Part No: PYLON-US5000-1C Storage Systems - Li-ion Battery Pack Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 7-year warranty extendable to 10 if registered online, using the link below. Long cycle life and superior performance Compatible with tier 1 inverter brands To get the full 10 year warranty (3 years extra) you have to register here: http://en.pylontech.com.cn/service/support. Supplier Part No: US5000 1C Weight: 40.4 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W
£874.16 Exc. VAT
£1,048.99 Inc. VAT
Part No: KETO-00 Storage Systems - Battery Fuse Holder Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety. Keto size 00 Maximum DC current = 160A DC voltage rating: 440V Overall width: 106mm System size: 195mm Terminals: M8 lugs with cable area from 25-95mm2 Wall mountable. The Keto-00 needs two fuses at the appropriate rating to be added. Size these based on the maximum battery current with a safety factor applied. Supplier Code: T500113002 Supplier Part No: T500113002 Weight: 0.73 kg Data Sheet NH Fuse Link (English, German)
£25.00 Exc. VAT
£30.00 Inc. VAT
Part No: SE-FLRSTD-4.6 Storage Systems - Battery Rack Floor stand kit for SolarEdge Energy Bank (SE-BATTERY-4.6KWH) to allow floor mounting of the battery. Supplier Part No: IAC-RBAT-5KFSTD-01 Weight: 18 kg
£103.72 Exc. VAT
£124.46 Inc. VAT
This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems.
£686.72 Exc. VAT
£824.06 Inc. VAT
BMS unit for Powercube H2 batteries Comes with 1 x Orange Power Cable 160mm and 1 x Black Power cable 2000mm This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems.
£597.14 Exc. VAT
£716.57 Inc. VAT
Part No: GIV-BAT-5.1-G3 Storage Systems - Li-ion Battery Pack GivEnergy 5.12 kWh Eco Li-Ion Battery State-of-the-Art Management System The newly 5.12kWh battery pack is our most new released versatile battery. Comes with smaller size and higher capacity, it can be installed in a wider range of locations due to its compact design and can either be wall mounted or floor stood. The battery chemistry does not contain any Cobalt, making it non-flammable and the battery pack is 99% recyclable Features: Using the latest LiFePO4 prismatic cell technology Robust Multi Point Monitoring BMS Pre Installed Technical: 5120Wh/100Ah capacity 100% DoD 57.6V max charging voltage 60A max charge/discharge current 12 years warranty Please note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details. If fitted by non-trained installer the Warranty will be VOID! Supplier Part No: GIV-BAT5.12 G3 Weight: 48 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 3072 W Maximum Discharge Rate (5 Minutes): 3072 W Surge Discharge Rate (15 Seconds): 3072 W Maximum Charge Rate (5 Minutes): 3072 W
£1,662.00 Exc. VAT
£1,994.40 Inc. VAT
Part No: SE-3680H-NET-RWS Storage Systems - Hybrid Inverter Single phase hybrid inverter with a rated AC output of 3.68kW. This inverter is compatible with high voltage LG Chem RESU batteries. The inverter controls, manages and optimizes the power flow from the PV, battery and grid sources. Supplier Part No: SE3680H-RWS00BEO4 Weight: 10 kg Rated Power: 3,680 W Min PPT Voltage: 380 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 5,700 W Max AC Power (5 Minutes): 3,681 W Surge AC Power (1 Second): 3,682 W Max DC Current: 10.5 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 98.8 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 12 years
£578.41 Exc. VAT
£694.09 Inc. VAT
Part No: PYL-PC-H2-BATT Storage Systems - Li-ion Battery Pack Powercube series products with its modular design concept, enables the highest flexibility both for rack mounted and container based constructions, giving the flexibilities for customer to deploy the system. Configurable from units of 5 - 12 modules per system, the system can supply 240 - 864V for high Voltage applications. Product features -Modular and Scalable 5 – 12 modules per rack and up to 6 racks in series -Flexible BMS voltage range From 240VDC to 864VDC -LiFePO4 technology For safety and long cycle life -High System Safety BMS has charge, current and temperature protection -Flexible configuration options Rack mounted or container-based systems Each Battery module comes with 1 x Communication Cable and 1 x Orange Power Cable NB. Please note: A BMS unit and external cable kit is required for each individual stack of batteries. A minimum of 5x battery modules is required for BMS operation. For installations with two BMS units and more an MBMS is required. You can register the Pylon Powercube for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the 'sign up battery' page. Supplier Part No: H48074NA01V00101 Weight: 30 kg Battery Type: Lithium Ion Nominal Energy: 3552 Wh Depth of discharge: 90.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 1776 W Maximum Discharge Rate (5 Minutes): 3552 W Surge Discharge Rate (15 Seconds): 3552 W Maximum Charge Rate (5 Minutes): 3552 W Data Sheet Powercube H2
£597.14 Exc. VAT
£716.57 Inc. VAT
