Battery Storage

Part No: PYLON-US2000C Storage Systems - Li-ion Battery Pack          The newest 2.4kWh battery from Pylontech now boasts 95% DoD and a 10 year warranty. The batteries are modular so banks can be built up in units of 2.4kWh and they are simply daisy chained together. Key features 95% Depth of discharge (80% recommended when paired with a Sofar ME3000) Up to 16 batteries in a single stack, allowing a total capacity of 38.4kWh without additional hardware. >6000 Life Cycles The Pylontech US2000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle.  The Pylontech US2000C has an incredible DoD of 95%  Supplier Part No:PYLON-US2000C Weight:24 kg Battery Type:Lithium Ion Nominal Energy:2400 Wh Depth of discharge:95.00 % Voltage:48 V Continuous Discharge Rate (Normal Use):1200 W Maximum Discharge Rate (5 Minutes):2400 W Surge Discharge Rate (15 Seconds):4320 W Maximum Charge Rate (5 Minutes):2400 W   Data Sheet US2000C, US3000C and US5000

Read more less

Part No: PYLON-US5000-1C Storage Systems - Li-ion Battery Pack Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 7-year warranty extendable to 10 if registered online, using the link below. Long cycle life and superior performance Compatible with tier 1 inverter brands To get the full 10 year warranty (3 years extra) you have to register here: http://en.pylontech.com.cn/service/support.   Supplier Part No: US5000 1C Weight: 40.4 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W  

Read more less

Pylon US3000C LiFePo4 Battery 3.5kWh for Solar Product Features: Modular design for ease of expansion. 95% Depth of Discharge (DoD). Usable capacity 3374Wh. Parallel capability of up to 16 units. Intelligent BMS protecting battery cells. 6000 Cycles. RS485 and CAN compatible. Comes with 7-year standard warranty which is extendable to 10-years upon registration. Installation flexibility (Rack mount or Wall-mount). You can register the Pylon US3000C for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the 'sign up battery' page.  The US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems.

Read more less

Part No: BRACK-US5000 Storage Systems - Accessory   A set of battery brackets which allows vertical stacking of the Pylon battery unit. 1 set required per additional battery added Supplier Part No: BW0PLUSUS5KBZJ01 Weight: 2.37 kg  

Read more less

myenergi Libbi 5kWh Home Battery The Myenergi libbi stores excess electricity for when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with existing myenergi devices. libbi is modular by design, meaning each module can store up to 5kWh of electricity, so combining 4 of them together would provide up to 20kWh of storage. Nominal capacity: 5.12 kWh Usable capacity: 4.6 kWh Depth of discharge (DoD): 90% Max power: up to 5kW depending on inverter [see datasheet] Round trip efficiency: 94% Operating voltage range: 44.8 - 56.5V Max Charge/discharge current: up to 100A depending on inverter [see datasheet] Cycle Life: 10,000 cycles Dimensions: 540 x 500 x 240 mm Weight: 58 kg IP65 protection grade Warranty of 10 years LIBBI-B05h

Read more less

Part No: FE-HV-EP11-10Y Storage Systems - Li-ion Battery Pack Fox EP11 The EP11 is a high-performance, scalable battery storage system, allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in parallel allowing for a maximum storage capacity of 41.6kwh. Scalable to 41.6 kWh 90% Depth of Discharge Floor or Wall Mounting Compact & Easy Installation IP65 Protection Level High Voltage and High Efficiency 5-Year Warranty + 5 Year warranty extension Weight: 99 kg Battery Type: Lithium Ion Nominal Energy: 10360 Wh Depth of discharge: 90.00 % Voltage: 384 V Continuous Discharge Rate (Normal Use): 10368 W Maximum Discharge Rate (5 Minutes): 10368 W Surge Discharge Rate (15 Seconds): 24960 W Maximum Charge Rate (5 Minutes): 10368 W

