Solar Panel Fitting & Mounting Kits

Part No: FFLASH-5370B Mounting - Roof Flashings Fast Flash is a self adhesive lead replacement material that has many uses beyond replacement for traditional lead. Fast Flash can be used to flash large round or square penetrations that a Dektite cannot cover - with its self adhesive backing you'll have a water tight penetration in minutes!  This part can be used on GSE In-Roof or Easy Roof In Roof systems as a sealing strip replacement. It can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper metal flashing components.   Supplier Part No:FFR5-370B Weight:5.9 kg

Read more less

Part No: DFE101BM Mounting - In Roof Ideal for weatherproofing cable entry on commercial PV installations. Avoid unwanted long cable runs on roof and down side of building. Dektite allows cables to be taken safely through any trapezoidal or corrugated roof wherever requred. Ensure that MCS weatherpoofing requirements are met by using purpose made products and at the same time protect cables from damage by isolating them from contact with roof materials. Each flashing takes up to 12 cables The Dektite Premium is an easy to install, effective and low cost solution backed by a 20 year warranty and Deks Industries' 50 years experience in design and manufacture of polymer roof flashings. Fix with Dektite Fixing Kit DFK1 which contains sufficient sealant and fixings for two or three flashings, depending on type of roof sheet. Dektite Premium DFE101BM * Purpose made weatherproofing as required by MCS * Avoids unwanted long cable runs on roof * Protects cables from damage - up to 12 through each flashing * Tough UV resistant EPDM * Fits any trapezoidal or corrugated profile * Easy to fit using Dektite Fixing Kit DFK1 * 20 year Dektite warranty   Supplier Part No:DFE101BM Weight:0.09 kg

Read more less

Part No: SSP-ERIC-TILE-C-SLT Mounting - Roof Anchor- Tile & Slates This part is a special offer made up of the following items: Part   1 x SSP-ERIC-TILE-C Eric Tile C roof hook (Compatible with Schletter and Clenergy)   1 x SLT-943410-025 M10x25 Square head screw   1 x SLT-943912-010 Serrated M10 flange nut   ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants, and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail. Manufactured using high-quality materials, with the polypropylene plate’s working temperature of – 40c to 120c. A choice of either an, “L” or “C” roof hook, and fixings to secure are included with the ERIC-TILE. 10 year product guarantee Compatible with Schletter.   Weight: 1.03 kg

Read more less

Part No: SSP-ERIC-TILE-C Mounting - Roof Anchor- Tile & Slates ERIC-TILE plain tile roof hook allows for simple solar panel installations on plain/rosemary tiled roofs. No cutting, no sealants and no leaks. Helps prevent tile breakages whilst allowing installers to stand on the mounting rail.   Manufactured using high quality materials, with the polypropylene plate’s working temperature of – 40c to 120c. A choice of either an, “L” or “C” roof hook, and fixings to secure are included with the ERIC-TILE.   Compatible with Schletter and Clenergy.   Supplier Part No: Eric tile C shaped Weight: 1 kg

Read more less

Part No: SSP-SLATE-PLATE-Z-500-250 Mounting - Roof Anchor- Tile & Slates Quick and simple solar installations on slate roofs. No cutting, no sealants and no leaks. Available in 13 different sizes with an option of either an L or Z shaped roof hook for various mounting rail types.   Supplier Part No: Slate Plate Z shaped Weight: 1 kg

Read more less

Part No: ER-I-PRO-07 Mounting - Roof Anchor- Tile & Slates The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-I-PRO/07 Weight: 0.5 kg

Read more less

Part No: MC4-5M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-50021 Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: MC4-Y-CONN-FEM Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0334 Weight: 0.25 kg

Read more less

Part No: MC4-Y-CONN-MAL Cables - Connectors mC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm²   Supplier Part No: 32.0333 Weight: 0.25 kg

Read more less

Part No: MC4-SPL-Y-CONN Cables - Connectors MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm² MC-4 splitter kit, consisting of: MC4-Y-CONN-FEM and MC4-Y-CONN-MAL For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SYPL2, Stäubli, PV Cable   Weight: 0.5 kg

Read more less

Part No: CABLE4-1-250 Cables - DC Cables 4 mm², single-core, black, 250m NEW H1Z2Z2-K certified 250m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: CABLE4-1-250 Weight: 14.81 kg Length: 250 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE4-1-500 Cables - DC Cables 4 mm², single-core, black, 500m NEW H1Z2Z2-K certified 500m solar cable with length label. Supplied on a reusable spool. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.   Supplier Part No: 26036 Weight: 30 kg Length: 500 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 32 Max Voltage: 1800

Read more less

Part No: CABLE6-1-500 Cables - DC Cables 6 mm², single-core, black, 500m 500m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 6 mm²  (this is not the cable diameter, but rather the cross-sectional area).  System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.  Important Alternative cable is BC-CABLE6-1-500 Supplier Part No: 26038 Weight: 38 kg Length: 500 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

Read more less

Part No: CABLE6-1-1000 Cables - DC Cables 6 mm², single-core, black, 1000m NEW H1Z2Z2-K certified 1000m solar cable with length label.  Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÜV approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor          Flexible tinned copper (Class 5) Insulation           Halogen-free cross-linked compound Outersheath      Halogen-free cross-linked flame retardant compound   The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version. As with the TÜV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human.   Supplier Part No: CABLE6-1-1000 Weight: 74 kg Length: 1,000 m Area: 6 mm2 Colour: Black Cores: 1 - N Max Current: 41 Max Voltage: 1800

Read more less

Part No: ISK-MT174 Meters - Three Phase Generation Meters The MT174 electronic three-phase meters are designed for measurement and registration of active, reactive and apparent energy and demand in three-phase four-wire networks Multi-tariff c\w internal time switch 120A Three Phase/Single Phase kWh meter OFGEM Approved - Import/Export Energy Tariff control input Small size modern design Pulse output Max Demand Low Profile   Supplier Part No: MT174-Direct Weight: 1 kg

Read more less

Part No: REN-900260 Mounting - Cable Clips 15x12x10 mm Material thickness: 1,5 mm Usable with: Framed modules   Supplier Part No: 900260 Weight: 0.01 kg

Read more less