Part No: SE-6000H-NET-DT Storage Systems - Hybrid Inverter This part is made up of the following items: 1 x SE-6000H-NET 6,000W Home Wave Inverter - Single Phase SolarEdge Home Wave Inverter- Network Ready Optimized installation with HD-Wave technology Features: Specifically designed to work with SolarEdge Power Optimizers Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Industry leading efficiency with 200% DC oversizing Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings Advanced safety feature - integrated arc fault protection Price reduced from £966.83 on 12/11/2024 Weight:10.6 kgRated Power:6,000 WMin PPT Voltage:380 VMax PPT Voltage:480 VDC Startup Voltage:0 VDC Shutdown Voltage:0 VMax Input Voltage:480 VMax DC Power:12,000 WMax AC Power (5 Minutes):6,000 WSurge AC Power (1 Second):6,000 WMax DC Current:16.5 AMax DC Inputs:2Has DC Fuses:0Connector:MC4 Included Connectors:4Euro Efficiency:99 %Transformer:NoneMPPT Quantity :2Has Integrated DC Switch:YesWarranty:12 years
£683.78 Exc. VAT
£820.54 Inc. VAT
Part No: GIV-BAT-9.5-G3 Storage Systems - Li-ion Battery Pack GivEnergy 9.5kWh Li-Ion Battery Gen 3 Newest iteration of the 9.5kWh LiFePO4 battery from GivEnergy with an impressive cost/ kWh and a 99% battery recyclability. Features: IP65 rating Retrofit compatability 12 year manufacturers warranty remote firmware upgrades Technical: 100% Depth of discharge 9.5kWh capacity Dimensions : 576 x 225 x 480mm Voltage 51.2V 80A Current 85 kg weight Max discharge/charge current :120A Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details. If fitted by non-trained installer the Warranty will be VOID! Givenergy system must be connected to the internet to benefit from full warranty services
£3,352.12 Exc. VAT
£4,022.54 Inc. VAT
Commissioning by GivEnergy is included Mainland UK. The GivPCS 30kW controller with scalable 69kWh battery options, is a small to medium enterprise energy storage system. The use of modular battery packs (9.6kWh each) that use the latest in LiFePO4 prismatic cell technology with a plug and play design make scaling the system to the perfect capacity simple. For larger projects up to 4 battery racks (69 kWh each) can be added the the system, giving a total combined capacity of 276 kWh. Features: Flexible Control - System can be controlled and monitored via GivEnergy cloud or via external signal. Adjustable Power Rating - EMS allows control of charge and discharge rates. Industrial & Commercial - Suitable instalation for a wide range of applications. Modular Design - Multiple units can be installed in parallel. The system can be monitored and controlled using the energy management system (EMS) on the GivEnergy platform with additional monitoring points available to integrate to give more specific data e.g. renewable energy generation on site. Bespoke software modification available on request - please get in touch for prices. DC (Battery) Battery Voltage range: 300 - 850V Max current: CommunicationBMS InterfaceDevice Interface 43A RS485/CANRS485, TCP/IP AC (On-grid) Max. Output Power: 33kVA Rated Power: 30KW Rated Voltage: 400V Voltage Range: 320V - 460V Rated Current: 43A Max. Output Current:Rated Frequency:THDI:PF: 48A50 / 60Hz<3%1 lagging - 1 leading AC (Off-grid) Rated Voltage: 400V Rated Frequency: 50 / 60Hz Overload Capability: 110%-continuous General Information Efficiency - 96.3% Weight - 600Kg Dimensions - 800 x 800 x 2050 (mm) Protection Degree - IP21 This product does not have G99 certification without a dedicated G99 protection relay, that can be made part of the installation costs.
£122,092.00 Exc. VAT
£146,510.40 Inc. VAT
Commissioning by GivEnergy is included Mainland UK. The GivPCS 30kW controller with scalable 69kWh battery options, is a small to medium enterprise energy storage system. The use of modular battery packs (9.6kWh each) that use the latest in LiFePO4 prismatic cell technology with a plug and play design make scaling the system to the perfect capacity simple. For larger projects up to 4 battery racks (69 kWh each) can be added the the system, giving a total combined capacity of 276 kWh. Features: Flexible Control - System can be controlled and monitored via GivEnergy cloud or via external signal. Adjustable Power Rating - EMS allows control of charge and discharge rates. Industrial & Commercial - Suitable instalation for a wide range of applications. Modular Design - Multiple units can be installed in parallel. The system can be monitored and controlled using the energy management system (EMS) on the GivEnergy platform with additional monitoring points available to integrate to give more specific data e.g. renewable energy generation on site. Bespoke software modification available on request - please get in touch for prices. DC (Battery) Battery Voltage range: 300 - 850V Max current: CommunicationBMS InterfaceDevice Interface 43A RS485/CANRS485, TCP/IP AC (On-grid) Max. Output Power: 33kVA Rated Power: 30KW Rated Voltage: 400V Voltage Range: 320V - 460V Rated Current: 43A Max. Output Current:Rated Frequency:THDI:PF: 48A50 / 60Hz<3%1 lagging - 1 leading AC (Off-grid) Rated Voltage: 400V Rated Frequency: 50 / 60Hz Overload Capability: 110%-continuous General Information Efficiency - 96.3% Weight - 600Kg Dimensions - 800 x 800 x 2050 (mm) Protection Degree - IP21 This product does not have G99 certification without a dedicated G99 protection relay, that can be made part of the installation costs.
