for the assembly of products approved by TÜV in small amounts. Simple crimping tool without locator and without spare parts (not possible to replace the inserts) Crimp cycles : 30’000 cycles guaranteed   Complete tool for the assembly of the original MC4.     part code 32.6025 PV-CZM-BS   PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY.   Important PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY. Supplier Part No: 32.6025 Weight: 0.59 kg

Read more less

Part No: MC4-SPAN-MET Tools - Accessories Assembly and unlocking tool, incl. belt pouch (consisting of 2 open-end spanners), metalMC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6058 Weight: 0.3 kg

Read more less

Part No: MC4-SPAN Tools - Accessories Open-end spanner and unlocking tool MC4   To tighten and unscrew the cable gland and to open the locking device of the connection.ords: MC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6024 Weight: 0.05 kg

Read more less

Part No: CS-T4-DT Tools - Accessories    Disconnect tool for the Tlian T4 connectors on Canadian Solar modules. This also works on the MC4 and H4 connectors/cables. 1 x T4-DT  Picture shows both sides of the disconnecting tool.   Supplier Part No: CS-T4-DT Weight: 0.02 kg

Read more less

Part No: MC4-CAP-MALE Cables - Accessories Snap-in lock   Supplier Part No: 32.0716 Weight: 0.019 kg

Read more less

Part No: MC4-CAP-FEMALE Cables - Accessories Snap-in lock Supplier Part No: 32.0717 Weight: 0.005 kg

Read more less

Part No: MC4-15-MAL Cables - Connectors Supplier Code:32.0015P0001 Male cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm²   Rated current: 39 A (for 4 and 6mm2 cable)   Please use correct MC4 approved tools to crimp these connectors on to bare cables.    Supplier Part No: 32.0015P0001-UR Weight: 0.01 kg

Read more less

Part No: JK03M Cables - Connectors PV Cable Connector: PV-JK03M/xy series   High security, only unbolt by tools. Low contact resistance. Retaining structure of nut to keep torsion valid. Resistance to ozone and ultraviolet radiation. Degree of Protection : IP68. Certification of TÜV, UL, and JET. Compatible with the first-generation product of JinKO.   Supplier Part No: JK03M Items in this pack: 2 Weight: 0.14 kg

Read more less

Part No: JA-QC4-10-35-1500V Cables - Connectors   Rated 1500V DC QC4.10-35 connector pair – Male and Female Required to comply with ‘IEC 62548:2016 - Photovoltaic (PV) arrays - Design Requirements’ regarding DC connectors inter-compatibility when using JA Solar modules supplied with QC4 connectors.   Supplier Part No: QC4.10-35 Connector Weight: 0.03 kg

Read more less

Part No: HQC4-PAIR Cables - Connectors HQC4 Connector pair (1x Male, 1x Female) for Q-Cells Supplier Part No: HQC4-PAIR Weight: 0.042 kg

Read more less

Part No: MC4-EVO2A-0316-FEM Cables - Connectors The MC4-Evo2A is the latest addition to the Stäubli Electrical Connector PV portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4 Evo 2 Female cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL. THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.       DI comes with Maroon seal. Supplier Code: 32.0316P0001 Rated current: 45A 4mm2 and 53A 6mm2 cables Important The MC4-EVO2A-0316-FEM connectors are compatible with the MC4-EVO2-MAL1 connectors. Supplier Part No: 32.0316P0001 Weight: 0.013 kg

Read more less

Part No: MC4-CONN14-2-PACK Cables - Connectors A pack of 2x Male and 2x Female cable couplers. Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm²   Rated current: 39 A (for 4 and 6mm2 cable) Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min)  Cross section: 4 - 6 mm² Outer diameter cable (dA): 5,0 - 6,0mm  Please use correct MC4 approved tools to crimp these connectors on to bare cables.  Supplier code: 32.0014P0001-UR and 32.0015P0001-UR Keywords: MC4CONN2PACK, Multi Contact, PV Cable   Weight: 0.04 kg Rated Power: 250 W

