Solar Panel Fitting & Mounting Kits
Mid Clamp Double V2023 EPDM - H16 – BLACK
Part No: GSE-CLAMP-DOUBLE-H16-V2023-BLA Mounting - Module Clips GSE-CLAMP-DOUBLE-H16-V2023-BLA the H16 clamp is a 35mm clamp, H21 is a 40mm clamp and H26 is a 45mm clamp. Supplier Part No: ART105904 Weight: 0.023 kg
£1.87
End Clamp BLACK 35mm HC / 40mm
Part No: GSE-CLAMP-SINGLE-H21-BLA Mounting - Module Clips Supplier Part No: ART100495 Weight: 0.028 kg
£1.60
Mid Clamp BLACK H16
Part No: GSE-CLAMP-DOUBLE-H16-BLA Mounting - Module Clips Supplier Part No: ART100482 Weight: 0.034 kg
£1.83
Mid Clamp BLACK 35mm HC / 40mm
Part No: GSE-CLAMP-DOUBLE-H21-BLA Mounting - Module Clips Supplier Part No: ART100744 Weight: 0.034 kg
£1.83
IN ROOF - SINGLE END CLAMP V2023 - H16 - STEEL - BLACK
Part No: GSE-CLAMP-SINGLE-H16-V2023-BLA Mounting - Module Clips Keywords: GSECLAMPSINGLEH16BLA, GSE, PV Mounting, Module Clip. Supplier Part No: ART105897 Weight: 0.023 kg Clip Type: 199 Clip H: 46 mm Clip B1: 30 mm Clip Colour: Black
£2.03
Mid Clamp BLACK 40mm HC / 45mm
Part No: GSE-CLAMP-DOUBLE-H26-BLA Mounting - Module Clips Supplier Part No: ART102335 Weight: 0.036 kg
£1.83
End Clamp BLACK 40mm HC / 45mm
Part No: GSE-CLAMP-SINGLE-H26-BLA Mounting - Module Clips Supplier Part No: ART102328 Weight: 0.036 kg
£1.60
Mid Clamp BLACK 50mm
Part No: GSE-CLAMP-DOUBLE-H31-BLA Mounting - Module Clips Keywords: GSE, PV Mounting, Module Clip Supplier Part No:ART101288 Weight:0.042 kg
£1.83
Middle Clamp+ 30 - 50mm Silver
Part No: REN-420082 Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420082 Weight: 0.062 kg Clip Type: 199 Clip H: 51 mm Clip B1: 10.8 mm Clip Colour: Silver
£2.05
Middle Clamp+ 30 - 50mm Black
Part No: REN-420082-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420082-BE Weight: 0.06 kg Clip Type: 199 Clip H: 51 mm Clip B1: 10.8 mm Clip Colour: Black
£3.02
End Clamp+ 30 - 50mm Silver
Part No: REN-420081 Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081 Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Silver
£2.36
End Clamp+ 30 - 50mm Black
Part No: REN-420081-B Mounting - Module Clips Technical Data: Dimensions: 35x40x60 Weight: 0.064kg Set: complete pre-assembled set Material: Aluminium; Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420081-BE Weight: 0.06 kg Clip Type: 199 Clip H: 50 mm Clip B1: 9.5 mm Clip Colour: Black
£3.46
RS1 Universal End and Mid Clamp 30 - 50mm Black ONE FOR ALL
Part No: REN-420080-B Mounting - Module Clips This innovative masterpiece makes your next PV-project a whole lot easier. The RS1 works as mid- and end clamp. It is heigth adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height. Twisting the RS1‘s head changes the functionality from end- to mid-clamp. Installation and positioning works one handed. At the same time it minimizes needed storage space and saves administrational costs in item management. The RS1 is a real time saver and generates savings over your entire value chain. Technical Data: Dimensions: 35x36.5x60 Weight: 0.083kg Set: complete pre-assembled set Material: Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420080-BE Weight: 0.08 kg Clip Type: 199 Clip H: 60 mm Clip B1: 36.5 mm Clip Colour: Black
£4.19
RS1 Universal End and Mid Clamp 30 - 50mm Silver ONE FOR ALL
Part No: REN-420080 Mounting - Module Clips This innovative masterpiece makes your next PV-project a whole lot easier. The RS1 works as mid- and end clamp. It is heigth adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height. Twisting the RS1‘s head changes the functionality from end- to mid-clamp. Installation and positioning works one handed. At the same time it minimizes needed storage space and saves administrational costs in item management. The RS1 is a real time saver and generates savings over your entire value chain. Technical Data: Dimensions: 35x36.5x60 Weight: 0.083kg Set: complete pre-assembled set Material: Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: 420080 Weight: 0.083 kg Clip Type: 199 Clip H: 60 mm Clip B1: 36.5 mm Clip Colour: Silver
£2.70
Mid Clamp Rapid16 30-40mm Black
Part No: SLT-131121-901 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black
£2.51
End Clamp Rapid16 30-40mm Black
Part No: SLT-131101-901 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black
£2.51
Mid Clamp Rapid16 30-40mm Silver
Part No: SLT-131121-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-001 Weight: 0.049 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver
£1.57
End Clamp Rapid16 40-50mm Silver
Part No: SLT-131101-002 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-002 Weight: 0.055 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver
£1.57
End Clamp Rapid16 30-40mm Silver
Part No: SLT-131101-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-001 Weight: 0.04 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver
£1.57
Mid Clamp Rapid16 40-50mm Silver
Part No: SLT-131121-002 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131121-002 Weight: 0.05 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver
£1.57
End Clamp H Rapid16 30-40mm Silver
Part No: SLT-131101-003 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No: 131101-003 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver
£1.57
Mid Clamp Rapid16 40-50mm Black
Part No: SLT-131121-902 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No:131121-902 Weight:0.05 kg Clip Type:199 Clip H:50 mm Clip B1:10 mm Clip Colour:Black
£2.51
End Clamp Rapid16 40-50mm Black
Part No: SLT-131101-902 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. Supplier Part No:131101-902 Weight:0.055 kg Clip Type:199 Clip H:50 mm Clip B1:10 mm Clip Colour:Black
£2.51
Evolution Black Mid Clamp with Bracket and Screws 30-40mm FULL Set
Part No: EASY-A002V41N-SET Mounting - Module Clips This part is made up of the following items: 1 x EASY-A004V40 Middle Bracket EVOLUTION Silver 1 x EASY-A002V41N Middle Clamp EVOLUTION Standard Black 4 x EASY-V003V02 Bracket Screw 6 x 40 1 x EASY-V012V02 Module Clamp Screw M6 X 30 (for Module Frames 30 - 40mm) This is a full set consisting of Bracket and Clamp and Bracket screws and Clamp screw. Weight: 0.388 kg
£2.59
Solar Roof Universal Mid/End Clamp 30-46mm Silver
Part No: ER-C-U30-46-S Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers. Supplier Part No: C-U/30/46 Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Silver
£1.03
Solar Roof Universal Mid/End Clamp 30-46mm Black
Part No: ER-C-U30-46-B Mounting - Module Clips Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers. Supplier Part No: CU30-46-B Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Black
£1.37
