Part No: REN-420405 Mounting - Roof Anchor- Trapezoidals For use on pitched roofs in landscape with the MetaSole and MS+ range. Weight: 0.09 kg
£4.20 Exc. VAT
£5.04 Inc. VAT
Part No: SLT-130004-200 Mounting - Roof Anchor- Trapezoidals This is a new version of the popular trapezoidal fastener ClampFit-H for landscape modules. The new fastener uses standard module clamps, which makes the different sizes redundant and provides a classical “one fits all” solution for this extremely cost effective fastener. Works with standard Schletter Rapid2 + and Rapid16 module clamps. The system is suitable for all trapezoidal sheets whose sides are at least 22 mm high and from 8 ° to max. 45 ° are inclined System components: aluminium Screws: stainless steel Seal: EPDM Screws must be ordered separately as needed (2 pieces for each ClampFit) Please note typically this system will use 4 fixing points per module. At high wind or snow loads or with large modules it can might be required to use more fixing points. Keywords: Schletter, PV Mounting, Roof Anchor- Trapezoidal Screws are not included. Please use with 2 x SLT-943000-360 screws per Schletter ClampFit Fastner piece. The Schletter ClampFit Fasteners are for our rail-less solutions on IBR/Trapezoidal roofs for panels that are Landscape orientated. Supplier Part No: 130004-200 Weight: 0.12 kg PV Light: R2+
£3.48 Exc. VAT
£4.18 Inc. VAT
Part No: UBIFLEX-B3-400X12 Mounting - Roof Flashings UBIFLEX NON-LEAD FLASHING BLACK 400mm x 12m Why use lead? Use Ubiflex instead! No scrap value – no risk of theft. Saves time & money – up to 50% quicker to install than lead. No toxic risk – environmentally friendly and recyclable. 80% lighter than lead – less risk of injury. BRE wind tunnel tested, BBA Certified and approved by NHBC (B3 only). 25 year guarantee (B3 only). Ubiflex Part No 534040 Supplier Part No: 534040 Weight: 18 kg
£214.88 Exc. VAT
£257.86 Inc. VAT
Part No: GSE-VELUX-MK08-RIGHT Mounting - Roof Flashings GSE/VELUX lateral Flashing for MK08 (Right) Supplier Part No: ART103629 Weight: 0.57 kg
£31.75 Exc. VAT
£38.10 Inc. VAT
Part No: GSE-VELUX-MK08-LEFT Mounting - Roof Flashings GSE/VELUX lateral Flashing for MK08 (Left) Supplier Part No: ART103622 Weight: 0.57 kg
£31.75 Exc. VAT
£38.10 Inc. VAT
Part No: DFK1 Mounting - Roof Flashings Kit for fixing Dektites on metal roofs. Contains 25 screws/washers/caps + silicone sealant. One kit fixes 2 or 3 x Dektite DFE101BM Keywords: Deks, PV Cable, Cable Flashing Supplier Part No: FX901 Weight: 0.31 kg
£8.28 Exc. VAT
£9.94 Inc. VAT
Part No: UBIFLEX-HIGH-TACK-SEALANT Mounting - Roof Flashings Ubiflex High Tack sealant for sealing Ubiflex down to tiles, slates and overlap joints. Ubbink Part no; 534066 Supplier Part No: 534066 Weight: 0.53 kg
£7.94 Exc. VAT
£9.53 Inc. VAT
Part No: ESD-1003070 Mounting - Washers Supplier Part No: 1003070 Items in this pack: 50 Weight: 0.001 kg
£0.09 Exc. VAT
£0.11 Inc. VAT
Part No: SPAX-HIFORCE-6X80-A2-100 Mounting - Wood Screws HI.FORCE, 6 x 80 mm, 100 pieces, full thread, washer head, T-STAR plus T30, 4CUT, stainless steel A2 Special Features: T-Star plus - secure fit of the BIT and better driving Washer Head - Ensure higher pull through forces, larger screw distance Ground serrations - Quick and secure fastening 4CUT point - No pre-drilling, its point effectively reduces splitting effect Stainless Steel A2 Supplier Part No: SPAX-HIFORCE-6X80-A2-100 Items in this pack: 100 Weight: 0.084 kg
£44.20 Exc. VAT
£53.04 Inc. VAT
Part No: REN-900013-100 Mounting - Wood Screws Wood screw slated tiles: REN-900013, pack of 100 Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. Supplier Part No: R900013-100 Items in this pack: 100 Weight: 1.145 kg Length: 0.12 m
£40.16 Exc. VAT
£48.19 Inc. VAT
Part No: SLT-943208-080 Mounting - Wood Screws WOOD SCREW 8 x 80 mm Wood screw with plate head, VA - Stainless steel Supplier Part No: 943208-080 Weight: 0.02 kg
