INVERTERS FOR SOLAR / BATTERY STORAGE

This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Supplier Part No: X1 G4- Hybrid 5.0 D with Wi-Fi Weight: 24 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years  

Read more less

Part No: SOL-RS485-PLUGS Display - Web Interfaces Solis RS485 Comm Plugs to use to connect the communication port comes in a pack of 5. 

Read more less

Leading Features:• Max. efficiency 97.7%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• 2 MPPT design with precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer       Solis Phases      1 Phase Power Rating          kW3.6 Inverter Type        String Inverter Built in DC        Yes No. of MPPT         2 Built in Communication        Optional Commodity Code          85044085 Dimensions (mm) (H x W x D)        543 x 310 x 160

Read more less

Technical Features  Automatic UPS switching Supports Max 6pcs in parallel Up to 50A max charge/discharge current Integrated 4 MPPTs for multiple array orientations 6 customisable charge/discharge time settings 10 second 200% surge power backup overload capability String current up to 20A, perfectly match large current modules Supports peak shaving control in both "self-use" and "generator" mode Supports Unbalanced and Half-Wave Loads on both the Grid and Backup Port Intelligent AC coupling scheme, easily upgrade existing grid-connected systems Application.    Commercial Promotion.       Solis Pylon Combo Manufacturer.      Solis Phases.      3 Phase Power Rating.        kW20 Inverter Type.      Hybrid Inverter No. of MPPT.      4 Commodity Code.       85044086 Dimensions         (mm) (H x W x D)563 x 546 x 235

Read more less

FeaturesHybrid Inverter/ChargerThe Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with 450VDC 4kWp PV input.Combination of an inverter, AC charger, and Solar MPPTThe inverter produces a perfect sine wave, and able to supply high powered appliances. It is also bi-directional, charging the battery when excess solar power or AC supply is available, or converting from the battery when it is needed.Wide MPPT voltage range80 – 450VDC, with a 120 VDC PV startup voltage.Light weight, efficient and quietThanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.Display, Bluetooth and VictronConnect appThe display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app.Extendable PV capacity, both AC-coupled and DC-coupledThe integrated 4kWp PV capacity can be extended by adding Solar Chargers to the system, for example our Smart Solar Charger range, including the Smart Solar RS models. When connected in a VE.Can network, all battery charging will operate synchronously and coordinated.Alternatively, the PV capacity can be extended by installing PV Inverters, of which the output power will be automatically controlled by the integrated Frequency Shift Power Control.Communication portsVE.Can connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring.I/O ConnectionsProgrammable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS.

Read more less

The Fox system is easy to install and will save you time spent on installation. Remote monitoring is also avalible via your smartphone or web portal. Compatible with: ECS2900  Compatible with: ECS4100  Compatible with: ECS4300  Compatible with: ECS4800  Compatible with: HV2600  IP65 rated - suitable for outdoor installations Remote monitoring via web portal or smartphone Easy to expand battery capacity Dual MPPT - ensure optimal solar production High round-trip efficiency of 97%   CT Clamps and WiFi stick are included in the box. A second CT will be required if there's another generator set (i.e PV, wind or other). A meter will be required for >30m distance between inverter and incoming power connection point. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. Supplier Part No: FE-H1-3.0-G2 Weight: 22 kg Rated Power: 3,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,000 W Surge AC Power (1 Second): 3,300 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

The X3-ULTRA is a versatile 3ph hybrid inverter that includes inversion, solar charging, and battery charging. The X3 ULTRA series can be used with different capacities of SolaX battery. The X3 Ultra can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. AC attributes Max power: 22000W Max current: 31.9A Number of phases: 3 DC attributes Number of MPPT 3 V range of MPPT 160-950V Max power 40kW Max voltage 1000V Start up voltage 200V System Max efficiency 99.7% IP rating IP66 Weight 47kg Dimensions 696 x 529 x 240 mm CommunicationWarranty 5 years Key features Max. 36A DC input per MPPT 3 MPPT, 6 Strings 100% Unbalanced Output AI-Driven Energy Management

Read more less

Technical Features  4 Integrated MPPTs and 8 strings with string current capacity of up to 20A Backup port supports 1.6 times/2 seconds overload Supports maximum 96kW usable PV input power Enables peak shaving control in both "self-use" and "generator" modes Compatible with a wide voltage range to accommodate various batteries Increased battery protection and operation features to extend battery life Allows parallel operation of up to 6 units for both on-grid and off-grid application Generator connectivity with multiple input methods and automatic generator On/Off control Maximum charge/discharge current of up to 140A/70A+70A on two independently controlled battery ports

