Powerland’s solar mounting systems are built to safely and efficiently install your solar panels, ensuring they are positioned for maximum energy output while maintaining the structural integrity of your roof. We also offer a range of installation options, so please feel free to contact us today!
Solar Panel Fitting & Mounting Kits
GSE Lateral Flashing - UNIVERSAL - 1290MM – BLACK NEW DPO - ART104644
Part No: GSE-FLASH-LAT-DPO-BLA Mounting - In Roof This black lateral flashing comprises the sides of the PV array. A continuous line of flashings should be installed on each side of the array and a 15cm overlap distance should be observed between pieces of flashing. Keywords: GSEFLASHLATBLA, GSE, PV Mounting, In Roof Note the new DPO GSE frames don’t work with the old lateral flashing but ALL GSE Frames work with the GSE-FLASH-LAT-DPO-BLA flashings. Supplier Part No: ART104644 Weight: 0.57 kg Length: 1.29 m
£16.81 Exc. VAT
£20.17 Inc. VAT
GSE GSE Frame Portrait DPO - 1650/1135 - ART105162
Part No: GSE-FRAME-DPO-1650-1135 Mounting - In Roof GSE module mounting plate for one portrait PV module with length 1610-1800mm and width 1130-1135mm. 1610mm is the recommended length. Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!CX Notice: The DPO frames are not currently supported in the Powerland design tool. To generate a design please use GSE's own configurator attached in the documents tab of this product page.
£24.66 Exc. VAT
£29.59 Inc. VAT
GSE Mid Clamp Double V2023 EPDM - H16 – BLACK W/ EPDM FOAM ATTACHED - ART105904
Part No: GSE-CLAMP-DOUBLE-H16-V2023-BLA Mounting - Module Clips EPDM foam attached. GSE-CLAMP-DOUBLE-H16-V2023-BLA Supplier Part No: ART105904 Weight: 0.023 kg
£2.19 Exc. VAT
£2.63 Inc. VAT
GSE GSE Flashing Hook
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-FLASHING-HOOK Mounting - In Roof Please note the the manufacturer is changing the design of this product. Functionality will remain the same so please don't be alarmed if the product you receive looks slightly different to the one pictured
£0.94 Exc. VAT
£1.13 Inc. VAT
GSE IN ROOF - SINGLE END CLAMP V2023 - H16 - STEEL - BLACK W/ EPDM FOAM ATTACHED - ART105897
Part No: GSE-CLAMP-SINGLE-H16-V2023-BLA Mounting - Module Clips EPDM foam attached. Keywords: GSECLAMPSINGLEH16BLA, GSE, PV Mounting, Module Clip ART105897
£1.96 Exc. VAT
£2.35 Inc. VAT
GSE Pre-compressed seal roll (5.5m) - ART101088
Part No: GSE-SEAL Mounting - In Roof The precompressed seal is used to ensure a complete waterproof perimeter around the PV array. The seal is pressed on to the flashing pieces at the border with the roof tiles. Supplier Part No: ART101088 Weight: 0.45 kg
£14.87 Exc. VAT
£17.84 Inc. VAT
GSE Top Right Corner Flashing BLACK - ART100574
Part No: GSE-FLASH-TOP-R-BLA Mounting - In Roof Supplier Part No: ART100574 Weight:0.4 kg
£24.63 Exc. VAT
£29.56 Inc. VAT
GSE GSE Pop Rivet (Fixation for Top Centre Flashings) - ART100389
Part No: GSE-RIVET Mounting - In Roof GSE pop rivet, fixing for top centre flashing. Made up of two key parts; the rivet body and the setting mandrel. The pop rivet is inserted into a pre-drilled hole in the materials you're joining together. Supplier Part No: ART100389 Weight: 0.002 kg
£0.09 Exc. VAT
£0.11 Inc. VAT