£92,199.00 Exc. VAT
£110,638.80 Inc. VAT
Commissioning by GivEnergy is included Mainland UK. The GivPCS 30kW controller with scalable 69kWh battery options, is a small to medium enterprise energy storage system. The use of modular battery packs (9.6kWh each) that use the latest in LiFePO4 prismatic cell technology with a plug and play design make scaling the system to the perfect capacity simple. For larger projects up to 4 battery racks (69 kWh each) can be added the the system, giving a total combined capacity of 276 kWh. Features: Flexible Control - System can be controlled and monitored via GivEnergy cloud or via external signal. Adjustable Power Rating - EMS allows control of charge and discharge rates. Industrial & Commercial - Suitable instalation for a wide range of applications. Modular Design - Multiple units can be installed in parallel. The system can be monitored and controlled using the energy management system (EMS) on the GivEnergy platform with additional monitoring points available to integrate to give more specific data e.g. renewable energy generation on site. Bespoke software modification available on request - please get in touch for prices. DC (Battery) Battery Voltage range: 300 - 850V Max current: CommunicationBMS InterfaceDevice Interface 43A RS485/CANRS485, TCP/IP AC (On-grid) Max. Output Power: 33kVA Rated Power: 30KW Rated Voltage: 400V Voltage Range: 320V - 460V Rated Current: 43A Max. Output Current:Rated Frequency:THDI:PF: 48A50 / 60Hz<3%1 lagging - 1 leading AC (Off-grid) Rated Voltage: 400V Rated Frequency: 50 / 60Hz Overload Capability: 110%-continuous General Information Efficiency - 96.3% Weight - 600Kg Dimensions - 800 x 800 x 2050 (mm) Protection Degree - IP21 This product does not have G99 certification without a dedicated G99 protection relay, that can be made part of the installation costs.
£68,750.00 Exc. VAT
£82,500.00 Inc. VAT
Commissioning by GivEnergy is included Mainland UK. The GivPCS 30kW controller with scalable 69kWh battery options, is a small to medium enterprise energy storage system. The use of modular battery packs (9.6kWh each) that use the latest in LiFePO4 prismatic cell technology with a plug and play design make scaling the system to the perfect capacity simple. For larger projects up to 4 battery racks (69 kWh each) can be added the the system, giving a total combined capacity of 276 kWh. Features: Flexible Control - System can be controlled and monitored via GivEnergy cloud or via external signal. Adjustable Power Rating - EMS allows control of charge and discharge rates. Industrial & Commercial - Suitable instalation for a wide range of applications. Modular Design - Multiple units can be installed in parallel. The system can be monitored and controlled using the energy management system (EMS) on the GivEnergy platform with additional monitoring points available to integrate to give more specific data e.g. renewable energy generation on site. Bespoke software modification available on request - please get in touch for prices. DC (Battery) Battery Voltage range: 300 - 850V Max current: CommunicationBMS InterfaceDevice Interface 43A RS485/CANRS485, TCP/IP AC (On-grid) Max. Output Power: 33kVA Rated Power: 30KW Rated Voltage: 400V Voltage Range: 320V - 460V Rated Current: 43A Max. Output Current:Rated Frequency:THDI:PF: 48A50 / 60Hz<3%1 lagging - 1 leading AC (Off-grid) Rated Voltage: 400V Rated Frequency: 50 / 60Hz Overload Capability: 110%-continuous General Information Efficiency - 96.3% Weight - 600Kg Dimensions - 800 x 800 x 2050 (mm) Protection Degree - IP21 This product does not have G99 certification without a dedicated G99 protection relay, that can be made part of the installation costs.
£34,950.00 Exc. VAT
£41,940.00 Inc. VAT
GIV-SME-AIO-ID Brochure DataSheet The Commercial All-In-One (AIO) comprises of a 69kWh battery system with a 30kW high frequency PCS (Inverter) built in within a cabinet creating a small to medium enterprise energy storage system. The commercial All in One is GivEnergy's most compact, cost-effective commercial battery storage solution. So, your energy needs are met with a single, sleek piece of kit. The 30kW 69kWh Commercial All-In One Inverter is scalabale from 1 to 6 units with a max size of 180kW and 207kWh. Features: Out-of-the-box convenience - Comes to you as a ready-to-go, turnkey solution that can be quickly and easily installed on site using plug and play battery packs. A true cost and space saver - By integrating all needed components into a single unit, the system represents maximum value, at a minimal size and price. Built-in safety - Every practical protection has been built-in to the system. It’s reliable, rock-solid, and rigorously safety-checked. Simple & user-friendly - Effortless operation, simple plug and play installation, plus easy cloud control. There’s no simpler way to get started with commercial battery storage. 10 Year Warranty Battery Information Battery Voltage 600-790V Battery Capacity 69kWh Max DoD 90% Communication LAN/WiFi Modbus CANbus AC attributes Rated power: 30kW Rated current: 44A Number of phases: 3 System Max efficiency 98.8% IP rating IP20 Weight 950kg +/-2% Dimensions 2050 x 600 x 800mm
£19,950.00 Exc. VAT
£23,940.00 Inc. VAT
Part No: FE-H3-PRO-30.0-ECS4300-WG Special Offers - PV and Storage Package This part is made up of the following items: 6 x FE-HV-ECS-4300 Fox ECS 4.14kWh HV Battery (Slave) 1 x FE-H3-PRO-30.0 Fox ESS H3 Pro 30kW 3PH Hybrid Inverter 1 x FE-HV-ECM-4300 Fox ECS 4.14kWh HV Battery (Master) Weight: 325.6 kg
£9,623.41 Exc. VAT
£11,548.09 Inc. VAT