Read more less

Part No: MC4-EVO2-CONN86-2-PACK Cables - Connectors The MC4-Evo2 is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus. 1xMale, 1xFemale. Approved for 1500 V DC (IEC) Rated current: 45A 4mm2 and 53A 6mm2 cables MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) Supplier code: 32.0086P0001-UR and 32.0087P0001-UR    - for use with 4mm2 & 6mm2 with an outside diameter of 4.7mm-6.4mm (including insulating part)   DII comes with Grey seal.   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL.  THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR. Weight: 0.052 kg

Read more less

Part No: MC4-2M-2 Cables - Pre Terminated Cables MC4 10M2, 1xMale, 1xFemale each cable, MC4.PV Cable, Pre Terminated Cable. Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock. A mix of 4 and 6mm will be provided.   Supplier Part No: 96274 Weight: 0.27 kg Length: 2 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-10M-1 Cables - Pre Terminated Cables Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Supplier Part No: 32.00226-10M21 Weight: 0.58 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-SPL-2 Cables - Connectors MC-4 contact doubler - Pack of 2 Pairs MC-4 splitter kit, consisting of: 2 x MC-T splitter sockets (2 x female connectors, 1 x male connector) 2 x MC-T4 splitter plugs (2 x male connectors, 1 x female connector) For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SPL2, Stäubli, PV Cable   Supplier Part No: 95036 Weight: 0.25 kg

Read more less

Part No: MC4-10M-2PACK Cables - Pre Terminated Cables 2x10m cable, 1xMale, 1xFemale each MC4 Pre-terminated. Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Weight: 1.16 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: FE-HV-EC-6-4.1-24.6 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 5 x  Fox ECS 4.03kWh HV Battery (Slave)   1 x  Fox ECS 4.03kWh HV Battery (Master)   Fox ECS 4.1kWh - Stack of 6 (24.18kWh Useable Storage) Incl. Master ECM4100  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM4100 battery modules to be added post installation. Weight: 218.3kg Dimensions (Width, Hight, Depth): 570mm x 830mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 229.8 kg Battery Type: Lithium Ion Nominal Energy: 24180 Wh Depth of discharge: 90.00 % Voltage: 345 V Continuous Discharge Rate (Normal Use): 17280 W Maximum Discharge Rate (5 Minutes): 17280 W Surge Discharge Rate (15 Seconds): 22464 W Maximum Charge Rate (5 Minutes): 17280 W

Read more less

Part No: FE-HV-EC-5-4.1-20.5 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 4 x  Fox ECS 4.03kWh HV Battery (Slave)   1 x  Fox ECS 4.03kWh HV Battery (Master)   Fox ECS 4.1kWh - Stack of 5 (20.15kWh Useable Storage) Incl. Master ECM4100  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM4100 battery modules to be added post installation. Weight: 182.3kg Dimensions (Width, Hight, Depth): 570mm x 710mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 191.5 kg Battery Type: Lithium Ion Nominal Energy: 20150 Wh Depth of discharge: 90.00 % Voltage: 288 V Continuous Discharge Rate (Normal Use): 14400 W Maximum Discharge Rate (5 Minutes): 14400 W Surge Discharge Rate (15 Seconds): 18720 W Maximum Charge Rate (5 Minutes): 14400 W

Read more less

Part No: FE-HV-EC-7-2.9-20.3 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 6 x  Fox ECS 2.88kWh HV Battery (Slave)   1 x  Fox ECS 2.88kWh HV Battery (Master)   Fox ECS 2.9kWh - Full Stack of 7 (20.16kWh Useable Storage) incl. Master ECM2900 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM2900 battery modules to be added post installation. Weight: 229.1kg Dimensions (Width, Hight, Depth): 570mm x 950mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 229.1 kg Battery Type: Lithium Ion Nominal Energy: 20160 Wh Depth of discharge: 90.00 % Voltage: 403 V Continuous Discharge Rate (Normal Use): 20160 W Maximum Discharge Rate (5 Minutes): 20160 W Surge Discharge Rate (15 Seconds): 26208 W Maximum Charge Rate (5 Minutes): 20160 W