Read more less

Part No: SOLAX-BMS-G2-HV-T58-6-34.8 Storage Systems - Li-ion Battery Pack Package of: Solax BMS Parallel Box and SolaX Triple Power 5.8 Master and Slave Batteries The Solax BMS Parallel Box is an advanced battery management system that enables seamless parallel connection of multiple batteries, ensuring efficient energy utilisation and enhanced performance. With its cutting-edge technology and robust design, this parallel box is the ideal choice for residential and commercial applications. Possible System Configurations T58 X1 – Single Phase: 2, 4 or 6 Triple Power 5.8kWh batteries.  X3 – Three Phase: 4, 6, 8 Triple Power 5.8kWh batteries.  BMS Parallel Box II G2 Installation Video Please note: Unlike G1 version of BMS-Parallel Box this G2 now works with T58 Master batteries, meaning it is easier to retro-fit to existing systems A minimum of 2 batteries (single phase) and 4 batteries (three-phase) must be used with this product. Weight: 441.9 kg Battery Type: Lithium Ion Nominal Energy: 35200 Wh Depth of discharge: 90.00 % Voltage: 690 V Continuous Discharge Rate (Normal Use): 17250 W Maximum Discharge Rate (5 Minutes): 3500 W Surge Discharge Rate (15 Seconds): 24000 W Maximum Charge Rate (5 Minutes): 3500 W

Read more less

Fox ESS H3 Pro 15.0 three-phase hybrid inverter 3 MPP tracker Full three-phase emergency power capability Two battery inputs for even easier connection of high-voltage batteries  Modern and functional design Remote monitoring 10-year warranty (5 years as standard and extendable to 10 years through registration) Smart meter and WiFi dongle are included in the scope of delivery Note: For specific battery sizing, please see the attached Battery Sizing Guide below   Supplier Part No: FE-H3-PRO-15.0 Weight: 52.5 kg Rated Power: 15,000 W Min PPT Voltage: 160 V Max PPT Voltage: 1,000 V DC Startup Voltage: 160 V DC Shutdown Voltage: 1,000 V Max Input Voltage: 1,000 V Max DC Power: 22,500 W Max AC Power (5 Minutes): 15,000 W Surge AC Power (1 Second): 16,500 W Max DC Current: 32 A Max DC Inputs: 6 Has DC Fuses: 1 Connector: MC4   Included Connectors: 3 Euro Efficiency: 97.3 % Transformer: N/A MPPT Quantity : 6 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-KH1-10.5 Storage Systems - Hybrid Inverter The FoxESS KH10.5 is a stylish 10.5kW single phase IP65 full hybrid inverter. The Fox KH10.5 uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most out of your solar system. The FoxESS KH10.5 is easy to install, saving you valuable time on site. The FoxESS Cloud allows for easy remote monitoring and control, making it a breeze to support remotely.  FoxESS KH10.5 Features Compatible with: ECS2900  Compatible with: ECS4100  Compatible with: ECS4800  Compatible with: HV2600  IP65 rated solution - suitable for outdoor installations Remote monitoring via web portal or smartphone with included Wi-Fi dongle Natural cooling - ensure quiet operation Quad MPPT - optimal solar production Built in Type II AC & DC surge protection Register here for a free extra 5-years warranty! CT clamp is included in the box for zero export control. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. The FoxESS KH10.5 is NRS certified.   Supplier Part No: KH10.5 Weight: 29 kg Length: 0.62 m Rated Power: 10,500 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 8 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-T-17.0 Inverters - Main Units Rating: 17,000W Phases: 3 FOX ESS - PV Inverter - T Series - 17.0kW T17-G3 Dual-MPPT T Series range includes 6.0 - 25.0kW models. The T Series a 3-phase aimed at domestic and small-scale commercial installations. High Performance: Low start-up voltage, wide voltage range, 98.6% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: T17 Weight: 20 kg Rated Power: 17,000 W Min PPT Voltage: 140 V Max PPT Voltage: 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 25,500 W Max AC Power (5 Minutes): 17,000 W Surge AC Power (1 Second): 18,700 W Max DC Current: 28 A Max DC Inputs: 4 Has DC Fuses: 4 Connector: MC4   Included Connectors: 4 Euro Efficiency: 97.8 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch:Yes Warranty: 5 years