Part No: FE-H3-PRO-25.0-ECS4300-WG Special Offers - PV and Storage Package This part is made up of the following items: 6 x FE-HV-ECS-4300 Fox ECS 4.14kWh HV Battery (Slave) 1 x FE-H3-PRO-25.0 Fox ESS H3 Pro 25kW 3PH Hybrid Inverter 1 x FE-HV-ECM-4300 Fox ECS 4.14kWh HV Battery (Master) Weight: 325.6 kg
£9,357.45 Exc. VAT
£11,228.94 Inc. VAT
Part No: FE-H3-PRO-20.0-ECS4300-WG Special Offers - PV and Storage Package This part is made up of the following items: 6 x FE-HV-ECS-4300 Fox ECS 4.14kWh HV Battery (Slave) 1 x FE-H3-PRO-20.0 Fox ESS H3 Pro 20kW 3PH Hybrid Inverter 1 x FE-HV-ECM-4300 Fox ECS 4.14kWh HV Battery (Master) Weight: 320.6 kg
£9,101.70 Exc. VAT
£10,922.04 Inc. VAT
Part No: SE-10000H-3PH-BAT4.6-RWB-5 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 5 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-10000-3PH-RWB SolarEdge 10,000W Home Hub 48V - Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 3 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 10kW 3PH Hybrid RWB + 5 x 4.6kWh (23kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Optional Related Product (1 Floorstand per Tower): Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery. Weight: 315.18 kg
£14,725.00 Exc. VAT
£17,670.00 Inc. VAT
Part No: SE-8000H-3PH-BAT4.6-RWB-5 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 5 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-8000-3PH-RWB SolarEdge 8,000W Home Hub 48V - Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 3 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 8kW 3PH Hybrid RWB + 5 x 4.6kWh (23kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Optional Related Product (1 Floorstand per Tower): Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery Weight: 315.18 kg
£14,600.00 Exc. VAT
£17,520.00 Inc. VAT
Part No: SE-5000H-3PH-BAT4.6-RWB-5 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 5 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-5000-3PH-RWB SolarEdge 5,000W Home Hub Inverter Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 3 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 5kW 3PH Hybrid RWB + 5 x 4.6kWh (23kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Optional Related Product (1 Floorstand per Tower): Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery Weight: 315.18 kg
£13,900.00 Exc. VAT
£16,680.00 Inc. VAT
Part No: SE-10000H-3PH-BAT4.6-RWB-4 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 4 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-10000-3PH-RWB SolarEdge 10,000W Home Hub 48V - Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 10kW 3PH Hybrid RWB + 4 x 4.6kWh (18.4kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Optional Related Product (1 Floorstand per Tower): Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery. Weight: 260.98 kg
£12,350.00 Exc. VAT
£14,820.00 Inc. VAT
Part No: SE-8000H-3PH-BAT4.6-RWB-4 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 4 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-8000-3PH-RWB SolarEdge 8,000W Home Hub 48V - Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 8kW 3PH Hybrid RWB + 4 x 4.6kWh (18.4kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Optional Related Product (1 Floor stand per Tower): Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery. Weight: 260.98 kg
£12,244.00 Exc. VAT
£14,692.80 Inc. VAT
Part No: SE-5000H-3PH-BAT4.6-RWB-4 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 4 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-5000-3PH-RWB SolarEdge 5,000W Home Hub Inverter Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 5kW 3PH Hybrid RWB + 4 x 4.6kWh (18.4kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Weight: 260.98 kg
£12,025.00 Exc. VAT
£14,430.00 Inc. VAT
Part No: SE-10000H-3PH-BAT4.6-RWB-3 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 3 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-10000-3PH-RWB SolarEdge 10,000W Home Hub 48V - Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 10kW 3PH Hybrid RWB + 3 x 4.6kWh (13.8kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Weight: 203.78 kg
£9,849.00 Exc. VAT
£11,818.80 Inc. VAT
Part No: SE-8000H-3PH-BAT4.6-RWB-3 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 3 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-8000-3PH-RWB SolarEdge 8,000W Home Hub 48V - Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 8kW 3PH Hybrid RWB + 3 x 4.6kWh (13.8kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Weight: 203.78 kg
£9,740.00 Exc. VAT
£11,688.00 Inc. VAT
Part No: SE-5000H-3PH-BAT4.6-RWB-3 Storage Systems - Self Consumption Packages This part is a special offer made up of the following items: Part 3 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module 1 x SE-5000-3PH-RWB SolarEdge 5,000W Home Hub Inverter Three Phase with Backup Potential 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V 1 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) SolarEdge 3PH HOME Hub w.Backup Potential Package- 5kW 3PH Hybrid RWB + 3 x 4.6kWh (13.8kWh) Doesn't include the SolarEdge Backup Interface. SE-SBI-3PH Weight: 203.78 kg
£9,522.00 Exc. VAT
£11,426.40 Inc. VAT
Part No: SE-10000H-BATT02-10KWH-RWB Special Offers - Storage Package This part is a special offer made up of the following items: Part 1 x SE-BATTERY02-10KWH SolarEdge Home Battery - 1PH 400V 9.7kWh Battery v02 1 x SE-10000H-NET-RWB SolarEdge 10,000W Home Hub Inverter with Whole Home Backup Potential 1PH 1 x SE-SBI-1PH SolarEdge Home Backup Interface - Home Hub Inverter (Single-Phase RWB) 1 x IAC-RBAT-HANDLE-01 SolarEdge Handles for Manoeuvring Home Battery 400V 1 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 16 x RS485-DOUBLE-1M Double pair genuine RS485 cable 1M - 4 cores Price per Meter 1 x MC4-2M-2 MC4 Pre terminated cable 2m (Pack of 2) This Package includes a FREE Backup Interface (SE-SBI-1PH). Weight: 146.423 kg
