Photovoltaic

Part No: FE-HV-BRACK Storage Systems - Battery Rack   Battery brackets for use with the HV2600 battery, 1 pair required per battery.   Please note; These brackets are not required for the AIO system, only Fox systems using the hybrid or AC inverter chargers. Supplier Part No: HV Brackets x 2 (pair) Weight: 2 kg  

Read more less

PLEASE NOTE THIS PRODUCT IS CURRENTLY ONLY AVAILABLE WITH A SOLIS INVERTER Part No: SOL-DLS-W3 Display - Web Interfaces The Solis Wi-Fi stick is a very clever, simple, external plug-in device, which is fully universal across the Solis inverter range. The S3 Wi-Fi Stick is faster, more responsive, and has an all-round better build quality. This 3rd Gen device includes 3 external LEDs to confirm connection status as well as a reset button on the outside Connect to up to 10 inverters with one S3 datalogger  Quick Installation which only requires the installer to have a smartphone/laptop to hand; the only customer requirement is a WIFI network within range of the inverter. The unit provides a simple to install monitoring solution for end customers with access to web, iPhone, and Android app monitoring.  In addition to free access to the monitoring website there is also an installer level login so the installer can view all their Solis inverters installed in one place.  The unit provides a user friendly, easily accessible solution to inverter monitoring.  Keywords: SOLDLSW, Display, Web Interface

Read more less

A new battery in the US series from Pylontech. The US5000 is a 48V battery with incredible features to provide a competitive edge in the market.  Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 5-year warranty extendable Long cycle life and superior performance Compatible with tier 1 inverter brands Supplier Part No: US5000 Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W Data Sheet US2000C, US3000C and US5000 Click Here For Spec Sheet  

Read more less

Part No: GIV-BAT-ISO-100A Storage Systems - Battery Isolator DC Miniature Circuit Breaker for DC protection on GivEnergy Systems rated at 100A  Product Features Load protection overload/short circiut protection Has been designed for PV systems  nominal volts at 80V and 100A current rating Provide scientific arc extinguising and flash barrier technology to give safe current interruption Supplier Part No: GIVMCB100A Weight: 0.15 kg  

Read more less

Utilising lithium iron phosphate, GivEnergy batteries are extremely safe and can be installed in a wide range of locations. Their market-leading battery warranty means you can use your battery as much as you want for 12 years and still be covered. Features:  Plug & Play functionality Fully Recyclable at end of life Remote Firmware upgrades IP65 Rated 12 Year warranty Technical: Dual BMS system allowing greater control and functionality Scalable Battery Packs - Up to 5 per inverter in 2019 0.5C-1C charge and discharge rate Retrofit compatible 157Wh per Kg +/- 5% Depth of Discharge 100% Effective of Monday, September 11th, the GivEnergy residential battery storage system will no longer offer a 5-year warranty with the option of extending it to 10 years. Instead, all residential batteries, inverters, and AIO units will now come with a standard 12-year warranty. Systems installed before the 11th of September still have 60 days to order a warranty extension. Major announcement: introducing an industry leading 12 year warranty | GivEnergy FAQ: The GivEnergy 12 year warranty | GivEnergy NOTICE: When connecting Gen 1 and Gen 2 GivEnergy products together, for example a Gen 1 hybrid inverter with a Gen 2 9.5 battery, you must use a G1 to G2 cable. This would also be required if you connect a Gen 2 9.5 battery to a Gen 1 8.2 battery.   If you are connecting Gen 2 products together, such as a Gen 2 hybrid and a Gen 2 9.5 battery, you must use a G2 to G2 cable. Please contact your account manager or technical contact for more details. Supplier Part No: GIV-BAT9.5 Weight: 110 kg Battery Type: Lithium Ion Nominal Energy: 9500 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 4096 W Maximum Discharge Rate (5 Minutes): 4096 W Surge Discharge Rate (15 Seconds): 4096 W Maximum Charge Rate (5 Minutes): 4096 W

Read more less

Part No: N5014607-125A Storage Systems - Battery Fuses 125A fuse link to be used with the Keto-00 disconnector switch. The Keto-00 requires two fuses.    Supplier Part No: N5014607 Weight: 0.17 kg