Read more less

Part No: FE-HV-EP5-H Storage Systems - Li-ion Battery Pack Fox EP5-H The EP5-H is a high-performance, scalable battery storage system, allows for maximum flexibility, making it suitable for a broad range of storage applications. With a FE-JUNBOX-HV, additional batteries can be installed in parallel allowing for a maximum storage capacity of 20.8kwh. Battery heating and fire suppression Scalable to 20.8 kWh 90% Depth of Discharge Floor or Wall Mounting Compact & Easy Installation IP65 Protection Level High Voltage and High Efficiency 10-year warranty upon registration

Read more less

Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information.   UK & EU Only - These batteries no longer include mounting brackets and these must be purchased separately UK & EU Only - FE-HV-BMS-V2 is compatible with both current and new HV2600 (FE-HV2600 & FE-HV2600-V2) UK & EU Only - FE-HV2600-V2 is NOT compatible with current BMS and AIO Inverters part numbers: FE-HV-BMS, FE-AIO-H1-3.7-E, FE-AIO-H1-5.0-E, FE-AIO-H3-6.0-E, FE-AIO-H3-8.0-E, FE-AIO-H3-10.0-E This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: H2600-V2 (HV 2.6kWh) Battery Weight: 30 kg Battery Type: Lithium Ion Nominal Energy: 2560 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 2560 W Maximum Discharge Rate (5 Minutes): 3000 W Surge Discharge Rate (15 Seconds): 3600 W Maximum Charge Rate (5 Minutes): 2560 W

Read more less

Part No: FE-HV-EQS-4800 Storage Systems - Li-ion Battery Pack Fox ECS - High Voltage Battery (Slave) EQ4800 4.66 kWh Capacity Scalable to 41.94 kWh  90% Depth of Discharge Large Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Also compatible with the predecessor battery ECM/S-4800 Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 9 modules in a stack (1x Master + 8x Slaves)   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: FE-HV-EQS-4800 Weight: 41.5 kg Rated Power: 4,800 W Battery Type: Lithium Ion Nominal Energy: 4450 Wh Depth of discharge: 90.00 % Voltage: V Continuous Discharge Rate (Normal Use): 2225 W Maximum Discharge Rate (5 Minutes): 4450 W Surge Discharge Rate (15 Seconds): 3000 W Maximum Charge Rate (5 Minutes): 4450 W

Read more less

Part No: GIV-BAT5.2 Storage Systems - Li-ion Battery Pack   GivEnergy 5.2 kWh Eco Li-Ion Battery State-Of-The-Art Management System  Features:  Using the latest LiFePO4 prismatic cell technology Plug & Play functionality Fully Recyclable at end of life Technical: Dual BMS system allowing greater control and functionality Scalable Battery Packs - Up to 5 per inverter in 2019 0.5C-1C charge and discharge rate 157Wh per Kg +/- 5% Supplier Part No: GIV-BAT5.2 Weight: 54 kg Battery Type: Lithium Ion Nominal Energy: 5200 Wh Depth of discharge: 80.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 2560 W Maximum Discharge Rate (5 Minutes): 2560 W Surge Discharge Rate (15 Seconds): 2560 W Maximum Charge Rate (5 Minutes): 2560 W

Read more less

Part No: FE-HV-EQM-4800 Storage Systems - Li-ion Battery Pack Fox ECS - High Voltage Battery (Master) EQ4800 4.66 kWh Capacity Scalable to 41.94 kWh  90% Depth of Discharge Large Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 9 modules in a stack (1x Master + 8x Slaves)   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: FE-HV-EQM-4800 Weight: 42 kg Rated Power: 4,800 W Battery Type: Lithium Ion Nominal Energy: 4660 Wh Depth of discharge: 90.00 % Voltage: V Continuous Discharge Rate (Normal Use): 2330 W Maximum Discharge Rate (5 Minutes): 4460 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4460 W

Read more less

Part No: BRACK-US3000 Storage Systems - Accessory   A set of battery brackets which allows vertical stacking of the Pylon battery unit. 1 set required per additional battery added. Supplier Part No: BW0PLUSUS3KAZJ01 Weight: 2.7 kg