Read more less

Part No: FE-T-10.0 Inverters - Main Units Rating: 10,000W Phases: 3 FOX ESS - PV Inverter - T Series - 10.0kW T10-G3 Dual-MPPT T Series range includes 6.0 - 25.0kW models. The T Series a 3-phase aimed at domestic and small-scale commercial installations. High Performance: Low start-up voltage, wide voltage range, 98.6% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: T10 Weight: 17 kg Rated Power: 10,000 W Min PPT Voltage: 140 V Max PPT Voltage: 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 11,000 W Max DC Current: 14 A Max DC Inputs: 2 Has DC Fuses: 2 Connector: MC4   Included Connectors: 2 Euro Efficiency: 97.8 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-T-6.0 Inverters - Main Units Rating: 6,000W Phases: 3 FOX ESS - PV Inverter - T Series - 6.0kW T6-G3 Dual-MPPT T Series range includes 6.0 - 25.0kW models. The T Series a 3-phase aimed at domestic and small-scale commercial installations. High Performance: Low start-up voltage, wide voltage range, 98.6% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: T6 Weight: 17 kg Rated Power: 6,000 W Min PPT Voltage: 140 V Max PPT Voltage: 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 9,000 W Max AC Power (5 Minutes): 6,000 W Surge AC Power (1 Second): 6,600 W Max DC Current: 14 A Max DC Inputs: 2 Has DC Fuses: 2 Connector: MC4   Included Connectors: 2 Euro Efficiency: 97.8 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-S2500 Inverters - Main Units Rating: 2,500W Phases: 1 FOX ESS - PV Inverter - S Series - 2.5kW S2500-G2 Single-MPPT S Series range includes 0.7 - 3.0kW models. The S Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: S2500 Weight: 5.4 kg Rated Power: 2,500 W Min PPT Voltage: 60 V Max PPT Voltage: 500 V DC Startup Voltage: 60 V DC Shutdown Voltage: 500 V Max Input Voltage: 500 V Max DC Power: 3,750 W Max AC Power (5 Minutes): 2,500 W Surge AC Power (1 Second): 2,750 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 1 Connector: MC4   Included Connectors: 1 Euro Efficiency: 96.8 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-S1500 Inverters - Main Units Rating: 1,500W Phases: 1 FOX ESS - PV Inverter - S Series - 1.5kW S1500-G2 Single-MPPT S Series range includes 0.7 - 3.0kW models. The S Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maxium effiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: S1500 Weight: 5.4 kg Rated Power: 1,500 W Min PPT Voltage: 60 V Max PPT Voltage: 500 V DC Startup Voltage: 60 V DC Shutdown Voltage: 500 V Max Input Voltage: 500 V Max DC Power: 2,250 W Max AC Power (5 Minutes): 1,500 W Surge AC Power (1 Second): 1,650 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 1 Connector: MC4   Included Connectors: 1 Euro Efficiency: 96.5 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Harness the power of the sun day and night with FoxESS' groundbreaking line of hybrid inverters. Easy installation - Flexible configuration, Plug & Play, built-in fuse protection. High Voltage - Includes high-voltage batteries for maximum round-trip efficiency. IP65 Rated - Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring - Monitor remotely via app or web portal. Easily expand your system by adding extra batteries. There are three battery series you can choose from, which enables a storage capacity of up to 86.40 kWh. A max. of 10 storage inverters can be connected in parallel which allows you to enlarge the system scale based on different installation requirements. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: FE-H3-PRO-30.0 Weight: 57.5 kg Rated Power: 30,000 W Min PPT Voltage: 160 V Max PPT Voltage: 1,000 V DC Startup Voltage: 160 V DC Shutdown Voltage: 1,000 V Max Input Voltage: 1,000 V Max DC Power: 45,000 W Max AC Power (5 Minutes): 30,000 W Surge AC Power (1 Second): 33,000 W Max DC Current: 96 A Max DC Inputs: 6 Has DC Fuses: 1 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.4 % Transformer: N/A MPPT Quantity : 6 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-KH1-9.0 Storage Systems - Hybrid Inverter The FoxESS KH9 is a stylish 9kW single phase IP65 full hybrid inverter. The Fox KH9 uses high voltage batteries for maximum round-trip efficiency, ensuring you get the most out of your solar system. The FoxESS KH9 is easy to install, saving you valuable time on site. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards.   Supplier Part No: FE-KH1-9.0 Weight: 29 kg Rated Power: 9,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 13,500 W Max AC Power (5 Minutes): 9,000 W Surge AC Power (1 Second): 9,900 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 6 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity :4 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