Read more less

Part No: SHINE-WIFI-X Display - Web Interfaces Shine-Wi-Fi-X is a monitoring solution for grid-tie, off-grid inverter, single and three phase inverters.  Simple Allows for cable free, easy installation Plug-and-play solution USB data interface Reliable Max. communication range of 50m Works with the ShineServer Smart Both Android and IOS UI are available Shine Wi-Fi X is for -X range inverters

Read more less

Part No: KETO-00 Storage Systems - Battery Fuse Holder Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. Keto size 00 Maximum DC current = 160A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 Wall mountable. The Keto-00 needs two fuses at the appropriate rating to be added. Size these based on the maximum battery current with a safety factor applied.  Supplier Code: T500113002 Supplier Part No: T500113002 Weight: 0.73 kg Data Sheet NH Fuse Link (English, German)  

Read more less

Part No: HUA-SMART-WLAN-FE  Display - Web Interfaces   Huawei Smart Dongle  - Wi-Fi and Ethernet SDongleA-05 (HUA-SMART-WLAN-FE) is a smart communications expansion module that works with  Huawei inverters (3KTL-M0 to 20KTL-M0) to implement communication between inverters and the management system using WLAN (Wireless) or FE (Fast Ethernet). A Smart Dongle can be used for daisy chaining devices using RS485 communication (inverter daisy chained, or inverters connected with other devices). A maximum of 10 devices can be connected together. When multiple inverters are connected together, only one Smart Dongle or one SmartLogger is allowed.  

Read more less

Part No: GIV-3G-DONGLE-5YEAR Display - Web Interfaces GivEnergy 3G Mobile Internet dongle for real time monitoring when used with the APP. Comes with 5 Year Dataplan.  Product Features Flexible monitoring through IOS and Android IP65 Easy configuration and install Monitoring points every 5 minutes USB port type with Micro SIM Card To be used when there is no broadband internet on site or access to broadband is not possible.  Supplier Part No: 3G WIFI DONGLE - 5YR DATA Weight: 0.063 kg  

Read more less

Part No: CT-100-SPLIT-ROW Display - Current Sensor Clamps Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered    Supplier Part No:SPLIT-ROW Weight:1 kg

Read more less

Part No: GIV-WIFI-DONGLE Display - Web Interfaces   GivEnergy Wi-Fi dongle for real time monitoring when used with the APP Product Features Flexible monitoring through IOS and Android IP65 Easy configuration and install Monitoring points every 5 minutes USB port type with Micro SIM Card   Supplier Part No: WiFi Dongle Weight: 0.13 kg  

Read more less

Part No: MC4-CRIMP-TOOL-EVO2-PRO Tools - Accessories Crimping pliers for industrial (professional) use PV-CZM-41100 for MC4-EVO2 only. These are suited for the processing of high numbers of pieces and can be adjusted to the product to be processed with the help of changeable locators and crimp inserts. Crimp cycles: 50 000 cycles after which new individual crimp inserts can be bought as spare parts. Complete tool containing insert holder (handle) with crimp insert to suit 2.5; 4 and 6 mm2 versions of the original MC4-Evo2 connectors.     Part code: 32.6020-41100 PV-CZM-41100     Important PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR STANDARD MC4 CONNECTORS. ITS FOR MC4-Evo2 ONLY   Supplier Part No: 32.6020-41100 Weight: 0.85 kg

Read more less

Part No: MYEN-EVSE-TEST-BOX EV Charging - EV Monitoring and Control The EVSE test box can be used to test zappi EV chargers and other AC chargepoints along with a multifunction electrical tester (not supplied). Can test type 1 or type 2 connections Suitable for single phase and three phase zappis RCD test is carried out with test box and user's multifunction electrical tester   Supplier Part No: EVSE-TEST-BOX Weight: 2.021 kg

Read more less

Part No: MC4-CRIMP-TOOL Tools - Accessories Crimping pliers for private use PV-CZM-BS   Suitable for the assembly of products approved by TÜV in small amounts. Simple crimping tool without locator and without spare parts (not possible to replace the inserts) Crimp cycles : 30’000 cycles guaranteed   Complete tool for the assembly of the original MC4.     part code 32.6025 PV-CZM-BS   PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY.   Important PLEASE NOTE THIS TOOL IS NOT SUITABLE FOR MC4-Evo2 CONNECTORS. ITS FOR STANDARD MC4 ONLY. Supplier Part No: 32.6025 Weight: 0.59 kg