Read more less

This part is a special offer made up of the following items: Part   1 x  GivEnergy All In One 6kW - 13.5 kW - NO GATEWAY   1 x  GivEnergy - All In One - Gateway ONLY The GivEnergy All In One AC coupled system has many advantages. With 7.2kW peak power, the charge and discharge rate of these batteries helps better take advantage of agile tariffs.  Alongside this, the system is complete with a substantial 13.5kWh useable battery pack and allows for 100% Depth of Discharge. Beyond the advantage of working with flexible rate tariffs, the All In One has an integrated LoRa to remove the need for long cable runs between the CT and the inverter by making this wireless and can provide whole house backup when paired with a GivEnergy Gateway. Furthermore, the All In One inverter is grid service ready meaning  that end users can take advantage when energy suppliers offer payments to reduce their electrical consumption at certain times.  Up to 6 systems can be connected in parallel, giving 80kWh of useable storage and the ability to deliver an enormous 30kW of power into the home. This features a modular design for ease of handling and installation by splitting into 5 x 30kg parts. AC attributes Max power: 7200W Max current: 32A Number of phases: 1 Battery Information Battery Voltage 260-346V Max Charge Current 25A Max Discharge Current  25A Battery Capacity 13.5kWh Max DoD  100% Communication CAN System Max efficiency 97% IP rating IP65 Weight 150kg Dimensions mm Key features Grid Service Ready Whole House Backup Works with flexible rate tariffs Scalable with a modular design

Read more less

Part No: FE-HV-ECS-2900-4A2C Storage Systems - Li-ion Battery Pack  Fox ECS - High Voltage Battery (Slave) ECS2900-V2 Connector A 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   If you are adding battery modules to a pre-existing Energy Cube stack, it’s important that the new batteries are compatible with your original battery modules.  Please contact your Technical person via the portal and provide a photograph of the original battery stack to help us determine correct compatibility. IMPORTANT REMINDER: When increasing the capacity of this battery stack, make sure the battery is the same connector type. We only stock the VERSION 2's of the ECS batteries. We stock both the and Connector type B variations. This is the Connector type A variation. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: FE-HV-ECS-2900-4A2C Weight: 35.2 kg Rated Power: 2,880 W Battery Type: Lithium Ion Nominal Energy: 2880 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 1440 W Maximum Discharge Rate (5 Minutes): 2880 W Surge Discharge Rate (15 Seconds): 3000 W Maximum Charge Rate (5 Minutes): 2880 W  

Read more less

Details INSTALLERS - ENSURE ADEQUATE CABLING AND CIRCUIT PROTECTION IS CONSIDERED WHEN USING MULTIPLE BATTERIES.  NOTE - YOU CANNOT MIX BATTERY TYPES. Sunsynk’s top-grade 5.32kWh Lithium-Ion Phosphate batteries (4.79kWh usable) have been engineered to the highest standard. They are capable of up to 90% depth of discharge and scalable with up to 32 units in parallel, allowing for a maximum of 170kWh per inverter.  Sunsynk BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward.  The battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. This allows the end user to utilise the full potential of our inverter and battery systems. **These batteries are supplied with medium length cables for parallel connections between batteries, as well as long length cables for battery to inverter connections.** WARNING NOTE - You cannot mix Sunsynk G5.3, BYD, CATL, IP20 or IP65 batteries in the same system.  

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 3 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 15kWh Battery Kit  Optional extra Floor Stand Optional extra top cover myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Part No: FE-HV-ECS-4100 Storage Systems - Li-ion Battery Pack Fox Energy Cube - High Voltage Battery (Slave) CLICK HERE FOR DATA SHEET ECS4100  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Supplier Part No: Energy Cube CS4100 Weight: 38.3 kg  

Read more less

This as a longer version of the Fox ESS HV2600 battery interlink cables. This is recommended when installing HV2600 batteries side by side using a wall mounted bracket and a longer cable is required to bridge the gap. Supplier Part No: 1M 2600 DC cable Weight: 1 kg  