The SolaX X1 Mini 2.0kW Single Phase Solar Inverter is a market-leading product offering the perfect balance between performance, reliability, functionality, price and length of warranty. This SolaX X1 Mini 2.0kW inverter boasts a wide MPPT voltage range to allow for more energy harvesting and have a maximum input voltage of 450V, with a maximum efficiency of 98%. SolaX Power single phase inverters are IP66 rated, have no internal fan and come with optional ‘plug & play’ WiFi. Low Start Up Voltage Small & Lightweight Max Efficiency Up To 98% IP66 Rated Standard 10 year warranty, with option to extend to 20 years. Register your warranty here: https://www.solaxcloud.com/#/warranty The SolaX X1 Mini 2.0kW single phase solar inverter includes a built in DC switch as standard. Small, Lightweight & Quiet The X1 Mini has been designed to be installed in the smallest of spaces. It has a footprint of only 32.8cm and weighs in at only 6KG. The X1 Mini is small but it is not lacking in performance.   Brand SolaX Power Protection Class IP66 Dimensions 26.7 x 32.8 x 12.6 Weight 6 Warranty 10 Years

Read more less

CLICK HERE FOR SPEC SHEETS The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.   Features Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control Monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more… Split phase and three phase capability Two units can be configured for split phase, and three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity. For more detail please enter parallel in the search box on our website. Solar energy: AC power available even during a grid failure The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).   Brand Victron Energy Manufacturer Part Number QUA123020010 Voltage 12 Transfer Switch (A) Yes Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay 3x Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

Read more less

CLICK HERE FOR SPEC SHEETS   The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.   Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP481500000 Voltage 48 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 500 Peak Power (W) 900 Max Efficiency 92% Zero Load Power (W) 7 Charge Current House Battery (A) 6 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H311 x W182 x D100mm Weight (kg) 4.4 Warranty 5 Years Country of Manufacture India

Read more less

Part No: HUA-SMART-WLAN-FE  Display - Web Interfaces   Huawei Smart Dongle  - Wi-Fi and Ethernet SDongleA-05 (HUA-SMART-WLAN-FE) is a smart communications expansion module that works with  Huawei inverters (3KTL-M0 to 20KTL-M0) to implement communication between inverters and the management system using WLAN (Wireless) or FE (Fast Ethernet). A Smart Dongle can be used for daisy chaining devices using RS485 communication (inverter daisy chained, or inverters connected with other devices). A maximum of 10 devices can be connected together. When multiple inverters are connected together, only one Smart Dongle or one SmartLogger is allowed.  

Read more less

Features of the Phoenix 48/2000 Smart Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch Brand Victron Energy Manufacturer Part Number PIN482201000 gtin 8719076057550 Voltage 48V Cont. Output Power at 25°C 2000VA Peak Power 4000W Output AC Voltage 230V Efficiency 94% Protection Category IP21 Dimensions H485 x W219 x D125mm Weight 13Kg Warranty 5 Years Bluetooth Enabled Yes Country of Manufacture China

Read more less

CLICK HERE FOR SPEC SHEETS   The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.   Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP481800000 Voltage 48 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 800 Peak Power (W) 1600 Max Efficiency 94% Zero Load Power (W) 8 Charge Current House Battery (A) 9 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H360 x W240 x D100mm Weight (kg) 6.4 Warranty 5 Years Country of Manufacture India

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer       Solis Phases         1 Phase Power Rating         kW0.7 Inverter Type           String Inverter Built in DC           Yes No. of MPPT           1 Built in Communication          Optional Commodity Code         85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer          Solis Phases            1 Phase Power Rating               kW1.5 Inverter Type              String Inverter Built in DC               Yes No. of MPPT            1 Built in Communication            Optional Commodity Code              85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

CLICK HERE FOR SPEC SHEETS   The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.   Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP482120000 Voltage 48 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 1200 Peak Power (W) 2400 Max Efficiency 95% Zero Load Power (W) 10 Charge Current House Battery (A) 13 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H406 x W250 x D100mm Weight (kg) 8.2 Warranty 5 Years Country of Manufacture China

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer.        Solis Phases.         1 Phase Power Rating        kW2.5 Inverter Type.       String Inverter Built in DC.        Yes No. of MPPT.     1 Built in Communication.        Optional Commodity Code.        85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Part No: VIR-CSI6000 Inverters - Main Units Rating: 6,000W Phases: 1