Read more less

Part No: MC4-SPAN-MET Tools - Accessories Assembly and unlocking tool, incl. belt pouch (consisting of 2 open-end spanners), metalMC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6058 Weight: 0.3 kg

Read more less

Part No: MC4-SPAN Tools - Accessories Open-end spanner and unlocking tool MC4   To tighten and unscrew the cable gland and to open the locking device of the connection.ords: MC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6024 Weight: 0.05 kg

Read more less

Part No: CS-T4-DT Tools - Accessories    Disconnect tool for the Tlian T4 connectors on Canadian Solar modules. This also works on the MC4 and H4 connectors/cables. 1 x T4-DT  Picture shows both sides of the disconnecting tool.   Supplier Part No: CS-T4-DT Weight: 0.02 kg

Read more less

Part No: MC4-CAP-MALE Cables - Accessories Snap-in lock   Supplier Part No: 32.0716 Weight: 0.019 kg

Read more less

Part No: MC4-CAP-FEMALE Cables - Accessories Snap-in lock Supplier Part No: 32.0717 Weight: 0.005 kg

Read more less

Part No: MC4-15-MAL Cables - Connectors Supplier Code:32.0015P0001 Male cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm²   Rated current: 39 A (for 4 and 6mm2 cable)   Please use correct MC4 approved tools to crimp these connectors on to bare cables.    Supplier Part No: 32.0015P0001-UR Weight: 0.01 kg

Read more less

Part No: JK03M Cables - Connectors PV Cable Connector: PV-JK03M/xy series   High security, only unbolt by tools. Low contact resistance. Retaining structure of nut to keep torsion valid. Resistance to ozone and ultraviolet radiation. Degree of Protection : IP68. Certification of TÜV, UL, and JET. Compatible with the first-generation product of JinKO.   Supplier Part No: JK03M Items in this pack: 2 Weight: 0.14 kg

Read more less

Part No: JA-QC4-10-35-1500V Cables - Connectors   Rated 1500V DC QC4.10-35 connector pair – Male and Female Required to comply with ‘IEC 62548:2016 - Photovoltaic (PV) arrays - Design Requirements’ regarding DC connectors inter-compatibility when using JA Solar modules supplied with QC4 connectors.   Supplier Part No: QC4.10-35 Connector Weight: 0.03 kg

Read more less

Part No: HQC4-PAIR Cables - Connectors HQC4 Connector pair (1x Male, 1x Female) for Q-Cells Supplier Part No: HQC4-PAIR Weight: 0.042 kg

Read more less

Part No: MC4-EVO2A-0316-FEM Cables - Connectors The MC4-Evo2A is the latest addition to the Stäubli Electrical Connector PV portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4 Evo 2 Female cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL. THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.       DI comes with Maroon seal. Supplier Code: 32.0316P0001 Rated current: 45A 4mm2 and 53A 6mm2 cables Important The MC4-EVO2A-0316-FEM connectors are compatible with the MC4-EVO2-MAL1 connectors. Supplier Part No: 32.0316P0001 Weight: 0.013 kg

Read more less

Part No: MC4-CONN14-2-PACK Cables - Connectors A pack of 2x Male and 2x Female cable couplers. Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm²   Rated current: 39 A (for 4 and 6mm2 cable) Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min)  Cross section: 4 - 6 mm² Outer diameter cable (dA): 5,0 - 6,0mm  Please use correct MC4 approved tools to crimp these connectors on to bare cables.  Supplier code: 32.0014P0001-UR and 32.0015P0001-UR Keywords: MC4CONN2PACK, Multi Contact, PV Cable   Weight: 0.04 kg Rated Power: 250 W

Read more less

Part No: MC4-EVO2-CONN86-2-PACK Cables - Connectors The MC4-Evo2 is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus. 1xMale, 1xFemale. Approved for 1500 V DC (IEC) Rated current: 45A 4mm2 and 53A 6mm2 cables MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) Supplier code: 32.0086P0001-UR and 32.0087P0001-UR    - for use with 4mm2 & 6mm2 with an outside diameter of 4.7mm-6.4mm (including insulating part)   DII comes with Grey seal.   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL.  THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR. Weight: 0.052 kg