Read more less

Part No: FE-HV-ECS-4300 Storage Systems - Li-ion Battery Pack Fox ECS - High Voltage Battery (Slave) ECS4300  4.14kWh Capacity Scalable to 29.03kWh  90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard.  This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   If you are adding battery modules to a pre-existing Energy Cube stack, it’s important that the new batteries are compatible with your original battery modules.  Please contact your Technical person via the portal and provide a photograph of the original battery stack to help us determine correct compatibility   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.  Supplier Part No: FE-HV-ECS-4300 Weight: 38.3 kg Rated Power: 4,300 W Battery Type: Lithium Ion Nominal Energy: 4145 Wh Depth of discharge: 90.00 % Voltage: 57 V Continuous Discharge Rate (Normal Use): 2875 W Maximum Discharge Rate (5 Minutes): 2875 W Surge Discharge Rate (15 Seconds): 3737 W Maximum Charge Rate (5 Minutes): 2875 W

Read more less

Part No: BRACK-US2000 Storage Systems - Accessory A set of battery brackets which allows vertical stacking of the Pylon battery unit. 1 set required per additional battery added. Supplier Part No: WJ0ZU2000B01 Weight: 2.36 kg  

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 2 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 10kWh Cable Expansion Kit Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

These cables are required for connection when installing multiple Polar ESS Battery storage systems in parallel.   5 Year warranty as standard, for all systems commissioned in May, June, and July 2024 System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE

Read more less

These cables are required for connection when installing the Polar ESS Inverter and Battery storage system.   System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE 

Read more less

Polar Foot Pack - 1 required for every single battery install   System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE 

Read more less

Part No: FE-HV-ECM-2900-4A2C Storage Systems - Li-ion Battery Pack Fox ECS - High Voltage Battery (Slave) ECS2900-V2 Connector A 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   If you are adding battery modules to a pre-existing Energy Cube stack, it’s important that the new batteries are compatible with your original battery modules.  Please contact your Technical person via the portal and provide a photograph of the original battery stack to help us determine correct compatibility. IMPORTANT REMINDER: When increasing the capacity of this battery stack, make sure the battery is the same connector type. We only stock the VERSION 2's of the ECS batteries. We stock both the Connector Type A  and Connector Type  B variations. This is the Connector Type A variation. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: FE-HV-ECM-2900-4A2C Weight: 37.95 kg Rated Power: 2,880 W Battery Type: Lithium Ion Nominal Energy: 2880 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 1440 W Maximum Discharge Rate (5 Minutes): 2880 W Surge Discharge Rate (15 Seconds): 3000 W Maximum Charge Rate (5 Minutes): 2880 W

Read more less

Please note: Only 1 or 2 Slave batteries can be used with 1x Master in a single-phase system (Maximum 3 batteries in total) and 1, 2 or 3 Slave batteries can be used with 1x Master in a three-phase system (Maximum 4 batteries in total).   Additional features: Scalable to 23.2kWh Up to 4kW charge/discharge High Voltage means thinner cables are required. Compact Design 100% Depth of discharge 6000 life cycles Easy installation – plug and play with all cables supplied Need more storage capacity? Take a look at the SOLAX BMS Parallel box for increased capacity. This product enables the installation of 2, 4, or 6 batteries in single-phase setups, and 4, 6, or 8 batteries in three-phase configurations, all without the need for a Master. This is a HV11550-58 Extension (Slave) Battery only, it requires HV-T-BAT-H-58 Main Battery(Master) to work and can only be matched with LFP 5.8kWh Master batteries.  Please note:  There are no compatibility issues between mixing the V1 and V2 generations of Solax batteries. In rare instances when an update is required, this may need to be done manually using a USB in cases where mixed versions are used. Supplier Part No: Triple Power 5.8kWh Slave V2 Weight: 72.2 kg Battery Type: Lithium Ion Nominal Energy: 5800 Wh Depth of discharge: 100.00 % Voltage: 115 V Continuous Discharge Rate (Normal Use): 2875 W Maximum Discharge Rate (5 Minutes): 4000 W Surge Discharge Rate (15 Seconds): 4000 W Maximum Charge Rate (5 Minutes): 4000 W

Read more less

Part No: FE-HV-ECM-2900 Storage Systems - Li-ion Battery Pack Fox Energy Cube - High Voltage Battery (Master) ECM2900  Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Supplier Part No: Energy Cube CM2900 Weight: 34.7 kg Battery Type: Lithium Ion Nominal Energy: 2880 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 1440 W Maximum Discharge Rate (5 Minutes): 2880 W Surge Discharge Rate (15 Seconds): 3000 W Maximum Charge Rate (5 Minutes): 2880 W  