£0.54 Exc. VAT
£0.65 Inc. VAT
Part No: GSE-GM-BCK-FIX-SUP-KIT-GRND Mounting - Ground Mount GSE Ground Mount: MOUNTING ACCESSORY Rear support 200x429mm - FOR AC/DC ISOLATOR. The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART101525 Weight: 0.25 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£22.73 Exc. VAT
£27.28 Inc. VAT
Part No: SLT-121009-440 Mounting - FixZ FixZ-15 Further development of Schletter’s proven FixZ-7 system with an even steeper inclination angle. Provides additional elevation for flat or low pitch trapezoidal sheet metal roofs Quick and easy assembly Better rear airing Better self-cleaning Higher yields Optimum load transmission into the roof cladding Setting angles from 11 – 15 degrees depending on module length. Designed for module heights from about 1.3 m up to 1.7 m FixZ-15 Lower system profile18 4300 mm Supplier Part No: 121009-04400 Weight: 1.1 kg Length: 4.4 m PV Light: R2+
£56.27 Exc. VAT
£67.52 Inc. VAT
Part No: SLT-121010-440 Mounting - FixZ FixZ-7 The optimum additional elevation for flat or low pitch trapezoidal sheet metal roofs. Quick and easy mounting Better rear airing Better self-cleaning Optimum load transmission into the roof cladding FixZ-7 Lower system profile18 4300 mm Supplier Part No: 121010-440 Weight: 4.4 kg Length: 4.4 m
£48.54 Exc. VAT
£58.25 Inc. VAT
Part No: REN-900015-100 Mounting - Fixings Description Technical Data Material Dimensions Weight Anti-slip protection Hexagon head Stainless steel 6 x 20 mm 0,009 kg pack of 100 pcs Keywords: REN900015, Renusol, PV Mounting, Fixings Supplier Part No: R900015-100 Weight: 0.2 kg Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.
£14.98 Exc. VAT
£17.98 Inc. VAT
Part No: VIR-ARC-M02-01 Mounting - Fixings the VIR-ARC-M02-01 Drop-Mounting Bracket fixes to a solar panel rail with either 8mm or 10mm T-Bolt and is suitable for rail width up to 40mm. The VIR-ARC-04 is attached to one of three mounting points offering different orientations and finishes at a height of 15.5mm above the rail top face. This is ideal when fitting under a parallel mounted low-profile solar module, for example in pitched roof applications. Supplier Part No: ARC-M02-01 Weight: 0.8 kg
£3.25 Exc. VAT
£3.90 Inc. VAT
Part No: VIR-ARC-M04-01 Mounting - Fixings The VIR-ARC-M04-01 Drop Mounting Bracket works with the Renusol F10 system. The bracket pushes onto the side wall of the rail to provide two orientation options for attaching the VIR-ARC-04. Supplier Part No: ARC-M04-01 Weight: 0.8 kg
£2.75 Exc. VAT
£3.30 Inc. VAT
Part No: VIR-ARC-M03-01 Mounting - Fixings The VIR-ARC-M03-01 Mounting Bracket is for use with the Esdec FlatFix System. The bracket slides onto an Esdec cable clip accessory to provide three orientation options for attaching the VIR-ARC-04. Supplier Part No: ARC-M03-01 Weight: 0.8 kg
£2.50 Exc. VAT
£3.00 Inc. VAT
Part No: SLT-119005-001 Mounting - Fixings For sealing on roofs made of trapezoidal sheet metal. Supplier Part No: 119005-001 Weight: 0.026 kg
£1.59 Exc. VAT
£1.91 Inc. VAT
Part No: VIR-ARC-M01-01 Mounting - Fixings The VIR-ARC-M01-01 is a Rail Mounting Bracket which fixes to a solar panel rail with either 8mm or 10mm T-Bolt. The bracket can be rotated before fixing to align the VIR-ARC-04 with the cabling route. Due to the finished height of the VIR-ARC-04 above the rail, The VIR-ARC-M01-01 Bracket is more suitable for flat roofing systems and VIR-ARC-M02-01 is more suitable for pitched roof systems. Supplier Part No: ARC-M01-01 Weight: 0.8 kg
£1.56 Exc. VAT
£1.87 Inc. VAT
Part No: SLT-943763-064 Mounting - Fixings THREADED SCREW, SELF-GROOVING, A2 6.3 x 64 Supplier Part No: SLT-943763-064 Weight: 0.02 kg
£0.24 Exc. VAT
£0.29 Inc. VAT
Part No: SLT-943000-025 Mounting - Fixings M8X20 - BOLT - SH LS ISO4762 - A2-70 DL Hexagon socket screw with locking teeth Supplier Part No: SLT-943000-025 Weight: 0.013 kg