£7,854.00 Exc. VAT
£9,424.80 Inc. VAT
Part No: SE-6000H-BATT02-10KWH-RWB Special Offers - Storage Package This part is a special offer made up of the following items: Part 1 x SE-BATTERY02-10KWH SolarEdge Home Battery - 1PH 400V 9.7kWh Battery v02 1 x SE-6000H-NET-RWB SolarEdge 6,000W Home Hub Inverter with Whole Home Backup Potential 1PH 1 x SE-SBI-1PH SolarEdge Home Backup Interface - Home Hub Inverter (Single-Phase RWB) 1 x IAC-RBAT-HANDLE-01 SolarEdge Handles for Manoeuvring Home Battery 400V 1 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 16 x RS485-DOUBLE-1M Double pair genuine RS485 cable 1M - 4 cores Price per Meter 1 x MC4-2M-2 MC4 Pre terminated cable 2m (Pack of 2) This Package includes a FREE Backup Interface (SE-SBI-1PH). Weight: 138.823 kg
£7,019.00 Exc. VAT
£8,422.80 Inc. VAT
Part No: SE-5000H-BATT02-10KWH-RWB Special Offers - Storage Package This part is a special offer made up of the following items: Part 1 x SE-BATTERY02-10KWH SolarEdge Home Battery - 1PH 400V 9.7kWh Battery v02 1 x SE-5000H-NET-RWB SolarEdge 5,000W Home Hub Inverter with Whole Hub Backup Potential 1PH 1 x SE-SBI-1PH SolarEdge Home Backup Interface - Home Hub Inverter (Single-Phase RWB) 1 x IAC-RBAT-HANDLE-01 SolarEdge Handles for Manoeuvring Home Battery 400V 1 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 16 x RS485-DOUBLE-1M Double pair genuine RS485 cable 1M - 4 cores Price per Meter 1 x MC4-2M-2 MC4 Pre terminated cable 2m (Pack of 2) This Package includes a FREE Backup Interface (SE-SBI-1PH). Weight: 138.823 kg
£6,800.00 Exc. VAT
£8,160.00 Inc. VAT
Part No: SE-3680H-BATT02-10KWH-RWB Special Offers - Storage Package This part is a special offer made up of the following items: Part 1 x SE-BATTERY02-10KWH SolarEdge Home Battery - 1PH 400V 9.7kWh Battery v02 1 x SE-3680H-NET-RWB SolarEdge 3,680W Home Hub Inverter with Whole Home Backup Potential1PH 1 x SE-SBI-1PH SolarEdge Home Backup Interface - Home Hub Inverter (Single-Phase RWB) 1 x IAC-RBAT-HANDLE-01 SolarEdge Handles for Manoeuvring Home Battery 400V 1 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 16 x RS485-DOUBLE-1M Double pair genuine RS485 cable 1M - 4 cores Price per Meter 1 x MC4-2M-2 MC4 Pre terminated cable 2m (Pack of 2) This Package includes a FREE Backup Interface (SE-SBI-1PH). Weight: 138.823 kg
£6,726.00 Exc. VAT
£8,071.20 Inc. VAT
Part No: SE-SEDGE3PH-10-RESU10-WG Storage Systems - Self Consumption Packages This part is made up of the following items: 1 x RESU10 LG Chem 10kWh Lithium Battery (51v with BMS) 1 x SE-10000-3PH-RWS 10,000W StorEdge Hybrid Inverter 48V - Three Phase 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 4 x BATCAB35-1M-RED 35mm2 Battery Cable (H01N2-D) 1m - Red 4 x BATCAB35-1M 35mm2 Battery Cable (H01N2-D) 1m - Black 1 x CAT5E-10M Cat 5e Terminated RJ45 Ivory Shielded - 10m 10 x RS485-DOUBLE-1M Double pair genuine RS485 cable 1M - 4 cores Price per Meter 6 x LUG35-8 35mm2 Cable Terminal Lug M8 - Single We've matched the SolarEdge 3phase Hybrid range with the LG's well known RESU low voltage battery range to produce a complete DC-coupled storage package. DC-coupled storage systems are a great option for new installations, because the DC strings can be connected directly to the SolarEdge hybrid inverter along with the battery. That means a separate PV inverter is not required. DC-coupled systems typically experience fewer losses than AC-coupled, because fewer energy conversions are required. This means more of the energy generated by the PV system, that isn't needed in the home right away, can be discharged later from the batteries. This package features SolarEdge's usual high level of monitoring capability and emphasis on safety and so is an ideal solution for large 3phase homes or small commercial sites. Weight: 116.51 kg Rated Power: 10,000 W
£5,550.00 Exc. VAT
£6,660.00 Inc. VAT
Part No: SE-SEDGE3PH-8-RESU10-WG Storage Systems - Self Consumption Packages This part is made up of the following items: 1 x RESU10 LG Chem 10kWh Lithium Battery (51v with BMS) 1 x SE-8000-3PH-RWS 8,000W StorEdge Hybrid Inverter 48V - Three Phase 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 4 x BATCAB35-1M-RED 35mm2 Battery Cable (H01N2-D) 1m - Red 4 x BATCAB35-1M 35mm2 Battery Cable (H01N2-D) 1m - Black 1 x CAT5E-10M Cat 5e Terminated RJ45 Ivory Shielded - 10m 10 x RS485-DOUBLE-1M Double pair genuine RS485 cable 1M - 4 cores Price per Meter 6 x LUG35-8 35mm2 Cable Terminal Lug M8 - Single We've matched the SolarEdge 3phase Hybrid range with the LG's well known RESU low voltage battery range to produce a complete DC-coupled storage package. DC-coupled storage systems are a great option for new installations, because the DC strings can be connected directly to the SolarEdge hybrid inverter along with the battery. That means a separate PV inverter is not required. DC-coupled systems typically experience fewer losses than AC-coupled, because fewer energy conversions are required. This means more of the energy generated by the PV system, that isn't needed in the home right away, can be discharged later from the batteries. This package features SolarEdge's usual high level of monitoring capability and emphasis on safety and so is an ideal solution for large 3phase homes or small commercial sites. Weight: 119.01 kg Rated Power: 8,000 W
£5,420.00 Exc. VAT
£6,504.00 Inc. VAT