Read more less

Part No: GIV-AIO-13.5 Storage Systems - Li-ion Battery Pack GivEnergy All In One Grid Services Ready Energy suppliers and aggregators are offering payments for end users that can reduce their electrical consumption at certain times. Whole House Backup  Whole house backup acts as a UPS in the event of power failure. This allows operation OFF grid until grid supply is restored. Backup Requires GIV-AIO-GATEWAY   Flexible Rate Tarif Charge the battery off peak where its cleaner, greener and less costly then discharge the battery during peak times for maximum saving   Effective May 1st, 2024, please note that the GIV-AIO-GATEWAY is now only required for home backup purposes. When installing without a Gateway please use GIV-GM120CT This energy is only required when installing without a gateway.    Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services   Supplier Part No: GIV-AIO-13.5-AC(5kW) Weight: 173.7 kg Battery Type: Lithium Ion Nominal Energy: 13500 Wh Depth of discharge: 100.00 % Voltage: 307 V Continuous Discharge Rate (Normal Use): 7675 W Maximum Discharge Rate (5 Minutes): 7675 W Surge Discharge Rate (15 Seconds): 7675 W Maximum Charge Rate (5 Minutes): 7675 W

Read more less

Part No: GIV-AIO-GATEWAY Storage Systems - Accessory GivEnergy - All In One - Gateway By purchasing the additional Giv-Gateway, the All in One can provide whole house backup in the event of a power failure. The Giv-Gateway provides seamless switching between grid and battery ensuring that your property is always powered. Giv-Gateway also facilitates a connection point for your solar PV system by allowing it to continue to generate energy even without a grid supply Grid Services Ready Energy suppliers and aggregators are offering payments for end users that can reduce their electrical consumption at certain times. Pre-Installed EM115 Meter Quicker and simpler system installation, which reduces the number of individual mounted components needed 20ms Switchover Time Uniterrupted supply in the event of a power failure, to ensure all critical loads are stable. Built-In LoRa Uses Radio frequency to transmit the Grid meter data back to the inverter, which allows the system to be installed remotely without a cable.   Note: The AIO Gateways come populated as standard with a Type AC RCBO, 32A.  It is the responsibility of the installer to ensure that the installation complies with BS7671 This product requires main AIO unit GIV-AIO-13.5 or GIV-AIO-AC-3.6-13.5 to work.

Read more less

Part No: FE-HV-EC-A-3-2.9-8.7 Storage Systems - Li-ion Battery Pack ECS 2.9kWh CONNECTOR TYPE A - Stack of 3 (8.64kWh Useable Storage) Incl. Master ECM2900-4A2C 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM2900 battery modules to be added post installation. Weight: 99.5kg Dimensions (Width, Hight, Depth): 570mm x 470mm x 380mm  Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves).   IMPORTANT REMINDER: When increasing the capacity of this battery stack, make sure the battery is the same connector type. We only stock the VERSION 2's of the ECS batteries. We stock both the Connector type A  and Connector type B variations. Weight: 108.35 kg Battery Type: Lithium Ion Nominal Energy: 8640 Wh Depth of discharge: 90.00 % Voltage: 172 V Continuous Discharge Rate (Normal Use): 8640 W Maximum Discharge Rate (5 Minutes): 8640 W Surge Discharge Rate (15 Seconds): 11232 W Maximum Charge Rate (5 Minutes): 8640 W

Read more less

4.14kWh Capacity Scalable to 29.03Wh  90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage  Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   If you are adding battery modules to a pre-existing Energy Cube stack, it’s important that the new batteries are compatible with your original battery modules.  Please contact your Technical person via the portal and provide a photograph of the original battery stack to help us determine correct compatibility   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Supplier Part No: FE-HV-ECM-4300 Weight: 38.3 kg Rated Power: 4,300 W Battery Type: Lithium Ion Nominal Energy: 4145 Wh Depth of discharge: 90.00 % Voltage: 57 V Continuous Discharge Rate (Normal Use): 2875 W Maximum Discharge Rate (5 Minutes): 2875 W Surge Discharge Rate (15 Seconds): 3737 W Maximum Charge Rate (5 Minutes): 2875 W