GSE Corner Piece (To Join Module to Top Centre Flashings) BLACK - ART101409
Part No: GSE-CORNER-BLA Mounting - In Roof Keywords: GSECORNERBLA, GSE, PV Mounting, In Roof Supplier Part No: ART101409 Weight:0.15 kg
£6.15 Exc. VAT
£7.38 Inc. VAT
GSE Top Left Corner Flashing BLACK - ART100945
Part No: GSE-FLASH-TOP-L-BLA Mounting - In Roof Keywords: GSEFLASHTOPLBLA, GSE, PV Mounting, In Roof Supplier Part No:ART100945 Weight:0.4 kg
£24.63 Exc. VAT
£29.56 Inc. VAT
GSE GSE Clamp Wedges Twin Pack ( 2x Left / 2x Right ) - GSE-WEDGES-TWINPACK - ART105876
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-WEDGES-TWINPACK Mounting - In Roof Supplier Part No: GSE-WEDGES-TWINPACK Items in this pack: 4 Weight: 0.035 kg
£1.12 Exc. VAT
£1.34 Inc. VAT
GSE GSE Rooflex Flexible Sealing Strip 330mm x 5m - ART106352
Part No: GSE-ROOFLEX-5M Mounting - In Roof This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents. Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications. Supplier Part No: ART100385 Weight: 2.01 kg
£67.97 Exc. VAT
£81.56 Inc. VAT
GSE GSE Metal Top Centre Flashing BLACK - ART101041
Part No: GSE-FLASH-TOP-C-BLA Mounting - In Roof Keywords: GSEFLASHTOPCBLA, GSE, PV Mounting, In Roof Supplier Part No: ART101041 Weight: 1.4 kg Length: 1.5 m
£32.54 Exc. VAT
£39.05 Inc. VAT
GSE Junction for Top Flashing BLACK - ART100039
Part No: GSE-JUNCTION-BLA Mounting - In Roof Supplier Part No: ART100039 Weight: 0.4 kg
£8.12 Exc. VAT
£9.74 Inc. VAT
GSE GSE In-Roof Screw 6.5x60 mm - EPDM - A2 - BLACK - ART106051
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-ART106051 Mounting - Wood Screws In-Roof Screw 6.5x60 mm - EPDM - A2 - BLACK Keywords: GSESCREWBLA, GSE, PV Mounting, In Roof, gse in roof
£0.72 Exc. VAT
£0.86 Inc. VAT
GSE GSE Frame Portrait DPO - 1840/1135
Part No: GSE-FRAME-DPO-1840-1135 Mounting - In Roof Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! To generate a design please use GSE's own configurator attached in the documents tab of this product page. Supplier Part No: ART105211 Weight: 3 kg
£27.86 Exc. VAT
£33.43 Inc. VAT
Powerland Self-Tapping Screw + GSE Washer BLACK - single
Part No: GSE-SCREW-BLA Mounting - Wood Screws This is a single screw and washer. Keywords: GSESCREWBLA, GSE, PV Mounting, In Roof, gse in roof Supplier Part No: ART101552 Weight: 0.01 kg
£0.31 Exc. VAT
£0.37 Inc. VAT
GSE GSE Rooflex Flexible Sealing Strip 500mm x 5m
Part No: GSE-ROOFLEX-5M-0.5M Mounting - In Roof This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents. Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications. Supplier Part No: ART101405 Weight: 2.01 kg
£82.07 Exc. VAT
£98.48 Inc. VAT
GSE GSE - Self Tapping Screw - 6,5MMx45MM + EPDM washer - ART105988
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-ST-SCREW Mounting - Wood Screws GSE - SCREW - A2 - STAINLESS STEEL - 6,5MMx45MM + EPDM Keywords: GSESCREWBLA, GSE, PV Mounting, In Roof, gse in roof
£0.56 Exc. VAT
£0.67 Inc. VAT
GSE GSE XXL Frame Portrait DPO 2030-1135