Read more less

Part No: EN-Q-DCC-2-INT Cables - Connectors Enphase DC adaptor to MC4 (max voltage 100V DC).  Single part.  The DC adaptor is already included with the IQ7 inverter range. This partno is the adaptor on its own in case of needing to replace a damaged or lost one.    Supplier Part No:Q-DCC-2-INT Weight:0.07 kg

Read more less

Part No: EN-Q-CONN-R-1M Cables - Connectors Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10M Weight:0.05 kg

Read more less

Part No: EN-Q-CONN-R-1F Cables - Connectors Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10F Weight:0.05 kg

Read more less

Part No: MC4-2M-2 Cables - Pre Terminated Cables MC4 10M2, 1xMale, 1xFemale each cable, MC4.PV Cable, Pre Terminated Cable. Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock. A mix of 4 and 6mm will be provided.   Supplier Part No: 96274 Weight: 0.27 kg Length: 2 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-10M-1 Cables - Pre Terminated Cables Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Supplier Part No: 32.00226-10M21 Weight: 0.58 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-5M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-50021 Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: EN-Q-25-10-1 Cables - Single Phase AC Cable Enphase Q Cable 1ph 1.3m Portrait (price per connector)   Supplier Part No:Q-25-10-240 Weight:0.22 kg

Read more less

Part No: MC4-Y-CONN-FEM Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0334 Weight: 0.25 kg

Read more less

Part No: MC4-Y-CONN-MAL Cables - Connectors mC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0333 Weight: 0.25 kg

Read more less

Part No: CABLE4-1-25 Cables - DC Cables 4 mm², single-core, black, 25m NEW H1Z2Z2-K certified 25m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-25 Weight: 1.365 kg Length: 25 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: EN-Q-25-10-3P-1 Cables - Cables Enphase Q Cable 3ph 1.3m Portrait (price per connector)   Supplier Part No:Q-25-10-3P-200 Weight:0.32 kg

Read more less

Part No: EN-Q-25-17-1   Cables - Single Phase AC Cable Enphase Q Cable 1ph 2.0m Landscape 60-cell (price per connector)   Supplier Part No:Q-25-17-240 Weight:0.312 kg

Read more less

Part No: MC4-SPL-2 Cables - Connectors MC-4 contact doubler - Pack of 2 Pairs MC-4 splitter kit, consisting of: 2 x MC-T splitter sockets (2 x female connectors, 1 x male connector) 2 x MC-T4 splitter plugs (2 x male connectors, 1 x female connector) For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SPL2, Stäubli, PV Cable   Supplier Part No: 95036 Weight: 0.25 kg

Read more less

Part No: MC4-10M-2PACK Cables - Pre Terminated Cables 2x10m cable, 1xMale, 1xFemale each MC4 Pre-terminated. Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Weight: 1.16 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: EN-Q-25-17-3P-1 Cables - Cables Enphase Q Cable 3ph 2.0m Landscape 60-cell (price per connector)   Supplier Part No:Q-25-17-3P-160 Weight:0.412 kg

Read more less

Part No: MC4-SPL-Y-CONN Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm² MC-4 splitter kit, consisting of: MC4-Y-CONN-FEM and MC4-Y-CONN-MAL For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SYPL2, Stäubli, PV Cable   Weight: 0.5 kg

Read more less

Part No: CABLE4-1-50 Cables - DC Cables 4 mm², single-core, black, 50m NEW H1Z2Z2-K certified 50m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety.    Supplier Part No: CABLE4-1-50 Weight: 2.675 kg Length: 50 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE4-1-100 Cables - DC Cables 4 mm², single-core, black, 100m NEW H1Z2Z2-K certified 100m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-100 Weight: 5 kg Length: 100 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE4-1-250 Cables - DC Cables 4 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-250 Weight: 14.81 kg Length: 250 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE4-1-500 Cables - DC Cables 4 mm², single-core, black, 500m NEW H1Z2Z2-K certified 500m solar cable with length label. Supplied on a reusable spool. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: 26036 Weight: 30 kg Length: 500 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE6-1-500 Cables - DC Cables 6 mm², single-core, black, 500m 500m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 6 mm²  (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.  Important Alternative cable is BC-CABLE6-1-500 Supplier Part No: 26038 Weight: 38 kg Length: 500 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

Read more less