Read more less

Part No: PYL-F-H2-BATT-96V Storage Systems - Li-ion Battery Pack Flexible Module Design Reliable Performance 90% DoD with more usable capacity IP 55 class protection To extend the warranty from 3 to 10 years you have to register here: http://en.pylontech.com.cn/service/support. Important MAX DISCHARGE RATE IS ONLY APPLICABLE FOR +- 60 SECONDS Please ensure that you check the inverter settings are below the maximum allowed voltage BEFORE plugging in the UTILITY/SOLAR to the inverter.

Read more less

Part No: FE-LV52 Storage Systems - Li-ion Battery Pack Fox LV52 90% Depth of Discharge Wide Temperature Tolerance Easy Installation ≥6000 Life Cycles CAN/RS485 Communication Low Voltage Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. The LV52 and the LV54 ARE compatible with eachother. When installing 2-4 batteries,  two combiner box's will be required. The LV52 is not compatible with the LV5200 Please note: The CAN cable currently shipped with the Fox ESS LV54 battery is made-up at one end only (the battery end). The Installer will need to make up the cable at the inverter end. Pending Documents: Warranty. Supplier Part No: LV52 Weight: 54 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 90.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5120 W Maximum Discharge Rate (5 Minutes): 5120 W Surge Discharge Rate (15 Seconds): 7500 W Maximum Charge Rate (5 Minutes): 5120 W

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack It has 100% DoD, with 5.12kW max discharge power, a long-life span with a standard 5-year product warranty. Additional features:  Up to 16 units with the same firmware can be paralleled  IP rating 40  Self-monitoring function to detect abnormalities  Excellent thermal stability  Brackets not included; use these - SUN-WALL-BR Please note: These batteries contain CATL cells and are not intercompatible    Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 1 x 5kWh Libbi Home Battery 1 x Libbi Cable Expansion Kit for 5kWh 1 x Myenergi Controller Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Part No: FE-HV-EC-7-4.3-30.1 Storage Systems - Li-ion Battery Pack Fox ECS 4.3kWh - Full Stack of 7 (29.03kWh) Incl. Master ECM4300 4.14kWh Capacity Scalable to 29.03kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM4300 battery modules to be added post installation. Weight: 257.4kg Dimensions (Width, Hight, Depth): 570mm x 950mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves) Weight: 268.1 kg Battery Type: Lithium Ion Nominal Energy: 29030 Wh Depth of discharge: 90.00 % Voltage: 403 V Continuous Discharge Rate (Normal Use): 20160 W Maximum Discharge Rate (5 Minutes): 20160 W Surge Discharge Rate (15 Seconds): 26208 W Maximum Charge Rate (5 Minutes): 20160 W  

Read more less

This Kit Includes: 1 x 3.68kW Libbi Inverter 3 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 15kWh Battery Connection Kit Optional extra Floor Stand Optional extra top cover myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information.   UK & EU Only - These batteries no longer include mounting brackets and these must be purchased separately UK & EU Only - FE-HV-BMS-V2 is compatible with both current and new HV2600 (FE-HV2600 & FE-HV2600-V2) UK & EU Only - FE-HV2600-V2 is NOT compatible with current BMS and AIO Inverters part numbers: FE-HV-BMS, FE-AIO-H1-3.7-E, FE-AIO-H1-5.0-E, FE-AIO-H3-6.0-E, FE-AIO-H3-8.0-E, FE-AIO-H3-10.0-E This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: H2600-V2 (HV 2.6kWh) Battery Weight: 30 kg Battery Type: Lithium Ion Nominal Energy: 2560 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 2560 W Maximum Discharge Rate (5 Minutes): 3000 W Surge Discharge Rate (15 Seconds): 3600 W Maximum Charge Rate (5 Minutes): 2560 W