Part No: SE-BATTERY02-10KWH-PACK Storage Systems - Li-ion Battery System This part is made up of the following items: 1 x SE-BATTERY02-10KWH SolarEdge Home Battery - 1PH 400V 9.7kWh Battery v02 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection 1 x IAC-RBAT-HANDLE-01 SolarEdge Handles for Manoeuvring Home Battery 400V 1 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection 1 x IAC-RBAT-RWYCBL-01 SolarEdge Branch Connectors for Home Battery 400V SolarEdge Energy Bank 10kWh V2 Battery. Optimized for SolarEdge StorEdge with HD-Wave/ Home Wave technology inverters. Integrates with the complete SolarEdge residential offering, providing a single point of contact for warranty, support, training, monitoring and simplified logistics. You will need to add a plug in which is dependent on the type of inverter you wish to connect: The SetAPP Inverters require the part code: ENET-HBCL-01 The NET Inverters require the part code: ENET-HBNP-01 Please note this package includes the Energy Net Plug-In for the SetApp inverter range, for communication between the inverter and battery, 4 x handles for the carrying and manoeuvring of the battery and a pair of Staubli MC4 Y connectors in case the systems PV inverter only has 1 pair of DC inputs. These ancillaries may not be required for every installation so please feel free to check and remove any items you do not require. You may also want to consider IAC-RBAT-FLRSTD-01 if you wish to floor mount this battery. Additionally please note if the installation already has a SolarEdge Modbus meter, the additional meter in this system (part code: SE-WND-3Y400-MB-K2) will not be required. Finally, if this is not your first installation you may already have IAC-RBAT-HANDLE-01 (handles for lifting the battery) in which case these can also be removed from the package. Please contact us if you have any questions. Please note installers must be trained and certified in order to install this battery. Weight: 120.891 kg
£5,361.00 Exc. VAT
£6,433.20 Inc. VAT
Part No: SE-10000-3PH-RWS Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS 3Phase PV Hybrid inverter, ideal solution for three phase installations with Low Voltage 48V Li-Ion batteries. Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp. Important Please note that unlike standard 1phase Solar Edge StorEdge devices, this 3phase inverter only works with Low Voltage 48V batteries! Supplier Part No: SE10K-RWS48BEN4 Weight: 34.5 kg Rated Power: 10,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 13,500 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 13,500 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.6 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years
£1,598.22 Exc. VAT
£1,917.86 Inc. VAT
Part No: SE-10000-3PH-RWB Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter - with Backup Capability SE5K-RWB / SE8K-RWB / SE10K-RWB 3Phase PV Hybrid inverter with backup battery feature, ideal solution for three phase installations withSolarEdge Low Voltage 48V Li-Ion batteries. Requires the SolarEdge Backup Interface (SE-SBI-3PH) for backup function to work. Simple installation with single inverter for managing both PV production and battery storage Designed to eliminate high voltage during installation, maintenance or firefighting for enhanced safety More energy using DC-coupled solution architecture that stores PV power directly to the battery without AC conversion losses Built-in-module-level monitoring and full visibility of battery status, PV production, and self-consumption data Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp. The 3PH Home Hub inverters MUST have the energy meter (SE-WND-3Y400-MB-K2) installed with 3 x SolarEdge CT clamps. Supplier Part No: SE10K-RWB48BFN4 Weight: 37 kg Rated Power: 10,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 13,500 W Max DC Current: 20 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 12 years
£2,236.87 Exc. VAT
£2,684.24 Inc. VAT
Part No: SE-8000-3PH-RWB Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter - with Backup Capability SE5K-RWB / SE8K-RWB / SE10K-RWB 3Phase PV Hybrid inverter with backup battery feature, ideal solution for three phase installations with SolarEdge Low Voltage 48V Li-Ion batteries. Requires the SolarEdge Backup Interface (SE-SBI-3PH) for backup function to work. Simple installation with single inverter for managing both PV production and battery storage Designed to eliminate high voltage during installation, maintenance or firefighting for enhanced safety More energy using DC-coupled solution architecture that stores PV power directly to the battery without AC conversion losses Built-in-module-level monitoring and full visibility of battery status, PV production, and self-consumption data Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp. The 3PH Home Hub inverters MUST have the energy meter (SE-WND-3Y400-MB-K2) installed with 3 x SolarEdge CT clamps. Supplier Part No: SE8K-RWB48BFN4 Weight: 37 kg Rated Power: 8,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 13,000 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 17.3 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 12 years
£2,206.72 Exc. VAT
£2,648.06 Inc. VAT
Part No: SE-8000-3PH-RWS Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS 3Phase PV Hybrid inverter, ideal solution for three phase installations with Low Voltage 48V Li-Ion batteries Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Important Please note that unlike standard 1phase Solar Edge StorEdge devices, this 3phase inverter only works with Low Voltage 48V batteries! Supplier Part No: SE8K-RWS48BEN4 Weight: 37 kg Rated Power: 8,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 10,800 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 13.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.6 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years
£1,475.31 Exc. VAT
£1,770.37 Inc. VAT