Read more less

Part No: FE-HV-EC-6-2.9-17.4 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 5 x  Fox ECS 2.88kWh HV Battery (Slave)   1 x  Fox ECS 2.88kWh HV Battery (Master)   Fox ECS 2.9kWh - Stack of 6 (17.28kWh Useable Storage) Incl. Master ECM2900 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM2900 battery modules to be added post installation. Weight: 196.7kg Dimensions (Width, Hight, Depth): 570mm x 830mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 196.7 kg Battery Type: Lithium Ion Nominal Energy: 17280 Wh Depth of discharge: 90.00 % Voltage: 345 V Continuous Discharge Rate (Normal Use): 17280 W Maximum Discharge Rate (5 Minutes): 17280 W Surge Discharge Rate (15 Seconds): 22464 W Maximum Charge Rate (5 Minutes): 17280 W

Read more less

Part No: FE-HV-EC-5-2.9-14.5 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 4 x  Fox ECS 2.88kWh HV Battery (Slave)   1 x  Fox ECS 2.88kWh HV Battery (Master)   Fox ECS 2.9kWh - Stack of 5 (14.4kWh Useable Storage) incl. Master ECM2900 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM2900 battery modules to be added post installation. Weight: 164.3kg Dimensions (Width, Hight, Depth): 570mm x 710mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 164.3 kg Battery Type: Lithium Ion Nominal Energy: 14400 Wh Depth of discharge: 90.00 % Voltage: 288 V Continuous Discharge Rate (Normal Use): 14400 W Maximum Discharge Rate (5 Minutes): 14400 W Surge Discharge Rate (15 Seconds): 18720 W Maximum Charge Rate (5 Minutes): 14400 W

Read more less

Part No: FE-HV-EC-4-2.9-11.6 Storage Systems - Li-ion Battery Pack This part is made up of the following items: 3 x  Fox ECS 2.88kWh HV Battery (Slave)   1 x  Fox ECS 2.88kWh HV Battery (Master)   Fox ECS 2.9kWh - Stack of 4 (11.52kWh) Incl. Master ECM2900 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM2900 battery modules to be added post installation. Weight: 131.9kg Dimensions (Width, Hight, Depth): 570mm x 590mm x 380mm  Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 131.9 kg Battery Type: Lithium Ion Nominal Energy: 11520 Wh Depth of discharge: 90.00 % Voltage: 230 V Continuous Discharge Rate (Normal Use): 11520 W Maximum Discharge Rate (5 Minutes): 11520 W Surge Discharge Rate (15 Seconds): 14976 W Maximum Charge Rate (5 Minutes): 11520 W

Read more less

This part is a special offer made up of the following items: Part   1 x  GivEnergy All In One - 13.5 kW - NO GATEWAY   1 x  GivEnergy - All In One - Gateway ONLY The GivEnergy All In One AC coupled system has many advantages. With 7.2kW peak power, the charge and discharge rate of these batteries helps better take advantage of agile tariffs.  Alongside this, the system is complete with a substantial 13.5kWh useable battery pack and allows for 100% Depth of Discharge. Beyond the advantage of working with flexible rate tariffs, the All In One has an integrated LoRa to remove the need for long cable runs between the CT and the inverter by making this wireless and can provide whole house backup when paired with a GivEnergy Gateway. Furthermore, the All In One inverter is grid service ready meaning  that end users can take advantage when energy suppliers offer payments to reduce their electrical consumption at certain times.  Up to 6 systems can be connected in parallel, giving 80kWh of useable storage and the ability to deliver an enormous 30kW of power into the home. This features a modular design for ease of handling and installation by splitting into 5 x 30kg parts. AC attributes Max power: 7200W Max current: 32A Number of phases: 1 Battery Information Battery Voltage 260-346V Max Charge Current 25A Max Discharge Current  25A Battery Capacity 13.5kWh Max DoD  100% Communication CAN System Max efficiency 97% IP rating IP65 Weight 150kg Dimensions mm Key features Grid Service Ready Whole House Backup Works with flexible rate tariffs Scalable with a modular design