Read more less

Part No: FE-HV-EC-4-4.8-19.2 Storage Systems - Li-ion Battery Pack Fox ECS 4.74kWh - Stack of 4 (18.64kWh Useable Storage) Incl. Master ECM4800-2H 4.74kWh Capacity Scalable to 33.2kWh  90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM4800-2H battery modules to be added post installation. Weight: 160kg Dimensions (Width, Hight, Depth): 570mm x 662mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard.  This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)   To work with the H3/AC3 range of inverters, there is a minimum battery stack requirement of 5 so that it is within the voltage range.  Weight: 158.5 kg Battery Type: Lithium Ion Nominal Energy: 18640 Wh Depth of discharge: 90.00 % Voltage: 179 V Continuous Discharge Rate (Normal Use): 4480 W Maximum Discharge Rate (5 Minutes): 8960 W Surge Discharge Rate (15 Seconds): 11648 W Maximum Charge Rate (5 Minutes): 8960 W

Read more less

Beyond the advantage of working with flexible rate tariffs, the All In One inverter is grid service ready meaning  that end users can take advantage when energy suppliers offer payments to reduce their electrical consumption at certain times.  If being installed without the Giv Gateway the Givenergy GEM120CT Programmable Modbus Energy Meter 1ph 1m should be purchased for import and export readings that are required for battery operation. This is the ID1 meter. You will also need an additional GEM120 meter to measure the PV generation if there is solar. This is the ID2 meter.

Read more less

Details The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation.The dedicated Sunsynk Connect Platform enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system.From the pre-set factory settings to the in-built connection ports, the Sunsynk Lifelynk X 3.6kW SUN-LIFE3.6X-HYB Hybrid Inverter has been designed with convenience and hassle-free installation in mind. Features: Small and Mighty - An ideal solution for smaller properties, social housing and local government projects Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit EPS Function - Includes option for 3.6kw Output for Essential Loads Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket Plug and Play - Get up and running quickly Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind Maximum Power Output - 3600w Dimensions - 700.6 x 534.6 x 182.2mm Weight - 57.4kg This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too.

Read more less

Part No: FE-HV-ECM-4100 Storage Systems - Li-ion Battery Pack Fox Energy Cube - High Voltage Battery (Master) ECM4100  4.03kWh Capacity Scalable to 28.21kWh  90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage   This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems. Supplier Part No: Energy Cube CM4100 Weight: 38.3 kg Battery Type: Lithium Ion Nominal Energy: 4050 Wh Depth of discharge: 90.00 % Voltage: 52 V Continuous Discharge Rate (Normal Use): 2875 W Maximum Discharge Rate (5 Minutes): 2875 W Surge Discharge Rate (15 Seconds): 2875 W Maximum Charge Rate (5 Minutes): 2875 W  

Read more less

Part No: SE-BATTERY02-10KWH Storage Systems - Li-ion Battery PackBAT-10K1PS0B-02 Compatible with all models of SolarEdge single phase HD wave inverters including both Home wave and Home hub. Integrates with the complete SolarEdge residential offering, providing a single point of contact for warranty, support, training, and simplified logistics & operations. NMC 9.7kWh / 5kW Li-ion technology DC coupling Support up to 3 batteries per inverter for more power and capacity 100% depth of discharge Superior system efficiency (PV> Battery> Grid) Simple installation with plug & play: Floor mounting or wall mounting Automatic configuration with pre-defined settings All SolarEdge solutions are managed by a single APP to optimize production, consumption and stored energy Through improvements in its mechanical design, SolarEdge were able to design their new battery to certify with the UL9540A standard, on top of the existing IEC62619 EU, making it one of the first residential batteries to meet the strictest standards for fire safety hazards. The installation has been simplified and the package no longer contains a fire extinguisher. Please refer to the other parts section and review any other products you may require for this installation. Please contact us if you have any questions. Please note installers must be trained and certified in order to install this battery. Installer certification course is available in the Solar Edge Edge Academy.   Supplier Part No: BAT-10K1PS0B-02 Weight: 120 kg Battery Type: Lithium Ion Nominal Energy: 9700 Wh Depth of discharge: 100.00 % Voltage: 400 V Continuous Discharge Rate (Normal Use): 5000 W Maxi um Discharge Rate (5 Minutes): 5000 W Surge Discharge Rate (15 Seconds): 7500 W Maximum Charge Rate (5 Minutes): 5000 W Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. 

