Features

Remote Monitoring and Control

Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm

Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Optional external battery voltage, temperature and current sensing via Bluetooth

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.

Synchronized parallel charging with Bluetooth

Up to 10 units can be synchronized with Bluetooth.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

VE.Direct

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Remote on-off

To connect for example to a VE.BUS BMS.

Programmable relay

Can be programmed to trip on an alarm, or other events.

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Brand	Victron Energy
Manufacturer Part Number	SCC115070211
GTIN	8719076051404
Battery Voltage	12/24/48V Auto Select (software tool needed to select 36V)
Rated Charge Current	70A
Nominal PV Power, 12V	1000W
Nominal PV Power, 24V	2000W
Max. PV Short Circuit Current	50A
Maximum PV Open Circuit Voltage	150V absolute maximum coldest conditions 145V start-up and operating maximum
Efficiency	98%
Charge Algorithm	Multi-stage adaptive (eight preprorammed algorithms) or user defined algorithm
Data Communication Port	VE.Direct
IP Rating	IP43 (electronic components), IP22 (connection area)
Dimensions	H185 x W250 x D95mm
Weight	3Kg
Warranty	5 Years

Brand	CTEK
Charge Voltage	12 V
Charge Rate	10 A
12V Charge Capacity (up to)	20 Ah - 200 Ah
Trickle Charge	20 Ah - 300 Ah
Guarantee	2 Years
Barcode (EAN)	7350009568180

Brand	CTEK
Charge Voltage	12 V
Charge Rate	10 A
12V Charge Capacity (up to)	20 Ah - 200 Ah
Trickle Charge	20 Ah - 300 Ah
Guarantee	2 Years
Barcode (EAN)	7350009568180