£0.20 Exc. VAT
£0.24 Inc. VAT
Part No: SLT-169018-210 Mounting - FixGrid Fix Grid 18 FixZ-7 Windsafe18 to 2067mm for 72 cell modules Supplier Part No: 169018-210 Weight: 1.5 kg Length: 2.07 m
£19.33 Exc. VAT
£23.20 Inc. VAT
Part No: GSE-SCREW-SIL Mounting - Wood Screws Supplier Part No: VIS2014A Weight: 0.01 kg
£0.26 Exc. VAT
£0.31 Inc. VAT
Part No: GSE-CLAMP-DOUBLE-H21-BLA Mounting - Module Clips Supplier Part No: ART100744 Weight: 0.034 kg
£1.56 Exc. VAT
£1.87 Inc. VAT
Part No: GSE-WEDGES-TWINPACK Mounting - In Roof Supplier Part No: GSE-WEDGES-TWINPACK Items in this pack: 4 Weight: 0.035 kg
£1.01 Exc. VAT
£1.21 Inc. VAT
Part No: GSE-CLAMP-DOUBLE-H26-BLA Mounting - Module Clips Supplier Part No: ART102335 Weight: 0.036 kg
£1.56 Exc. VAT
£1.87 Inc. VAT
Part No: GSE-CLAMP-SINGLE-H26-BLA Mounting - Module Clips Supplier Part No: ART102328 Weight: 0.036 kg
£1.36 Exc. VAT
£1.63 Inc. VAT
Part No: GSE-FRAMEHC-POR-1710-1040 Mounting - In Roof GSE module mounting plate for one portrait PV module including Half Cell with length 1630-1750mm and width 1035-1040mm. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Please note this frame can support modules up to 1765 x 1040mm as an exemption from standard rule and only providing the installer increases the gap between frames. Supplier Part No: ART103174 Weight: 5 kg Length: 1.75 m
£42.75 Exc. VAT
£51.30 Inc. VAT
Part No: GSE-GM-RAIL-CONN Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART105568 Weight: 0.323 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£3.73 Exc. VAT
£4.48 Inc. VAT
Part No: GSE-CLAMP-DOUBLE-H31-BLA Mounting - Module Clips Keywords: GSE, PV Mounting, Module Clip Supplier Part No:ART101288 Weight:0.042 kg
£1.56 Exc. VAT
£1.87 Inc. VAT
Part No: GSE-FRAMEHC-POR-1710-1030 Mounting - In Roof GSE module mounting plate for one portrait PV module including Half Cell with length 1670-1750mm and width 1025-1030mm. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No:ART102293 Weight:5.8 kg Length:1.75 m
£42.75 Exc. VAT
£51.30 Inc. VAT
Part No: GSE-GM-NUT-RND-HEADED-T Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100743 Weight: 0.001 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£0.10 Exc. VAT
£0.12 Inc. VAT
Part No: GSE-GM-S-CLAMP-B-35 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100064 Weight: 0.086 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£2.55 Exc. VAT
£3.06 Inc. VAT
Part No: GSE-FRAMEHC-POR-1710-1045 Mounting - In Roof GSE module mounting plate for one portrait PV module including Half Cell with length 1630-1750mm and width 1040-1045mm. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Please note this frame can support modules up to 1780 x 1045mm as an exemption from standard rule and only providing the installer increases the gap between frames. Supplier Part No:ART104728 Weight:5 kg Length:1.75 m
£42.75 Exc. VAT
£51.30 Inc. VAT
Part No: GSE-GM-S-CLAMP-B-40 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100007 Weight: 0.089 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£2.55 Exc. VAT
£3.06 Inc. VAT
Part No: GSE-FRAME-DPO-1650-1160 Mounting - In Roof GSE In-Roof System™ enables modules installation on every type of roof covering (curved tiles, interlocking, flat tiles, slates, metal, zinc, trapezoidal), as well as on new buildings like retrofit buildings. GSE module mounting plate for one portrait PV module including Half Cell with height 1610-1800 and width 1155-1160 2022 version requires two Frames per-one Panel. Easy and quick to install. Pre-Drilled fixing points Simple Interlocking of the plates from right to left. Installation in portrait and landscape format Ensures a perfect and durable water tightness. Non-flame propagator Compatible with 95% of the framed modules on the market Optimized ventilation along with cable passage via junction boxes for micro-inverters, maximize PV station production Certified and guaranteed for 15 years can be mounted on slopes between 12° and 50°. 150mm of height adjustment possible. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Notice: To generate a design please use GSE's own configurator attached in the documents tab of this product page. Supplier Part No:ART105176 Weight:3 kg