Read more less

Part No: ALPH-M48112-S Storage Systems - Li-ion Battery Pack  Batteries to be used with All In One Cabinet Alpha ESS Storion T30 Li-Ion Battery Energy Storage System. ALPH-STORION-T30 Complete Storion T30 System consist of 2 parts complete system and M48112-S batteries seperate Storion-T30 3phase Inverter with Cabinet  With HV900112 Battery Management System  With EMS Module - Energy Management System Module  With energe meters and CTS Storion T30 Commercial and Industrial series 3phase AC Coupled Storage Inverter with Cabinet and built-in BMS. Alpha ESS M48112-S battery modules must be used with Alpha Storion T30 3phase All-In-One AC Coupled Storage inverter. Between 5x and 12x M48112-S battery modules can connected in Series offering between 28.5kWh and 68.4kWh of storage capacity. MIN of 5 x M48112-S in series needs to be used with Storion T30 Supplier Part No: M48112-S Weight: 65 kg Battery Type: Lithium Ion Nominal Energy: 5700 Wh Depth of discharge: 90.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5376 W Maximum Discharge Rate (5 Minutes): 5700 W Surge Discharge Rate (15 Seconds): 5376 W Maximum Charge Rate (5 Minutes): 5700 W Brochure Alpha ESS December 2019

Read more less

The GivEnergy AC Charger will charge from surplus PV generation, and also from the grid if you're on an economy tariff. Wi-fi comes as standard and gives access to the powerful monitoring platform, along with remote, site-specific firmware upgrades and troubleshooting via web browser or app. System needs to be connected to the internet to comply with warranty requirements. Product Features Uses GivEnergy Lithium batteries that can be added to extend KWh of battery bank Installed to new builds or retrofitted to an existing solar pv system  Monitor usage through web-app interface Lightweight and compact Backup function supported Effective of Monday, September 11th, the GivEnergy residential battery storage system will no longer offer a 5-year warranty with the option of extending it to 10 years. Instead, all residential batteries, inverters, and AIO units will now come with a standard 12-year warranty. Systems installed before the 11th of September still have 60 days to order a warranty extension. Major announcement: introducing an industry leading 12 year warranty | GivEnergy FAQ: The GivEnergy 12 year warranty | GivEnergy Supplier Part No: GIV-AC3.0 Weight: 22.5 kg Rated Power: 3,000 W

Read more less

Part No: EN-STORAGE-BRACKET Storage Systems - Wall Bracket Wall mounting bracket for the Enphase AC battery modules. One required per battery.  BWM-450MM-A: 450 mm (W) x 311 mm (H) Supplier Part No: BWM-450MM-A Weight: 3.86 kg Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

Read more less

 Part No: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Supplier Part No: X1-FIT-5.0 Charger G4 Weight: 24.5 kg Rated Power: 5,000 W Data Sheet Solax X1 Fit EN

Read more less

 7 UNITS IN STOCK FOR NEXT DAY DELIVERY Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

36 UNITS IN STOCK FOR IMMEDIATE DISPATCH Part No: SOL-3.0K-RAI-48ES-5G-AC Storage Systems - Charger-Inverter 5G Energy Storage Inverter Product Features Natural cooling without external fan Various work mode for different application scenarios IP65 degree, applicable for different installation environments Optional stand-alone mode ensures constant power supply for critical load Available to integrate all renewable energy system including solar, wind, fuel cell etc Advanced BMS to enhance the battery usage and guarantee the longer battery lifespan Compatible with any existing grid-tied PV system, option to upgrade the current grid-tied system to a new battery storage system Convenient real-time monitoring realized via wireless communication and intelligent debugging APP which support one-click inverter configuration Please ensure the SOLIS AC charger is connected on the AC side with a terminal block, not an AC plug. This product is supplied with an energy meter and CT clamp. Supplier Part No:  SOLIS-RAI-3K-48ES-5G-AC-V2 Weight: 15 kg Rated Power: 3,000 W Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Data Sheet Solis AC Coupled

Read more less

ETA 10/10 Part No: KETO-00-80A Storage Systems - Battery Fuse Holder This part is made up of the following items: 1 x  Fuse-switch-disconnector KETO size 00 body (battery isolator)   2 x  NH Fuse-link 80A for KETO-00     Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. KETO size 00 Maximum DC current = 80A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 DIN rail mountable  This part is the Keto-00 disconnector switch with 2 x 80A fuse links.    

Read more less