Read more less

Part No: GIV-BAT-ECO2.6 Storage Systems - Li-ion Battery Pack   GivEnergy 2.6 kWh Eco Li-Ion Battery State-Of-The-Art Management System  Features:  Using the latest LiFePO4 prismatic cell technology Plug & Play functionality Fully Recyclable at end of life   Technical: Dual BMS system allowing greater control and functionality Scalable Battery Packs - Up to 5 per inverter in 2019 0.5C-1C charge and discharge rate 157Wh per Kg +/- 5%   Please Note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID Supplier Part No: 2.6kWh eco Weight: 36 kg Battery Type: Lithium Ion Nominal Energy: 2600 Wh Depth of discharge: 90.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 2400 W Surge Discharge Rate (15 Seconds): 2400 W Maximum Charge Rate (5 Minutes): 2400 W  

Read more less

This Kit Includes: 1 x 3.68kW Libbi Inverter 2 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 10kWh Cable Expansion Kit Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Part No: GIV-BAT-9.5-G3 Storage Systems - Li-ion Battery Pack GivEnergy 9.5kWh Li-Ion Battery Gen 3  Newest iteration of the 9.5kWh LiFePO4  battery from GivEnergy with an impressive cost/ kWh and a 99% battery recyclability.    Features: IP65 rating  Retrofit compatability  12 year manufacturers warranty remote firmware upgrades Technical:  100% Depth of discharge 9.5kWh capacity  Dimensions : 576 x 225 x 480mm  Voltage 51.2V 80A Current 85 kg weight Max discharge/charge current :120A Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services

Read more less

GIV-SME-AIO-ID Brochure DataSheet The Commercial All-In-One (AIO) comprises of a 69kWh battery system with a 30kW high frequency PCS (Inverter) built in within a cabinet creating a small to medium enterprise energy storage system. The commercial All in One is GivEnergy's most compact, cost-effective commercial battery storage solution. So, your energy needs are met with a single, sleek piece of kit. The 30kW 69kWh Commercial All-In One Inverter is scalabale from 1 to 6 units with a max size of 180kW and 207kWh. Features: Out-of-the-box convenience - Comes to you as a ready-to-go, turnkey solution that can be quickly and easily installed on site using plug and play battery packs. A true cost and space saver - By integrating all needed components into a single unit, the system represents maximum value, at a minimal size and price. Built-in safety - Every practical protection has been built-in to the system. It’s reliable, rock-solid, and rigorously safety-checked. Simple & user-friendly - Effortless operation, simple plug and play installation, plus easy cloud control. There’s no simpler way to get started with commercial battery storage. 10 Year Warranty Battery Information Battery Voltage 600-790V Battery Capacity 69kWh Max DoD 90% Communication LAN/WiFi Modbus CANbus AC attributes Rated power: 30kW Rated current: 44A Number of phases:   3 System Max efficiency 98.8% IP rating IP20 Weight 950kg +/-2% Dimensions 2050 x 600 x 800mm

Read more less

Part No: GIV-BAT-5.1-G3 Storage Systems - Li-ion Battery Pack GivEnergy 5.12 kWh Eco Li-Ion Battery State-of-the-Art Management System  The newly 5.12kWh battery pack is our most new released versatile battery. Comes with smaller size and higher capacity, it can be installed in a wider range of locations due to its compact design and can either be wall mounted or floor stood. The battery chemistry does not contain any Cobalt, making it non-flammable and the battery pack is 99% recyclable Features:  Using the latest LiFePO4 prismatic cell technology Robust Multi Point Monitoring BMS Pre Installed Technical: 5120Wh/100Ah capacity  100% DoD 57.6V max charging voltage  60A max charge/discharge current  12 years warranty Please note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID!   Supplier Part No: GIV-BAT5.12 G3 Weight: 48 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 3072 W Maximum Discharge Rate (5 Minutes): 3072 W Surge Discharge Rate (15 Seconds): 3072 W Maximum Charge Rate (5 Minutes): 3072 W

Read more less