Part No: SE-10000H-NET-RWB Storage Systems - Hybrid Inverter SolarEdge Home Hub Inverter for Storage and Backup Application SE10000H - 10kW Requires the SolarEdge Backup Interface (SE-SBI-1PH) for the Backup funciton to work. (The inverter can work without the Backup interface) The ultimate home energy manager in charge of PV production, battery storage, backup operation during a power outage (may require additional hardware), and smart energy devices Record-breaking 99% weighted efficiency with up to 200% DC oversizing Small, lightweight, and easy to install Advanced safety features with integrated arc fault protection Enables module-level monitoring and full visibility of battery status, PV production, and self-consumption data A scalable solution that supports future homeowner needs through easy connection to a growing ecosystem of products 12-25 Year Warranty. Supplier Part No: SE10000H-RWBMNBF54 Weight: 19.6 kg Rated Power: 10,000 W Min PPT Voltage: 380 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,000 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 0 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No
£1,328.57 Exc. VAT
£1,594.28 Inc. VAT
Part No: SE-8000H-NET-RWB Storage Systems - Hybrid Inverter SolarEdge Home Hub Inverter for Storage and Backup Application SE8000H - 8kW Requires the SolarEdge Backup Interface (SE-SBI-1PH) for the Backup function to work. (The inverter can work without the Backup interface) The ultimate home energy manager in charge of PV production, battery storage, backup operation during a power outage (may require additional hardware), and smart energy devices Record-breaking 99% weighted efficiency with up to 200% DC oversizing Small, lightweight, and easy to install Advanced safety features with integrated arc fault protection Enables module-level monitoring and full visibility of battery status, PV production, and self-consumption data A scalable solution that supports future homeowner needs through easy connection to a growing ecosystem of products 12-25 Year Warranty, see 'Other Parts' section below. Supplier Part No: SE8000H-RWBMNBF54 Weight: 19.6 kg Rated Power: 8,000 W Min PPT Voltage: 380 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,000 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 0 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No
£1,225.88 Exc. VAT
£1,471.06 Inc. VAT
Part No: SE-5000-3PH-RWB Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter - with Backup Capability SE5K-RWB / SE8K-RWB / SE10K-RWB 3Phase PV Hybrid inverter with backup battery feature, ideal solution for three phase installations with SolarEdge Low Voltage 48V Li-Ion batteries. Requires the SolarEdge Backup Interface (SE-SBI-3PH) for backup function to work. Simple installation with single inverter for managing both PV production and battery storage Designed to eliminate high voltage during installation, maintenance or firefighting for enhanced safety More energy using DC-coupled solution architecture that stores PV power directly to the battery without AC conversion losses Built-in-module-level monitoring and full visibility of battery status, PV production, and self-consumption data Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp. The 3PH Home Hub inverters MUST have the energy meter (SE-WND-3Y400-MB-K2) installed with 3 x SolarEdge CT clamps. Supplier Part No: SE5K-RWB48BFN4 Weight: 37 kg Rated Power: 5,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 4,500 W Surge AC Power (1 Second): 5,000 W Max DC Current: 13.3 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 12 years
£1,989.77 Exc. VAT
£2,387.72 Inc. VAT
Part No: SE-5000-3PH-RWS Storage Systems - Hybrid Inverter 48V StorEdge Three Phase Inverter SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS 3Phase PV Hybrid inverter, ideal solution for three phase installations with Low Voltage 48V Li-Ion batteries Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Important Please note that unlike standard 1phase Solar Edge StorEdge devices, this 3phase inverter only works with Low Voltage 48V batteries! Supplier Part No: SE5K-RWS48BEN4 Weight: 34.5 kg Rated Power: 5,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 6,750 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 6,750 W Max DC Current: 12.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.3 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years
£731.46 Exc. VAT
£877.75 Inc. VAT
Part No: SE-6000H-APP-S4 Storage Systems - Hybrid Inverter This part is made up of the following items: 1 x SE-6000H-APP SolarEdge 6000W Single Phase Home Wave Inverter NO DISPLAY 1 x SE-STI-S4 StorEdge DC Interface S4 for HD Wave with LG Chem RESU HV 7-10-16 A groundbreaking SolarEdge HD-Wave inverter matched with an S4 interface for compatibility with the hotly anticipated LG Chem HV range of 7 and 10kWh. The maximum PV yield delivered by the inverter is ideal for making the most of the energy capacity of the LG Chem range. Complete your system in the Segen designer: choose 'Full Hybrid' to match this combination against your PV array. Weight: 14.6 kg Rated Power: 6,000 W Min PPT Voltage: 0 V Max PPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 9,300 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,000 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 2 Euro Efficiency: 98.8 % Transformer: None IP Rating: IP20 MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years
£959.55 Exc. VAT
£1,151.46 Inc. VAT