Part No: GSE-FRAME-DPO-2030-1135 Mounting - In Roof This new product GSE Portrait Half-Frame H2030: allows the safe and simple integration in Portrait format of 500w+ PV modules. from 1990 to 2180 mm in height from 991 to 1305 mm in width benefits from the experience of its predecessors Half-Frame H1650 and H1840 in terms of conception and installation launched over a year ago has been tested by recognized laboratories in Europe to guarantee the strength and durability of the installation. CLAMP ATTACHEMENT POINTS: Due to the increased surface area and weight of the modules compatible with this XXL frame range (around 2.5 m² and 30 kg) and in order to ensure the mechanical stability of the modules, we recommend doubling the number of middle and end clamps when installing the modules
£29.25 Exc. VAT
£35.10 Inc. VAT
Powerland GSE Front of Square – Z profile bottom part (thickness 3mm)
Part No: GSE-GM-FRONTAL-BRCKT Mounting - Ground Mount Frontal view of bracket (thickness 3mm) – Z profile bottom part (thickness 3mm) The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100002 Weight: 0.1 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£1.90 Exc. VAT
£2.28 Inc. VAT
GSE GSE - RAIL END CAP - ART101691
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-ENDCAP-RAIL-PLUG Mounting - Rail End Caps RAIL END CAPS Supplier Part No: ART101691
£1.47 Exc. VAT
£1.76 Inc. VAT
GSE GSE End Clamp BLACK 35mm HC / 40mm - ART100495
CLICK HERE FOR GSE DESIGN TOOL Part No: GSE-CLAMP-SINGLE-H21-BLA Mounting - Module Clips Supplier Part No: ART100495 Weight: 0.028 kg
£1.43 Exc. VAT
£1.72 Inc. VAT
GSE Semi Rigid Bottom Flashing
Part No: GSE-ART106044 Mounting - In Roof Semi Rigid Bottom Flashing
£63.59 Exc. VAT
£76.31 Inc. VAT
GSE GSE Tile Support 25x40
Part No: GSE-ART106072 Mounting - In Roof GSE Tile Support 25x40
£9.23 Exc. VAT
£11.08 Inc. VAT
GSE GSE Hook for Tiles Support
Part No: GSE-TILES-SUP-HOOK Mounting - In Roof ART106100 - Hook for Tiles Support
£3.43 Exc. VAT
£4.12 Inc. VAT
GSE Flashing ODL Adaptator - (Left) Velux MK08 v.2022 ONLY
Part No: GSE-VELUX-MK08-L-2022 Mounting - Roof Flashings Flashing ODL Adaptator Left For Velux Size 08 - v2022
£47.95 Exc. VAT
£57.54 Inc. VAT
GSE GSE Frame Portrait DPO - 1650/1100
Part No: GSE-FRAME-DPO-1650-1100 Mounting - In Roof GSE In-Roof System™ enables modules installation on every type of roof covering (curved tiles, interlocking, flat tiles, slates, metal, zinc, trapezoidal), as well as on new buildings like retrofit buildings. Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE SEGEN OR GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!
£23.92 Exc. VAT
£28.70 Inc. VAT
GSE GSE In-Roof Pre-compressed seal roll (5m)
Part No: GSE-ART106373 Mounting - In Roof The precompressed seal is used to ensure a complete waterproof perimeter around the PV array. The seal is pressed on to the flashing pieces at the border with the roof tiles.
£15.63 Exc. VAT
£18.76 Inc. VAT
GSE GSE/VELUX lateral Flashing for MK08 (Right) 2020 ONLY
Part No: GSE-VELUX-MK08-RIGHT Mounting - Roof Flashings GSE/VELUX lateral Flashing for MK08 (Right) Supplier Part No: ART103629 Weight: 0.57 kg
£34.02 Exc. VAT
£40.82 Inc. VAT
GSE Mid Clamp BLACK 35mm HC / 40mm
Part No: GSE-CLAMP-DOUBLE-H21-BLA Mounting - Module Clips Supplier Part No: ART100744 Weight: 0.034 kg
£1.67 Exc. VAT
£2.00 Inc. VAT
Powerland Ground Mounting -Rail 40x60 - 3.58m
Part No: GSE-GM-RAIL-3.58 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No:ART105078 Weight:3.981 kg Length:0 m
£35.95 Exc. VAT
£43.14 Inc. VAT