£18.23 Exc. VAT
£21.88 Inc. VAT
Part No: GSE-GM-RAIL-2.4 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART104707 Weight: 2.67 kg Length: 0 m GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£27.67 Exc. VAT
£33.20 Inc. VAT
Part No: GSE-GM-RAIL-3.58 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No:ART105078 Weight:3.981 kg Length:0 m
£35.95 Exc. VAT
£43.14 Inc. VAT
Part No: GSE-GM-TOUCH-UP-SPRAY Mounting - Ground Mount Perfect zinc spray Anti-Corrosive Protection Spray 400mL Outstanding long-term protection and optimum metal surface appearance High layer thickness in first spray pass High degree of safety thanks to optimum weathering protection Minimum amount of time spent, as only one operation is required Good coverage Versatile use with adjustable spray head Large area and minor repairs can be carried out quickly and reliably with the variable spray head. High degree of resistance to running High degree of wear resistance Tested corrosion protection in accordance with DIN. Perfect zinc spray, light: 250 hours Perfect zinc spray: 500 hours Can be used for repairs in accordance with DIN EN ISO 1461 Supplier Part No: ART101025 Weight: 0.4 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£13.09 Exc. VAT
£15.71 Inc. VAT
Part No: GSE-GM-D-CLAMP-B Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART101240 Weight: 0.078 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£2.84 Exc. VAT
£3.41 Inc. VAT
Part No: ESD-1000670 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Supplier Part No: 1000670 Weight: 0.016 kg
£0.48 Exc. VAT
£0.58 Inc. VAT
Part No: ESD-1008085 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Supplier Part No: 1008085 Weight: 0.008 kg
£0.41 Exc. VAT
£0.49 Inc. VAT
Part No: ESD-1008020 Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clamps are standard equipped with theft delay screws and are available in the colors black and gray. Supplier Part No: 1008020 Weight: 0.059 kg
£3.11 Exc. VAT
£3.73 Inc. VAT
Part No: ESD-1008064 Mounting - Pitched Roof The Clickfit Evo installation aid is made of high-quality UV-stabilized plastic composite and is resistant to the prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hung on the ClickFit mounting rail. During the transfer of the solar panels, the cables of the solar panel can be clicked into the mounting aid. This provides considerable ease of assembly and contributes to working on the roof. The mounting aid is clicked into the existing mounting holes of the solar panel and is suitable for all solar panels. Supplier Part No: 1008064 Weight: 0.01 kg
£0.96 Exc. VAT
£1.15 Inc. VAT
Part No: ESD-1008045 Mounting - Pitched Roof Quick & flexible installation with the ClickFit EVO Universal Roof Truss Universal Roof Truss for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting Integrated cable management. Supplier Part No: 1008045 Weight: 0.601 kg
£7.42 Exc. VAT
£8.90 Inc. VAT
Part No: ESD-1007022-WP Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Contains mounting in the new metal insert. Supplier Part No: 1007022-WP Weight: 0.055 kg
£1.26 Exc. VAT
£1.51 Inc. VAT
Part No: ESD-1003022-B Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Supplier Part No: 1003022-B Weight: 0.018 kg
£2.35 Exc. VAT
£2.82 Inc. VAT
Powerland’s solar mounting systems are built to safely and efficiently install your solar panels, ensuring they are positioned for maximum energy output while maintaining the structural integrity of your roof. We also offer a range of installation options, so please feel free to contact us today!