Read more less

Part No: VIR-CSI5000 Inverters - Main Units Rating: 5,000W Phases: 1  

Read more less

Part No: VIR-CSI3600 Inverters - Main Units Rating: 3,600W Phases: 1

Read more less

Part No: VIR-CSI3000 Inverters - Main Units Rating: 3,000W Phases: 1

Read more less

Part No: VIR-CSI2500 Inverters - Main Units Rating: 2,500W Phases: 1  

Read more less

Part No: VIR-CSI2000 Inverters - Main Units Rating: 2,000W Phases: 1

Read more less

Part No: VIR-CSI1500 Inverters - Main Units Rating: 1,500W Phases: 1

Read more less

Part No: VIR-CSI1000 Inverters - Main Units Rating: 1,000W Phases: 1

Read more less

The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems. The GivEnergy Gen 3 hybrid inverter offers all of the benefits of the GivEnergy Gen 2 hybrid inverter while benefiting from a cleaner design discretely enclosing the connection ports. The 10kW Gen 3 hybrid inverter comes with an increased backup power output capability of 10kW when Solar and Battery are used in tandem. Additionally, the Gen 3 has an increased max input current per string of 30A allowing for higher current panels to be utilised in your system designs and an increased MPPT range.  Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. Higher Charge/Discharge Rate: High efficiency, high battery discharge rates of up to 10.5kW. Flexible Rate Tariff: Charge the battery off peak where its cleaner, greener and less costly, then discharge the battery during peak times for maximum saving. 12 Year Warranty: Supplied with a full manufacturers warranty, extendable to 10 years. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 10kW Max current: 46A Number of phases: 1 DC attributes Max PV power 15.0kW Max IscMax I (per string) 38A30A Max voltage 600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V Battery Battery type LiFePO4 Battery voltage range 120-510V Charge / discharge current 30A / 30A Max. C / D power 10000W / 10500W Backup Terminal Parameters (AC) Nominal AC output power 10000W Nominal voltage 230Vac Max. output current 46A Automatic switch time 10ms System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 36kg Dimensions 588 * 214 * 480mm Key features In-built WiFi and LAN for internet connectivity.Backup for power cuts with 10ms automatic switch time.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems. The GivEnergy Gen 3 hybrid inverter offers all of the benefits of the GivEnergy Gen 2 hybrid inverter while benefiting from a cleaner design discretely enclosing the connection ports. The 8kW Gen 3 hybrid inverter comes with an increased backup power output capability of 8kW when Solar and Battery are used in tandem. Additionally, the Gen 3 has an increased max input current per string of 25A allowing for higher current panels to be utilised in your system designs and an increased MPPT range.  Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. Higher Charge/Discharge Rate: High efficiency, high battery discharge rates of up to 8.5kW. Flexible Rate Tariff: Charge the battery off peak where its cleaner, greener and less costly, then discharge the battery during peak times for maximum saving. 12 Year Warranty: Supplied with a full manufacturers warranty, extendable to 10 years. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 8kW Max current: 37A Number of phases: 1 DC attributes Max PV power 12.0kW Max IscMax I (per string) 30A25A Max voltage 600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V Battery Battery type LiFePO4 Battery voltage range 120-510V Charge / discharge current 25A / 25A Max. C / D power 8000W / 8500W Backup Terminal Parameters (AC) Nominal AC output power 8000W Nominal voltage 230Vac Max. output current 37A Automatic switch time 10ms System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 36kg Dimensions 588 * 214 * 480mm Key features In-built WiFi and LAN for internet connectivity.Backup for power cuts with 10ms automatic switch time.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 3.6kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. Please note, customers new to Givenergy need to call the Givenergy team for training before installation. Also, customers and their installers must have logins created on the GivEnergy portal in order for systems to be registered and commissioned for full operation. AC attributes Max power: 3.6kW Max current: 16A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

The GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seemlessly integrate battery storage into PV systems. The Givenergy hybrid inverter offers all of the benefits while benefiting from a cleaner design discretely enclosing the connection ports.  Additionally, it will minimise import by discharging to meet demand in the property with a discharge rate of up to 20kW. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. Higher Charge/Discharge Rate: High efficiency, high battery discharge rates of up to 20kW. Flexible Rate Tariff: Charge the battery off peak where its cleaner, greener and less costly, then discharge the battery during peak times for maximum saving. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max Output Power: 20.0kW Max Output Current: 29A Number of phases: 3 DC attributes Max PV power 30.0kW Max Isc 37.5A Max I (per string)Max voltage 30A1000V Start up voltageNo. of MPPTsMPPT Range 200V2200-850V Battery Battery type LiFePO4 Battery voltage range 200-800V Charge / discharge current 50A / 50A Max. Charge/Discharge 20000W / 20000W Backup Terminal Parameters (AC) Nominal AC output power 20000W Nominal voltage 400Vac Max. output current 29A Automatic switch time 10ms System MPPT efficiency 99.9% Charge / discharge efficiency 97.5% / 97% IP rating IP65 Weight 40.4kg Dimensions 658*214*480mm Key features In-built WiFi and LAN for internet connectivity.Backup for power cuts with 20ms automatic switch time.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 6kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 6kW Max current: 26A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 5kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. AC attributes Max power: 5kW Max current: 21.7A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

Part No: SOL-S6-EH3P12K-H Storage Systems - Hybrid Inverter Features: Integrated 4 MPPTs for multiple array orientations Up to 50A max charge/discharge current String current up to 20A, perfectly match large current modules 10 second 200% surge power backup overload capability Supports Max 6 pcs in parallel Up to 200% DC oversizing Supports Unbalanced and Half-Wave Loads on both the Grid and Backup Port Supports peak shaving control in both "self-use" and "generator" mode 6 customisable charge/discharge time settings Automatic UPS switching Intelligent AC coupling scheme, easily upgrade existing grid-connected systems Note: Including 3 current sensors for direct connection to the inverter

Read more less

Part No: SOL-S6-EA1P6K-L Storage Systems - Charger-Inverter Solis Single Phase Low Voltage AC-Coupled Inverters Supports Peak Shaving Mode Industry leading to a max 125A/6kW max charge/discharge rating Provide intelligent time of use solution together with the monitoring group Increased battery protection and operation features to extend battery life Real-time battery monitoring, remote upgrade, and battery healing function to prolong battery life 40-60V battery voltage range 19.9kg weight  1P66 Ingress protection 

Read more less

Part No: SOL-S6-EA1P5K-L Storage Systems - Charger-Inverter Solis Single Phase Low Voltage AC-Coupled Inverters   S6-EA1P(3.6-6)K-L series is a new generation of AC coupled products, designed to provide photovoltaic energy storage upgrading solutions for the built grid-tied system, so that it has energy storage and emergency power supply capabilities. Supports Peak Shaving Mode Industry leading to a max 125A/6kW max charge/discharge rating Provide intelligent time of use solution together with the monitoring group Increased battery protection and operation features to extend battery life Real-time battery monitoring, remote upgrade, and battery healing function to prolong battery life 40-60V battery voltage range 19.9kg weight  1P66 Ingress protection 

Read more less

Part No: SOL-METER-1PH-CT1 Display - Power Management ACR10R16DTE Single phase meter for Export Limitation with Solis 1-phase inverters. Comes with 120A CT. Meter allows for full 24 hour Consumption Monitoring. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a  result of incorrectly installed systems.  

Read more less

Part No: SOL-5G-5.0-DY-DL5.0C-5.12 Storage Systems - Grid Backup Packages This part is made up of the following items: 1 x DY-DL5.0C-H Dyness DL5.0C 5.12kWh LV LFP Battery with Heated Cells   1 x SOL-5K-RHI-48ES-5G-DC EH1 Solis Energy Storage 5kW Hybrid 5G Inverter with DC switch   1 x DY-DL5.0C-STACKBRACKET Dyness DL5.0C - Stacking Bracket for up to 6 units   1 x KETO-00 Jean Muller Fuse-switch-disconnector KETO size 00 body (battery isolator)   2 x N5014607-125A.   NH Fuse-link 125A for KETO-00

Read more less

Part No: SOL-5G-5.0-DY-DL5.0C-15.36 Storage Systems - Grid Backup Packages This part is made up of the following items: 3 x DY-DL5.0C-H Dyness DL5.0C 5.12kWh LV LFP Battery with Heated Cells   1 x SOL-5K-RHI-48ES-5G-DC EH1 Solis Energy Storage 5kW Hybrid 5G Inverter with DC switch   3 x DY-DL5.0C-STACKBRACKET Dyness DL5.0C - Stacking Bracket for up to 6 units   1 x KETO-00 Jean Muller Fuse-switch-disconnector KETO size 00 body (battery isolator)   2 x N5014607-125A.   NH Fuse-link 125A for KETO-00

Read more less