Part No: SE-5000H-APP-S4 Storage Systems - Hybrid Inverter This part is made up of the following items: 1 x SE-STI-S4 StorEdge DC Interface S4 for HD Wave with LG Chem RESU HV 7-10-16 1 x SE-5000H-APP SolarEdge 5000W Single Phase Home Wave Inverter NO DISPLAY A ground breaking SolarEdge HD-Wave inverter matched with an S4 interface for compatibility with the hotly anticipated LG Chem HV range of 7 and 10kWh. The maximum PV yield delivered by the inverter is ideal for making the most of the energy capacity of the LG Chem range. Complete your system in the Segen designer: choose 'Full Hybrid' to match this combination against your PV array. Weight: 13 kg Rated Power: 5,000 W Min PPT Voltage: 0 V Max PPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 7,750 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 5,000 W Max DC Current: 13.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 2 Euro Efficiency: 98.8 % Transformer: None IP Rating: IP20 MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years
£1,146.79 Exc. VAT
£1,376.15 Inc. VAT
Part No: SE-3680H-APP-S4 Storage Systems - Hybrid Inverter This part is made up of the following items: 1 x SE-STI-S4 StorEdge DC Interface S4 for HD Wave with LG Chem RESU HV 7-10-16 1 x SE-3680H-APP SolarEdge 3680W 1PH Home Wave Inverter - NO DISPLAY A ground breaking SolarEdge HD-Wave inverter matched with an S4 interface for compatibility with the LG Chem HV range of 7 and 10kWh. The maximum PV yield delivered by the inverter is ideal for making the most of the energy capacity of the LG Chem range. Complete your system in the Segen designer: choose 'Full Hybrid' to match this combination against your PV array. Weight: 11.8 kg Rated Power: 3,680 W Min PPT Voltage: 0 V Max PPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 5,700 W Max AC Power (5 Minutes): 3,680 W Surge AC Power (1 Second): 3,680 W Max DC Current: 10.5 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 98.8 % Transformer: None IP Rating: IP20 MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years
£886.03 Exc. VAT
£1,063.24 Inc. VAT
Part No: SE-6000H-NET-RWB Storage Systems - Hybrid Inverter SolarEdge Home Hub Inverter for Storage and Backup Application SE6000H - 6kW Requires the SolarEdge Backup Interface (SE-SBI-1PH) for the Backup funciton to work. (The inverter can work without the Backup interface) The ultimate home energy manager in charge of PV production, battery storage, backup operation during a power outage (may require additional hardware), and smart energy devices Record-breaking 99% weighted efficiency with up to 200% DC oversizing Small, lightweight, and easy to install Advanced safety features with integrated arc fault protection Enables module-level monitoring and full visibility of battery status, PV production, and self-consumption data A scalable solution that supports future homeowner needs through easy connection to a growing ecosystem of products 12-25 Year Warranty. Supplier Part No: SE6000H-RWBMNBF54 Weight: 12 kg Rated Power: 6,000 W Min PPT Voltage: 380 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,000 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 0 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No
£963.63 Exc. VAT
£1,156.36 Inc. VAT
Part No: SE-3680H-AC-S4 Storage Systems - Charger-Inverter This part is made up of the following items: 1 x SE-STI-S4 StorEdge DC Interface S4 for HD Wave with LG Chem RESU HV 7-10-16 1 x SE-3680H-APP-AC StorEdge HD Wave 3680W AC Coupled inverter NO DISPLAY Upgrade existing PV systems to have StorEdge, no matter what the inverter is. This package comprises the 3.68kW AC-Coupled HD-Wave SolarEdge inverter with a StorEdge Interface S4 for compatibility with the RESU7H-R or RESU10H-R. Match it with the SolarEdge energy meter and a suitable CT on our design tool to complete your system. - Specially designed to work side by side with three-phase SolarEdge inverters and non-SolarEdge inverters. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation - No high voltage or current during installation, maintenance or firefighting for maximum safety The StorEdge AC Coupled inverter range does not work with power optimisers or as standard solar PV inverters. They should only be used in conjunction with the relevant StorEdge interface, energy meter and LG Chem RESU HV range. Included in Kit KIT-SOLAREDGE-3.68-AC SolarEdge 3.68kW AC Coupled Kit Weight: 11.8 kg Rated Power: 3,680 W
£1,194.00 Exc. VAT
£1,432.80 Inc. VAT
Part No: SE-5000H-NET-RWB Storage Systems - Hybrid Inverter SolarEdge Home Hub Inverter for Storage and Backup Application SE5000H - 5kW Requires the SolarEdge Backup Interface (SE-SBI-1PH) for the Backup funciton to work. The ultimate home energy manager in charge of PV production, battery storage, backup operation during a power outage (may require additional hardware), and smart energy devices Record-breaking 99% weighted efficiency with up to 200% DC oversizing Small, lightweight, and easy to install Advanced safety features with integrated arc fault protection Enables module-level monitoring and full visibility of battery status, PV production, and self-consumption data A scalable solution that supports future homeowner needs through easy connection to a growing ecosystem of products 12-25 Year Warranty. Supplier Part No: SE5000H-RWBMNBF54 Weight: 12 kg Rated Power: 5,000 W Min PPT Voltage: 380 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 5,000 W Max DC Current: 13.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 0 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years
£800.74 Exc. VAT
£960.89 Inc. VAT
Explore our full range of photovoltaic products at Powerland, including premium-quality power management systems, switches, metres and essential accessories to help you build a complete energy system. For a bespoke package and quote, please contact our team today for a no-obligation quote.
